By Category

Milling Machines

  • Layout
OZ Machine 230V 1.5HP Copy Router Machine (3 Motors) GALAXY - IV at Elite Metal Tools
OZ Machine 230V 1.5HP Copy Router Machine (3 Motors) GALAXY - IV
  • KW: 1.1
  • RPM: 12000
  • Hz: 200
  • Air consumption: 9 L / min
$14,500
As low as $471.25/mo
View Details
Jet JTM-4VS Mill With 2-Axis ACU-RITE G-2 MILLPWR CNC 690938 at Elite Metal Tools
Jet JTM-4VS Mill With 2-Axis ACU-RITE G-2 MILLPWR CNC 690938
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • Estimated run time feature
MSRP: $46,229.91
$37,629
As low as $744.67/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Power Draw Bar 690430 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Power Draw Bar 690430
  • Adjustable gibs throughout
  • Heavy-duty spindle brake
  • Heavy-duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
MSRP: $26,995.71
$21,879
As low as $432.98/mo
View Details
Acra LC25 VH Vertical and Horizontal Milling Machine AMVHLC25VH at Elite Metal Tools
Acra LC25 VH Vertical and Horizontal Milling Machine AMVHLC25VH
  • Table Size: 10” X 56”
  • X, Y, Z Axis Travel: 36” X 16 ½” X 5” 
  • Vertical/Horizontal Spindle: #40 NST
  • Voltage: 220 / 440V/ 3PH
$41,214.80
As low as $815.64/mo
View Details
Jet JMD-18 Mill/Drill With ACU-RITE 203 DRO 350401 at Elite Metal Tools
Jet JMD-18 Mill/Drill With ACU-RITE 203 DRO 350401
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $7,721.26
$6,319
As low as $205.36/mo
View Details
Jet JTM-949EVS Mill With X-Axis Powerfeed and Air Powered Draw Bar 690502 at Elite Metal Tools
Jet JTM-949EVS Mill With X-Axis Powerfeed and Air Powered Draw Bar 690502
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $24,478.57
$19,859
As low as $393.00/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE G-2 MILLPWR CNC With Air Powered Draw Bar 690949 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE G-2 MILLPWR CNC With Air Powered Draw Bar 690949
MSRP: $57,820.18
$47,062.99
As low as $931.37/mo
View Details
Acra Variable Speed Vertical Mill LCM-42 at Elite Metal Tools
Acra Variable Speed Vertical Mill LCM-42
  • Table Size: 9” X 42” 
  • X, Y, Z Axis Travel: 30” X 12” X 23”
  • Motor: 3 H.P.
  • Spindle Nose: R-8
$12,885.40
As low as $418.77/mo
View Details
Knuth 14.8HP 1.18" BO 90 CNC Drill Press/Milling Center 180027 at Elite Metal Tools
Knuth 14.8HP 1.18" BO 90 CNC Drill Press/Milling Center 180027
  • Drilling capacity: 1.18”
  • Table load capacity: 2,200 lbs.
  • Number of T-slots: 6 positions
  • T-slots, width: 0.7”
MSRP: $166,375
$162,207.22
As low as $3,210.08/mo
View Details
Jet JTM-1050EVS2/230 Electronic Variable Speed Vertical Milling Machine 230V 3Ph 691600 at Elite Metal Tools
Jet JTM-1050EVS2/230 Electronic Variable Speed Vertical Milling Machine 230V 3Ph 691600
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $22,004.91
$17,999
As low as $356.20/mo
View Details
Knuth 3HP 44"x10" UWF 1.1 Vertical Universal Milling Machine 362693 at Elite Metal Tools
Knuth 3HP 44"x10" UWF 1.1 Vertical Universal Milling Machine 362693
  • Table set up area: 44” x 10”
  • Number of T-slots: 3 positions
  • Table load capacity (max.): 550 lbs.
  • X-axis travel: 24”
$26,548.89
As low as $525.40/mo
View Details
Sharp Industries 220V 9” x 49” Digital Variable Speed 3 Axes CNC Vertical Knee Mill LMV-49/MP-3 G2 at Elite Metal Tools
Sharp Industries 220V 9” x 49” Digital Variable Speed 3 Axes CNC Vertical Knee Mill LMV-49/MP-3 G2
  • Table Size: 9” x 49”
  • X, Y, Z Axis Travel: 31”, 11”, 5”
  • Spindle: 60 - 4500 rpm Digital Variable Speed
  • Motor: 220V, 3 HP
$47,690
As low as $943.78/mo
View Details
Jet JTM-4VS Variable Speed Vertical Milling Machine 230/460V 3Ph 690182 at Elite Metal Tools
Jet JTM-4VS Variable Speed Vertical Milling Machine 230/460V 3Ph 690182
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $15,162.86
$12,389
As low as $402.64/mo
View Details
Knuth 10.1HP 83"x20" KB 2100 Bed-Type Milling Machine 301285 at Elite Metal Tools
Knuth 10.1HP 83"x20" KB 2100 Bed-Type Milling Machine 301285
  • Table set up area: 83” x 20”
  • Number of T-slots: 4 positions
  • T-slots, spacing: 0.8”
  • Table load capacity (max.): 4,400 lbs.
