BPX Solutions 110V 15” Seal Bar Gravity Drop Sealer with Bag Opener PP-615/402 Combo

Description

“Preferred Pack” Model PP-615/402 Combo. Drop Sealer and Bag Opener all on one frame. Operator loads product into either a wicketed bag or a pre-made bag that is customer supplied or used with customer supplied bag opener and then pusher product forward through the seal jaw area and slides product into drop sealer which will automatically seal the bag. As product with bag slides into position it will activate the micro switch which in turn activates the bar sealer which pneumatically closes the seal jaw and the bag is sealed with a flat band ribbon then a hot wire cuts off the excess film at the top of the bag. A burst of air blows off the excess scrap and the holding pins re-track allowing the product to slide off the machine.

Standard Features

• PLC Controlled
• Hand Wheel Adjustment for Bag Length – allows operator to set finger position to suit bag length desired.
• Dual Dial Controls for Seal Temperature and Seal Time
• Double Line Seal – Flat heated sealing ribbon produces 1/8” wide seal and round wire seals and cuts bag.
• Stainless Steel Safety Plate – Activates and returns seal head to upright open position if a person’s hand is under seal bar when it comes down.
• Speed of 15-25 PPM – Can be obtained depending on product length, bag size and bag thickness.
• Seal Bar Width 15”
• Maximum Seal Thickness 20 mill Total
• Large Seal Bar Opening with 6” of Clearance.
• Maximum Bag Length: 20”
• Photo Eye Sees Package and Signals Seal Head to Close
• Air Blast Blows Scrap Away
• Adjustable Handle to Raise or Lower Seal Height – Pneumatic Cylinder Raises and Lowers Upper Seal Bar
• Air Regulator with Oil Lubricator
• Casters
• Air velocity control allows operators to adjust flow of air going into bag.
• All stainless steel decking.
• Adjustable side guides for different bag widths.
• Double pillow block bearing for stability and long-lasting durability.
• Filtered air is blown into bag for cleanliness.
• Will accept bags up to 16” wide.
• Rear access door panel with storage shelves.

Specifications

• Electrical: 110V, 10 amp
• Seal Width: 15”
• Max Jaw Opening: 6”
• Max Bag Width: 16”
• Max Bag Length: 20”
• Production Rate: Up to 25 PPM
• Air: 2 CFM at 80 PSI
• Warranty: 1 year on all parts
• Machine Dimensions: 40” x 26” x 40”
• Weight: 275 lbs
• Bag Opener
  • All Metal Chassis with Stainless Steel Contact Parts
  • Blower Motor with Air Volume Control
  • Adjustable Product Guides
  • Bags to 16” wide (Larger Models Available to 22” wide)
  • Rapid Replacement of Bags into Magazine Holder (Using “Wicketed” Bags)
  • 1 Year Limited Warranty

Available Options & Accessories

• Spare Parts Kit
• Pneumatic Air Expeller
• INC-52 Incline Conveyor with White Plastic Belt with Cleats
  • INC-52-9 (9”-230mm wide conveyor)
  • INC-52-16 (16”-400mm wide conveyor)
  • INC-52-24 (24”-610mm wide conveyor)
• Available in 220V, Single Phase (Special Order)
• Upgrade to IP-67 Wash Down Motor
• Upgrade to 2” Stainless Steel Leveling Casters
• 4” Polypropylene Side Guides (Per Side)
• Cleat Height of 50mm/2”
• Cleat Height of 75mm/3”
• Accumulation Turntables