Betenbender 20HP 208V Three Phase 3/8” 14ft High Profile Hydraulic Shear BB38SH14

Description

It takes a shear that can make a razor-sharp cut time after time. Betenbender overdriven and underdriven Hydraulic Shears are designed to do exactly that. Choose from a family of nine different models: 1/8” (10 GA), 3/16”, 1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 1”, and 1-1/4”.

Betenbender designs simplicity and safety into its shears – with an advanced hydraulic system and flexible operation. They’re easy to operate, easy to maintain and able to withstand the rigors of today’s production demands. A wide range of options are available.

Controls: Push button and switch controls are at your fingertips. The fully guarded, 2-position 110v footswitch lets you interrupt the cutting stroke at any point in its cycle.

Easy Material Handling: A sturdy backgauge and rake angle adjustment minimizes twist and distortion. This makes it possible to increase the rake for cutting heavier stock and extend maximum capacity of the machine. A 4’ squaring arm with a recessed scale makes for fast, easy measurement.

Precision Cutting System: Betenbender’s single piece top and bottom, high carbon, high chrome shock resistant knives provide four separate edges for clean cuts and long blade life. Easy blade gap adjustment means precise cuts for a wide variety of materials.

Electrical System: Meets NFPA 79 and construction requirements of the ANSI B11.4. All machines have disconnect switches, magnetic starters, 110/120v controls, and 208-230/460v 3 phase, others optional.

Backgauge: A Betenbender Shear is capable of shearing 1/8” (10 GA) material to the following tolerance: Dimension – The width of the off-cut portion of the workpiece is within +/- 0.005 inch of the backgauge setting.

Features

• 208-230/460v 3 phase
• 36” Power Backgauge with LED Readout Inch/Metric
• 4’ Squaring Arm with Inlaid Scale
• All Hydraulic Fluids Included
• All Steel Construction
• American Made Hoses and Fittings
• American Made Motor and Valves
• Disconnect Switch
• Hour Meter
• Hydraulic Pressure: 2250 psi
• Hydraulic Self-Compensating Holddown Bar Assembly
• Light Beam Gauge (Shadow Line)
• Linemaster Foot Switch
• Manual Rapid Blade Gap Adjustment (3/8” and Larger)
• Manual Swingup Backgauge
• NEMA Electrics
• Power Adjust Variable Rake
• Safety Switch for Front Guard
• Single Piece Top and Bottom, Shock Resistant Knives with Four Cutting Edges

Specifications

• Rake Angle Per Rated Capacity: 3/8”
• End Plate Width: 48”
• Machine w/ Backgauge: 80”
• Squaring Arm Length (4’ Std.): 24”
• Knife Size: 1” x 4”
• Strokes Per Minute: 9
• Number of Holddown Pins: 23
• Phase: 3
• Amps: 52
• Voltage: 208V
• HP: 20
• Anchor Bolt Dimensions (L x W): 176” x 55”
• Weight: 27,000 lbs.
• Overall Dimensions (L x W x H): 195.5” x 55” x 84”

Options

• NC Control 5 Station “Go To” Positioner
• 48” Support Arms/Front Gauges*
• Inlaid Scales
• Disappearing Stops (Support Arms)
• Machined Solid Table Top Bed
• Neoprene Hold-down Caps*
• Solid Table Top – Bolt on Segments*
• One Shot Lubrication System*
• Auto Lubrication System
• Oil Cooler
• Oil Cooler (Kidney Loop System)
• Ball Transfer
• Angle Gauge
• Electronic Stroke Control
• Continues Stroke (Includes stroke counter)
• Stroke Counter
• Independent Hold-down Control
• Extra Foot Pedal w/ Keylock Switch
• Extended Squaring Arm (4’ standard)
• Flip Up Stops (Squaring Arm)
• Left Hand Squaring Arm
• Dovetail Slots or T Slots
• Keylock Switch
• Operator Station Palm Control
• Light Curtain
• Increase HP (Increase Stroke)
• 2 Position Power Blade Gap Adjustment
• 3 Position Power Blade Gap Adjustment*
• Pneumatic Sheet Support
• Gap Type Machine (Slitting)
• Special Paint Colors
• Other Electrics and Motors
• Bolt and Shim Kit for Leveling
• Special Crating
• Backgauges
  • Power-Lift
  • Automatic Power-Lift*
  • Extra Length on Backgauge
  • CNC Backgauge

*Recommended options