Baileigh Industrial

• 44 Ton (4 Station Ironworker) 
• Oversize Tables with Adjustable Stops 
• Foot Pedal Controlled 
• Material Hold Downs 

• 14" Blade
• Variable speed, inverter driven with digital readout for rpm
• Miters 45º Left & Right
• 4.7" Round Tube Capacity at 90º

• 10" Blade
• Manual Feed
• Mieters up to 45º left and right
• 110V, 1PH

• Spindle Speeds: Inverter Driven Variable
• Max. Drill Capacity: 1
• Tapping Capacity: 5/8"
• Drill Capacity Cast Iron: 1-1/16"

• 12.5" Blade
• Manual Feed
• 4" Tube at 90º
• 220V, 1PH

• 44 Ton (4 Station Ironworker) 
• Single Phase 220 Volt 
• Foot Pedal Controlled 
• Material Hold Downs 

• 11" Blade
• Manual Feed
• Miters up to 45º Left & Right
• 110V, 1PH

• Variable-speed inverter-driven head
• 3-speed power down feed
• Auto reverse tapping feature
• Digital RPM readout

• Spindle Speed 150-3000rpm
• Spindle Travel 5.3" 
• Drill Capacity Steel 1" 
• Quill Diameter 2.44" 

• 14" Blade
• Miters 45º Left & Right with self centering vice
• 220V, 3PH
• 4.33" Round Tube Capacity at 90º

• 2.95" Quill Diameter 
• Spindle Speed 85-2000rpm 
• 2HP Motor 
• 1.5" Drill Capacity 

• True Vertical Movement At All Stations
• Electronic Stroke Control
• Manual Back Gauge
• Quick Release Coupler Enables Easy Tool Changeover

• 62 Ton 
• Single Phase 220 Volt 
• Easy Tooling Setup 
• Electronic Stroke Control 

• Miters left and right 
• Centering vise 
• Cuts non-ferrous metals 
• Blade turns at 3200 rpm

• 62 Ton 
• Electronic Stroke Control 
• Manual Back Guage 
• Jog Feature For Easy Tooling Setup 

• Dual Cylinder / Dual Operator Design
• Oversize Tables With Quick Adjust Material Stops
• Electric Back Gauge With Adjustable Timer
• Quick Release Coupler Enables Easy Tool Changeover

• Electronic Strock Control 
• 220 Volt Single Phase 
• Quick Release Coupler 
• 4 Stations 

• 41/4" Capacity
• Pneumatic centering vise, hydraulic blade descent
• Automatic shut-off and vise release
• 220V, 3PH

• Pneumatic centering vise w/ Stock stop mechanism
• 41/4" Capacity
• 220V, 3PH
• 14" Blade

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

• Spindle Taper MT3
• Table Slot .625"
• Tapping Capacity 1/2"
• Main Motor 2 hp

• 1/8HP Coolant Motor 
• 1.5" Drill Capacity 
• 85-4000rpm Spindle Speed
• Tapping Capacity 3/4" 

• Spindle Travel: 5.9"
• Quill Diameter: 2.44”
• Tapping Capacity: 5/8"
• Drill Capacity: 1.25"

• 11" Blade
• Miter both ways, Stop Mechanism
• 23/4" Capacity
• Self centering vice