Welding Equipment

  • Heavy Cast Iron Construction
  • Finished Machined Top to .0025" Tolerance Per Foot
  • 1-1/8" Holes, 4" on Center
  • 1" Thick  Top and Sides
$4,245
As low as $137.96/mo

  • Speed 0 – 6 rpm (Variable)
  • Thru Hole OD 2-3/8"
  • Chuck Capacity 1/4" OD/10-3/4" ID
  • Chuck Size Three Jaw 8"
MSRP: $7,615.91
$5,969
As low as $193.99/mo

  • Platen dims: 36” x 36” x 2”
  • Platen thickness: 1.5”
  • Stand size: 36” x 36” (3ftx3ft)
  • Height of Platen & Stand: 36” 
$3,655
As low as $118.78/mo

  • Working Table Size: 48" x 48"
  • Table Height: 36"
  • Number of Mounting Surfaces: 5
  • Mounting Hole Size: 16mm
MSRP: $2,432.53
$1,999
As low as $64.96/mo

  • Power Supply (Dual Voltage): 115-230V / Single Phase / 50-60Hz 
  • Power: 100 W / 0.13 HP
  • Horizontal speed: 0 – 47-3/8” per min
  • Vertical speed: 0 – 43-5/16” per min 
$9,485
As low as $308.26/mo

  • Power Supply (Dual Voltage): 115-230V / Single Phase / 50-60Hz 
  • Power: 100 W / 0.13 HP
  • Horizontal speed: 0 – 47-3/8” per min
  • Vertical speed: 0 – 43-5/16” per min 
$7,885
As low as $256.26/mo

  • Maximum weight capacity horizontal: 675 pounds
  • Maximum weight capacity vertical: 325 pounds
  • Diameter Hand Wheel: 8”
  • Floor base: 48″ x 51″
$2,470
As low as $80.27/mo

  • Platen dims: 30” x 60” x 5.5”
  • Platen thickness: 1.5”
  • Stand size: 30” x 60” (5ftx6ft)
  • Height of Platen & Stand: 32” 
$5,445
As low as $176.96/mo

  • Cooling System: Fan Cooled
  • Rated Input Current: 20A
  • Power Factor: 0.75
  • Insulation Class: F
MSRP: $1,486.53
$1,270.50
As low as $41.29/mo

  • Hole size range: 1/2"- 8" (1.5mm-203mm)
  • Motor: 3 amp, 110V
  • Max. torch diameter to fit collar: 1 1/2" (38mm)
  • Variable speed control to match correct cutting speeds with plate thickness
MSRP: $1,895
$1,685
As low as $54.76/mo

  • AC/DC Tig Welding
  • AC Welding for Aluminum and Steel
  • 60% Duty Cycle
  • Amperage Range Output: 10-250
$999
As low as $32.46/mo

  • 10.2" Minimum Height 
  • 660lbs Capacity 
  • Manual 
  • Table Size 32"x20"
MSRP: $1,297.99
$825
As low as $26.81/mo

  • Hole size range: 1/2" - 3" (1.5mm-76mm)
  • Motor: 3 amp, 110V
  • Max. torch diameter to fit collar: 1 1/8" (28mm)
  • Variable speed control to match correct cutting speeds with plate thickness
MSRP: $925
$835
As low as $27.13/mo

  • On/Off Switch and V-Groove
  • Magnetic force on all 6 sides
  • Holds pipe, angle, tube, and plate
  • Precision machined surfaces 
$408.83

  • Rated Input Current: 20A
  • Power Factor: 0.8
  • Insulation Class: F
  • Enclosure Protection: IP21S
MSRP: $1,621.72
$1,369.50
As low as $44.50/mo

  • Table Capacity 1100lbs
  • Variable Speed
  • 19.5" Turn Table 
  • 135 Degree of Tilt 
MSRP: $8,405.86
$6,841
As low as $222.33/mo

  • 110V
  • Table Capacity 484lbs
  • Foot Pedal Operated 
  • 13" Turn Table 
MSRP: $3,581.26
$2,914
As low as $94.70/mo

  • Magnetic holding device that is adjustable from 45 degree to 90 degree. Built in scale. Can function as a “third hand” so Weldor can work alone. Magnet has approximately 100 lbs of holding force. NOT FOR LIFTING!
$570.77
As low as $18.55/mo

  • Table capacity 770Ibs
  • 13" turn table
  • Easy to use manual tilt
  • 110V, 1PH
MSRP: $4,662.45
$3,794
As low as $123.30/mo

  • Efficiency: 85%
  • Power Factor: 0.75
  • Insulation Class: H
  • Enclosure Protection: IP21S

  • Voltage: 18V DC, 4.0 Ah
  • Power: 25 Watts 
  • Welding position: 2F & 3F
  • Torch diameter range: 5/8” – 7/8”
$4,175
As low as $135.68/mo

  • Magnetic holding device with fixed 90 degree Inside Corner. Clamp and align in one step.
  • Can function as “third hand” so Welder can work alone.
$459.78

  • All Steel Construction
  • .600 Top Plates with 5/8" holes space at 2" apart
  • Adjustable Leveling Pads
  • Weight Holding Capacity 2600 Lbs.
$3,145
As low as $102.21/mo

  • Fixed 90° Outside Corner
  • Functions as a “third hand”
  • Body type: aluminum
  • Holding force: 100 lbs (not for lifting) 
$453.75