By Category

Milling Machines

  • Table set up area: 39” x 9”
  • Table load capacity (max.): 330 lbs.
  • Motor rating horizontal spindle: 3 Hp
  • Motor rating vertical spindle: 2 Hp
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
$6,681.43
$5,459.00
  • Motor: 3HP - 230/460V – 3PH
  • Spindle Travel: 5"
  • Range of Spindle Speeds: 60-4200 RPM
  • Overarm Travel: 12-1/4"
$14,425.00
$13,523.44
  • Table Size: 9” x 42”
  • X, Y, Z Axis Travel: 25”, 11”, 5”
  • Spindle: 60 - 4500 rpm
  • Motor: 220V, 3 HP
  • Table Size: 9” x 42”
  • X, Y, Z Axis Travel: 25”, 11”, 5”
  • Spindle: 60 - 4500 rpm
  • Motor: 440V, 3 HP
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
$7,062.86
$5,829.00
  • Table size: 9" x 50"
  • Spindle Nose: R-8
  • Spindle Speeds: 60 - 4,500 RPM
  • Ram Travel: 12
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
$21,158.57
$17,399.00
  • Table Size: 10” x 56”
  • X & Y Axis Travel: 36.2” x 16.3”
  • Spindle Nose Taper: NT-40
  • Spindle Motor: 220V, 5HP
  • Table Size: 10” x 56”
  • X & Y Axis Travel: 36.2” x 16.3”
  • Spindle Nose Taper: NT-40
  • Spindle Motor: 440V, 5HP
  • Motor rating main drive: 12.1 HP
  • Table load capacity: 1,760 lbs
  • Number of T-slots: 5 positions
  • Rapid feed X-, Y-, Z-axis: 1.417 in/min
  • Voltage: 220V Or 440V
  • Cross Travel (Y Axis): 12 1/2"
  • Vertical Knee Travel (Z Axis): 16"
  • Spindle Motor: R-8 or #30 Taper
  • Motor: 1.20HP / 115V / 1PH
  • Drilling Capacity max.: Ø 16 mm / 5/8 in
  • Gear Stages: 2 stages, continuously variable
  • Head Travel: 280 mm / 11.024 in
$3,295.00
$3,089.06
  • Table set up area: 54” x 10”
  • Table load capacity (max.): 770 lbs.
  • Travel X-axis: 31.5”
  • 5 Year Parts Warranty 
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
$24,478.57
$19,859.00
  • KW: 1.1
  • RPM: 12000
  • Hz: 200
  • Air consumption: 9 L / min
  • Table Size: 9” x 42”
  • X, Y, Z Axis Travel: 25”, 11”, 5”
  • Spindle: 60 - 4500 rpm  
  • Motor: 220V, 3 HP
  • Table Size: 9” x 42”
  • X, Y, Z Axis Travel: 25”, 11”, 5”
  • Spindle: 60 - 4500 rpm  
  • Motor: 440V, 3 HP
  • 1PH
  • Fagor DRO
  • Chromed Steel Quill
  • Cross Table Travel: 13"
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
$13,607.14
$10,999.00
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • Estimated run time feature
$59,129.91
$48,129.00
  • Class 7 Spindle, R-8 Spindle, Chromed Quill
  • Certified Meehanite Castings, Turcite B on Female Surfaces, 10″ x 54″ Table
  • Easy to Read Dials, One Shot Lubrication, Dove Tail Ways Table and Knee
  • Square Ways on Saddle, Hardened and Ground Table, Hardened and Ground X and Y Slideways
$15,137.50
$11,883.27
  • Table set up area: 50” x 11”
  • Table load capacity (max.): 330 lbs.
  • Motor rating horizontal spindle: 3 Hp
  • Motor rating vertical spindle: 1.1 Hp - 2 Hp