$137,166.02
As low as $2,714.51/mo
View Details
Palmgren 14” Variable Speed Gear Head Milling Machine 9680164 at Elite Metal Tools
Palmgren 14” Variable Speed Gear Head Milling Machine 9680164
  • Motor: 1.20HP / 115V / 1PH
  • Drilling Capacity max.: Ø 16 mm / 5/8 in
  • Gear Stages: 2 stages, continuously variable
  • Head Travel: 280 mm / 11.024 in
MSRP: $2,933
$2,749.69
As low as $89.36/mo
View Details
Sharp Industries 220V 67” Heavy Duty Vertical Bed Type Mill KMA-1 at Elite Metal Tools
Sharp Industries 220V 67” Heavy Duty Vertical Bed Type Mill KMA-1
  • Table Size: 14.93” x 67”
  • X & Y Axis Travel: 39.37” x 14.93”
  • Spindle Taper: NST #50
  • Spindle Motor: 220V, 5HP
$67,570
As low as $1,337.21/mo
View Details
Knuth 3HP MF 1 VP Vertical Milling Machine 490006 at Elite Metal Tools
Knuth 3HP MF 1 VP Vertical Milling Machine 490006
  • Table set up area: 49” x 9”
  • Number of T-slots: 3 positions
  • Travel X-axis: 29.9”
  • 5 Year Parts Warranty 
$20,391.39
As low as $403.54/mo
View Details
Knuth 34.9HP 79” x 47” 8,800 lbs. Portalo C 2014 CNC Gantry-Type Milling Machine 170141 at Elite Metal Tools
Knuth 34.9HP 79” x 47” 8,800 lbs. Portalo C 2014 CNC Gantry-Type Milling Machine 170141
  • Spindle Nose-to-Table Surface Distance: 6”-37”
  • Table Dimensions: 79” x 47”
  • Table Load Capacity (max.): 8,800 lbs.
  • Travel X-Axis: 82.7”
$284,495
As low as $5,630.15/mo
View Details
Knuth 12HP Vertical Milling Machine Center X.Mill T 800 SI with Siemens Control 181446 at Elite Metal Tools
Knuth 12HP Vertical Milling Machine Center X.Mill T 800 SI with Siemens Control 181446
  • Motor rating main drive: 12.1 HP
  • Table load capacity: 1,760 lbs
  • Number of T-slots: 5 positions
  • Rapid feed X-, Y-, Z-axis: 1.417 in/min
$111,083.89
As low as $2,198.35/mo
View Details
Jet JMD-18 Mill/Drill With NEWALL DP500 DRO 350133 at Elite Metal Tools
Jet JMD-18 Mill/Drill With NEWALL DP500 DRO 350133
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $7,082.32
$5,779
As low as $187.81/mo
View Details
Knuth 4HP 54"x12" UWF 1.2 Compact Universal Milling Machine with Swiveling Vertical Head 362694 at Elite Metal Tools
Knuth 4HP 54"x12" UWF 1.2 Compact Universal Milling Machine with Swiveling Vertical Head 362694
  • Table set up area: 54” x 12”
  • Number of T-slots: 3 positions
  • Table load capacity (max.): 660 lbs.
  • T-slot (width x spacing): 0.55” x 3.15”
$33,823.89
As low as $669.37/mo
View Details
Jet JTM-1 Step Pulley Milling Machine 230V 3Ph 690082 at Elite Metal Tools
Jet JTM-1 Step Pulley Milling Machine 230V 3Ph 690082
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $14,423.57
$11,399
As low as $370.46/mo
View Details
Sharp Industries 220V 106” Heavy Duty Vertical Bed Type Mill KMA-5 at Elite Metal Tools
Sharp Industries 220V 106” Heavy Duty Vertical Bed Type Mill KMA-5
  • Table Size: 29.5” x 106.3”
  • X & Y Axis Travel: 78.74” x 31.5”
  • Spindle Taper: NST #50
  • Spindle Motor: 220V, 17.5 HP
$160,295
As low as $3,172.23/mo
View Details
Sharp Industries 220V 54” Variable Speed 2 Axes CNC Vertical Knee Mill TMV/MP-2 G2 at Elite Metal Tools
Sharp Industries 220V 54” Variable Speed 2 Axes CNC Vertical Knee Mill TMV/MP-2 G2
  • Table Size: 10” x 54”
  • X, Y, Z Axis Travel: 31”, 15.5”, 5”
  • Spindle: 60 - 4500 rpm  
  • Motor: 220V, 3 HP
$43,900
As low as $868.78/mo
View Details