Table Saws

• 7.5 hp motor with 4 speeds: 3,000, 4,000, 5,000, and 6,000 rpm.
• Set the RPM by manually moving the belts to different gears.
• Digital readout (DRO) shows the blade speed to help with repeatability.
• Comes standard with a 12” blade, but accepts up to a huge 16” blade.

• 12" Blade
• 3600 RPM
• Maximum rip cut (right) 52"
• 220V, 1PH

3 HP
4300 RPM
220 V 1PH
5/8" Saw Harbo

• 5 hp three phase main motor with 1 hp scoring motor
• Max rip cutting width: 51.2”
• Sliding table dimension: 126″ x 14.9″
• Blade tilting adjustment: 0°~45°

• 5 HP single phase main motor with 1 HP scoring motor
• 51″ rip capacity
• Sliding table dimensions: 10 ft. x 14”
• Blade tilt: 0 – 45°

• Sliding Table: 63″
• Rip Fence: 51″
• Main Blade Speed: 4000 RPM
• Motor: 5HP, 220V, Single Phase

• 7.5 hp three phase main motor with 1 hp scoring motor
• Max rip cutting width: 51.2”
• Sliding table dimension: 126″ x 14.9″
• Blade tilting adjustment: 0°~45°

• Sliding Table: 126″
• Rip Fence: 51″
• Main Blade Speed: 4000 RPM
• Motor: 7.5HP, 220V, Three Phase

• Sliding Table: 126″
• Rip Fence: 51″
• Main Blade Speed: 4000 RPM
• Motor: 5HP, 220V, Single Phase

• 5 hp single phase main motor with 1 hp scoring motor
• Max rip cutting width: 51.2”
• Sliding table dimension: 102.4″ x 14.9″
• Blade tilting adjustment: 0°~45°

• Programmable rip fence with maximum cutting width of 51”
• Motorized blade rise/fall
• Motorized blade tilting with electronic angle display on control panel
• 7.5 HP main motor with 1HP scoring motor

• Sliding table dimension: 63” x 12.4”
• 5 HP Single Phase main motor with ¾ HP scoring motor
• Cutting width – ripping: 51” max
• 0-45° Manual Tilting adjustment for main saw blade

• Rip Capacity: 36”
• Arbor Size: 5/8″
• Max. Depth of Cut At 45°: 2 1/8″
• Motor: 1.75HP, 110V, Single Phase

• 12-14" Blade
• 3000 - 5000 RPM
• 15' x 125" sliding table
• 220V, 3PH

• 110/220V 1 PH (Prewired 110V)
• 1.75 Horse Power
• Maximum Rip Cut (Right) 36"
• 4000 RPM

• Rip Capacity: 36”
• Arbor Size: 5/8″
• Max. Depth of Cut At 45°: 2 1/8″
• Motor: 3HP, 220V, Single Phase

• 5 HP
• 3600 RPM
• 1" Table Harbor
• 220V 1 PH

• Programmable rip fence with maximum cutting width of 51”
• Motorized blade rise/fall
• Motorized blade tilting with electronic angle display on control panel
• 7.5 HP main motor with 1HP scoring motor

• Max. depth of cut at 90°: 5 1/2″
• Max. depth of cut at 45°: 3 7/8″
• Table size: 48″x 38″
• Table height: 34 1/4″

• 220V, 1PH Motor
• 4300 RPM
• 3HP
• 10" Blade

• 220V 1 PH
• Table Saw 3850
• Table Size 20"
• Blade Diameter 10"

• Max. depth of cut at 90°: 4″
• Max. depth of cut at 45°: 2 3/4″
• Table size: 48″x30″
• Electrics: 230/1/60

• Rip Capacity: 30”
• Arbor Size: 5/8″
• Max. Depth of Cut At 45°: 2 1/8″
• Motor: 1.5HP, 110V, Single Phase

• Rip Capacity: 52”
• Arbor Size: 5/8″
• Max. Depth of Cut At 45°: 2 1/8″
• Motor: 3HP, 220V, Single Phase