Marvel MSIW60D Spartan Ironworker MSIW60D

FREE SHIPPING

Manufacturer Part: EMT ID:
MSIW60D
9627

  • Ironwork with 60 Ton Capacity
  • 7-1/2 H.P.
  • 10” Throat
  • 5 Work Stations
Details below

Descripion 

Standard spartan MSIW60D heavy-duty, dual cylinder, completely integrated ironworker with 60 ton capacity, 7-1/2 h.p., 10” throat, 5 work stations, and simultaneous dual operation

The double acting punch cylinder is machined and faced to assure proper alignment of the cylinder shaft under maximum load. Cylinder stroke length is adjustable both top and bottom with two easily set limit switches. The see-through stripper provides full view of punch for ease of alignment and operation. The stripper is also adjustable for varying thickness of material. The die holder will accept standard tooling and has two hole sizes (D and DX series only). The die holder slides in and out on two T-slots for ease of alignment and makes tooling changeover quick and trouble-free. The overhanging feature of the die holder allows for punching channel flange. The punch table provides support for the workpiece and also incorporates a worktable scale and an adjustable back stop for gauging. The punch work table is segmented and the front portion can be removed for punching angle iron.

Specifications 

PUNCHING

Punch Pressure:  60 tons.
Punch Holder and Jog Mode
Punch Work Table: Includes back gauge and adjustable stops.
Adjustable See-Through Punch Stripper: For fast and easy            
      setup.
Die Holder:  Adjustable in machined T-slots for quick punch            
      and die alignment.
Standard Tooling:  1-1/2” in 1/2”.
CPD Series: 26 punch, 62 die.
Large Tooling:  2” in 3/8"
CPD Series: SP51P punch, SP80D die.
Optional Oversize Tooling:  4” in 3/16” material.
Throat Depth:  10”
Stroke Length:  2-5/16”.
Cycles per Minute in 3/4”:  25.
Punching Station Work Height:  40-9/16”

FLAT BAR SHEARING

Flat Bar Shear Capacity:  12” in 1/2”.
Maximum Width x Thickness:  8” in 3/4”.
Lower Blade:  Four (4) usable edges.
Support Table:  Includes guides for accurate positioning and  
      indicator lines at 30 and 45 degrees left and right.
Adjustable Hold-Down:  Holds work piece securely in position
      when shearing.
Upper Shear Blade:  Provides for minimum distortion.  Two (2)
      usable edges.
Blade Length:  12-1/2”.
Angle Flange Trim:  3”.
Flat Bar Shear Work Height:  35-3/4”

ANGLE SHEARING

Maximum Capacity – 90 degrees:  4” x 4 x 1/2”.
Maximum Capacity – 45 degrees:  2-1/2” x 2-1/2 ” x 3/8”.
Shearing with no material loss and minimum deformity.
Shear Blades:  Four (4) usable edges.
Angle Shear Work Height:  44-1/2”.
BAR SHEARING

Round Bar Max. Capacity:  1-1/2”.
Square Bar Max. Capacity:  1-1/2” x 1-1/2”.
Six Cavity Round and Square Bar Shear Sizes:
   Round:   , 1/2”, 1”, 1-1/2”
   Square:   3/4”, 1-1/2”
Channel Shear Max. (optional):  4”.
I-Beam Shear Max. (optional):   4”.
Bar Shear Work Height:  44-1/2”

NOTCHING

Rectangular Notcher:  1-3/4” x 3-1/2” x 3/8”.
Electrical Interlock Safety Guard
Gauge Table with Stops:  For precise positioning.
Notcher Work Height:  35-1/2”.

OTHER STANDARD EQUIPMENT

Five (5) Sets of Punches and Dies: 
Punches:  9/16”, 11/16”, 13/16”, 15/16”, 1-1/16”
Dies:  19/32”, 23/32”, 27/32”, 31/32”, 1-3/32”
CPD Series:  26 punch, 62 die.
Magnetic Base Work Light
Adjustable Electric Back Gauge (36”)14232
24 Volt DC Control Voltage
Scrap Boxes at Punching and Notching Stations
Adjustable Stroke Depth at Punch
Two (2) Full-Control Foot Pedals
Two (2) Hole Die Holders
Two (2) Piece Gauging Table at Punch Station
Keyed Punch Holder for Shaped Tooling
Standard Voltage 230 or 460 Volt, 3 Phase, 60Hz
Machine Net Weight:  3350 lbs
Machine Dimensions:  60” L x 39” W x 74” H
3’ Electric Back Gauge

Manufacturer
SKU
MSIW60D
Shipping Method
LTL Freight
Weight
3,350 lb
There are currently no reviews for this product.
Be the first to review this product.
Looking for parts? Let us know what you need in the form, or give us a call at 281-241-9504
Marvel MSIW60D Spartan Ironworker MSIW60D
  • Marvel MSIW60D Spartan Ironworker MSIW60D at Elite Metal Tools
Request Sale Price

This product might qualify for a promotional price. Fill this out and we'll get a quote out to you right away!

Request Financing?