Baileigh Industrial

• Mitutoyo 2 Axis DRO - Standard
• Yaskawa Inverter Head
• Pneumatic Inverter Head
• Power Feed On X, Y, Z Axis

• 14" Blade
• Variable speed, inverter driven with digital readout for rpm
• Miters 45º Left & Right
• 4.7" Round Tube Capacity at 90º

• Spindle Speeds 8
• Spindle Travel 5"
• Spindle Speed Range 80, 140, 230, 350, 650, 1100, 1800, 2760 RPM
• T-Slot Width 5/8"

• Working Table Size: 60” x 100”
• Z Axis Travel: 3.4”
• Table Load Capacity: 1" Mild Steel @ 48” x 96”
• Drive: Stepper Motor

• 10" Blade
• Manual Feed
• Mieters up to 45º left and right
• 110V, 1PH

• 59" x 59" working area.
• BobCAD-Cam Express programming software Included
• Travel Speed: 315 Inches Per Minute
• Table Height: 19.6”

• Travel Speed 315 Inches Per Minute
• Table Dimensions 60" x 140"
• Table Load Capacity 1" Mild Steel
• Capacity Depends on Plasma System Chosen

• Spindle Speeds 60 - 4,200RPM Infinitely Variable
• Distance from Spindle to Table 18.5"
• Spindle Travel 4.9"
• Spindle Speed Range 60 to 4200 RPM

• Mitutoyo 2 Axis DRO - Standard
• Yaskawa Inverter Head
• Pneumatic Power Draw Bar
• Power Feed On X, Y, X Axis

• 3-Axis DRO - Standard
• NST 40 Spindle Taper
• Power Feed On X, Y, Z
• Turcity B® Coated Ways And Guides For Extreme Durability

• 9" Blade
• Manual Feed with Integrated Coolant System
• Miters 45º left
• 110V

• Travel Speed: 315 Inches Per Minute
• Table Load Capacity: 1" Mild Steel
• Capacity: Depends on Plasma System Chosen
• Drive: Servo Motor

• Mitutoyo 2 axis DRO - standard 
• Power feed on X, Y, and Z axis 
• Standard table and knee locks 
• Way covers and chip tray 

• 12.5" Blade
• Manual Feed
• 4" Tube at 90º
• 220V, 1PH

• Mitutoyo 2 axis DRO - standard 
• Power feed on X, Y, and Z axis 
• Standard table and knee locks
• Way covers and chip tray included 

• Table Dimensions 29" x 31"
• Speed Number Infinite
• Table Load Capacity 3/4" Mild Steel
• Capacity Depends on Plasma System Chosen

• 11" Blade
• Manual Feed
• Miters up to 45º Left & Right
• 110V, 1PH

• Table Size 54" x 10"
• Spindle Center To Column Min Max 7.87" – 26.77"
• Spindle Diameter 3.93"
• Spindle Feed Per Rev .0015"/.003"/.006"

• 14" Blade
• Miters 45º Left & Right with self centering vice
• 220V, 3PH
• 4.33" Round Tube Capacity at 90º

• Material Thickness: 0.39” – 2.95”
• Max. Drill Capacity: 1.25”
• Base Size: 8.26” x 3.93” x 1.77”
• Maximum Stroke: 6.69”

• Miters left and right 
• Centering vise 
• Cuts non-ferrous metals 
• Blade turns at 3200 rpm

• 41/4" Capacity
• Pneumatic centering vise, hydraulic blade descent
• Automatic shut-off and vise release
• 220V, 3PH

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

• Pneumatic centering vise w/ Stock stop mechanism
• 41/4" Capacity
• 220V, 3PH
• 14" Blade