BendPak 220V Single Phase 9,000 lbs. Narrow High Lift Medium Duty 4-Post Lift BEN HD-9STX
Manufacturer Part: | EMT ID: |
BEN HD-9STX
|
18207
|
- Lifting Capacity: 9,000 lbs.
- Max. Rise: 82"
- Overall Width: 100.25"
- Overall Length: 224"
Description
The HD-9STX is BendPak’s tall and narrow four-post lift that combines a small horizontal footprint with extended-height runways, so higher-clearance vehicles can be easily parked underneath.
The HD-9STX is your 9,000-lb. rugged lifting solution for when you need get something heavy and high, but you don't have a lot of space on the ground. Perfect for vehicle storage and service—in the shop or garages with high ceilings. Whether you're a service professional or a DIY'er, BendPak’s got the right lift for you. This model is available with optional casters, drip-trays, jack platform and more.
With more height to work with, this lift does something others do not: it fits trucks and SUVs in the lower level. This is essential for parking purposes, especially if your lower-level vehicle is too heavy for the runways. A high-rise lift also increases the comfort of techs working underneath. Pulling transmissions and draining oil is safer and easier on high-rise car lift. The HD-9STX eliminates stooping and awkward straining when accessing the vehicle underbody. When you’re uncomfortable, you’re more likely to make mistakes, and there’s nothing better than a car lift that lifts to the perfect height. The HD-9STX maximizes versatility in a car lift that adapts to your height and lifestyle. The narrow designs fits in the same floor space as the HD-9ST but requires a bit more ceiling height to fully enjoy.
Features
- 9,000-lb. maximum lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
- Freestanding design
- Narrow-width
- High-rise
- Perfect for parking, storage, and service
- Runways accommodate narrow and standard vehicles
- Runways include rail-kit for optional accessories
- Electric / hydraulic power system
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks and sheaves
- Internal anti-sway slider blocks in each column
- Oversized self-lubricating cable rollers
- Features heavy-duty 3/8" aircraft cable
- Rugged 1.25" roller axles
- Multi-position safety locks in each column
- Adjustable lock ladders
- Push-button pneumatic safety release
- Independent backup slack-cable safety latches
- Customizable power unit location
- Removable approach ramps for additional drive-under clearance
- Longer approach ramps for low-ground clearance vehicles
- Optional drive-thru ramps available
- Optional drip trays available
- Optional solid deck available to increase storage capacity
- Optional 4,500-lb. air / hydraulic rolling jacks available (Model RJ-45)
- ETL Approved
- Warranty
- 5 Years on Lift Structure
- 2 Years on Hydraulic Cylinder(s) and Power Unit
- 1 Year on Operating Components
- 1 Year on Electrical Components (Excluding Power Unit)
- 1 Year on Labor
Specifications
- Capacity
- Lifting Capacity: 9,000 lbs. (4,082 kg)
- Max Capacity / Front Axle: 4,500 lbs. (2,041 kg)
- Max Capacity / Rear Axle: 4,500 lbs. (2,041 kg)
- Rise
- Min. Runway Height: 4.5" (114 mm)
- Max. Rise: 82" (2,083 mm)
- Max. Lifting Height: 86.5" (2,197 mm)
- Time to Full Rise: 50 seconds
- Dimensions
- Overall Width: 100.25" (2,546 mm)
- Outside Length: 198" (5,029 mm)
- Overall Length: 224" (5,690 mm)
- Height of Columns: 100" (2,540 mm)
- Width Between Columns: 89.75" (2,280 mm)
- Drive-Thru Clearance: 76.5" (1,943 mm)
- Runways
- Runway Width: 19" (483 mm)
- Length of Runways: 188" (4,775 mm)
- Width Between Runways: 37.5" (953 mm)
- Runway Centerline: 56.5" (1,435 mm)
- Outside Edge of Runways: 75.5" (1,918 mm)
- Minimum Wheelbase
- Rated Capacity: 135" (3,429 mm)
- 75% Capacity: 115" (2,921 mm)
- 50% Capacity: 95" (2,413 mm)
- 25% Capacity: 80" (2,032 mm)
- Locking
- Locking Positions: 15
- Lock Spacing: Every 4" (102 mm)
- Power Unit
- Motor: 220 VAC / 60 Hz / 1 Ph
- Noise: 45 dB
- Shipping
- Weight: 1,782 lbs. (808.3 kg)
- Dimensions: 190'' x 22'' x 35'' (4,826 mm x 559 mm x 889 mm)
Options
- 5150029 – LITESTIX™ LS36SMD: Lithium Rechargeable Underhood Work Light / 1,200 Lumens
- 5210997 – Caster Kit: Portable Wheel Kit / Fits HD-7 and HD-9 Series Four-Post Lifts / SET OF 4
- 5150509 – Rolling Oil Drain Pan: 15 Gallon Rolling Drain Pan For 4-Post Lifts
- 5175349 – JP-6: 6,000-lb. Capacity / Telescoping Sliding Jack Platform
- 5175801 – Boat Trailer Platform: 3,000-lb. Capacity / Telescoping Boat Trailer Tongue Platform
- Drive-thru ramps
- Drip trays
- Solid deck to increase storage capacity
- 4,500-lb. air / hydraulic rolling jacks (Model RJ-45)
Manufacturer | |
SKU |
BEN HD-9STX
|
Shipping Method |
Flatbed
|
Weight |
1,782 lb
|
Dimensions |
190 × 22 × 35 in
|
Warranty |
1 Year
1 Year
|