Shop Fox 3HP 230V Single Phase 8” x 76” Parallelogram Jointer with Helical Cutterhead and Mobile Base W1860
Manufacturer Part: | EMT ID: |
W1860
|
17689
|
- Table type: Precision-Ground Cast Iron
- Table adjustment: Parallelogram
- Cutterhead type: Helical
- Max depth of cut: 1/8 in.
Description
The W1860 8" x 76" Parallelogram Jointer with Helical Cutterhead and Mobile Base features extra-long infeed and outfeed tables that can be adjusted transversely and longitudinally to each other for ultra-precision face planing and edge jointing. This Jointer has a 4-row helical cutterhead with 36 indexable carbide inserts. Carbide inserts reduce tear-out and last an average of 10 times longer than traditional jointer knives. Because of the upgrade to the indexable inserts, there is no more changing or sharpening replacement knives every time one gets dull or nicked. Each insert can each be rotated up to three times to expose a new sharp edge for superior finish. Reducing the cut to the size of a single insert makes for a cleaner cut and reduces noise compared to the traditional straight knife cut. Table levers with positive table locks provide quick and precise height adjustments, and the pedestal-mounted switch is conveniently located for easy on and easy off. Like all Shop Fox jointers, the W1860 comes with a 2-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The W1860 manual was written by Shop Fox's U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your jointer. The Woodstock Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the jointer may be available online and shipped from the Woodstock parts warehouse in Springfield, MO.
Features
- Parallelogram Table Adjustment
- Lever‐Adjusted Tables with Depth Gauge
- Pedestal‐Mounted Power Switch for Easy Access
- Center‐Mounted Fence with Rack‐and‐Pinion Adjustment
- 4" Dust Port with Built‐In Dust Chute
- Helical Cutterhead with 36 Indexable Carbide Inserts
- Precision‐Ground Cast‐Iron Tables
- Sturdy Cabinet Stand with Built‐In Mobile Base
- Rabbeting Table
- Extra Long 40" Infeed Table
- Sealed and Permanently Lubricated Bearings
- Powder‐Coated Finish
Specifications
- Product Dimensions
- Weight: 365 lbs.
- Width (side‐to‐side) x Depth (front‐to‐back) x Height: 76 x 25 x 41‐1/2 in.
- Footprint (Length x Width): 40 x 16 in.
- Electrical
- Power Requirement: 230V, Single‐Phase, 60 Hz
- Motor Size: 3 HP
- Full‐Load Current Rating: 12A
- Minimum Circuit Size: 20A
- Connection Type: Cord & Plug
- Power Cord Included: Yes
- Power Cord Length: 6 ft.
- Power Cord Gauge: 14 AWG
- Plug Included: Yes
- Included Plug Type: 6‐20
- Switch Type: Push Button Magnetic w/Large Shut‐Off Paddle
- Main Motor
- Horsepower: 3 HP
- Phase: Single‐Phase
- Amps: 12A
- Speed: 3450 RPM
- Type: TEFC Capacitor‐Start Induction
- Power Transfer: Belt Drive
- Bearings: Sealed & Permanently Lubricated
- Centrifugal Switch/Contacts Type: External
- Jointer Size: 8 in.
- Bevel Jointing: 0 – 45 deg. L/R
- Maximum Width of Cut: 8 in.
- Maximum Depth of Cut: 1/8 in.
- Minimum Workpiece Length: 10 in.
- Minimum Workpiece Thickness: 1/2 in.
- Maximum Rabbeting Depth: 1/2 in.
- Number of Cuts Per Minute: 22,000
- Fence
- Fence Length: 38 in.
- Fence Width: 1‐1/4 in.
- Fence Height: 4‐1/2 in.
- Fence Stops: 45, 90, 135 deg.
- Cutterhead
- Cutterhead Type: Helical
- Cutterhead Diameter: 3‐1/16 in.
- Number of Cutter Rows: 4
- Number of Indexable Cutters: 36
- Cutterhead Speed: 5500 RPM
- Cutter Insert
- Cutter Insert Type: Indexable Carbide
- Cutter Insert Length: 15 mm
- Cutter Insert Width: 15 mm
- Cutter Insert Thickness: 2.5 mm
- Table
- Table Length: 76 in.
- Table Width: 8 in.
- Table Thickness: 1‐3/4 in.
- Floor to Table Height: 31‐1/4 in.
- Table Adjustment Type: Lever Action
- Table Movement Type: Parallelogram
- Construction
- Body Assembly: Cast Iron
- Cabinet: Sheet Metal
- Fence Assembly: Precision‐Ground Cast Iron
- Guard: Die‐Cast Aluminum
- Table: Precision‐Ground Cast Iron
- Paint Type/Finish: Powder Coated
- Number of Dust Ports: 1
- Dust Port Size: 4 in.
- Mobile Base: Built‐In
Manufacturer | |
SKU |
W1860
|
UPC |
754001003965
|
Shipping Method |
LTL Freight
|
Weight |
490 lb
|
Dimensions |
85 × 26 × 43 in
|
Country of Origin |
Taiwan
|
Warranty |
2 Years
|