Lathes

  • Swing Over Bed: 18”
  • Distance Between Centers: 86.6”
  • Spindle Speed: 12-speed geared head 40-2,000 rpm
  • Motor: 440V, 7.5 HP
  • Swing Over Bed: 18”
  • Distance Between Centers: 86.6”
  • Spindle Speed: High: 235-2,000 rpm, Low: 20-170 rpm
  • Motor: 220V, 7.5 HP
  • Motor: 6HP - 230V - 3PH - 60Hz
  • Distance Between Centers: 60"
  • Number of Spindle Speeds: 16
  • Compound Travel: 5-1/2"
$31,327.00
$29,369.06
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$37,740.29
$30,719.00
  • Swing Over Bed: 16 3/16"
  • Swing In Gap: 23"
  • Main Motor: 5 HP
  • Voltage: 220/440V AC / 3 PH
  • Swing Over Bed: 26”
  • Distance Between Centers: 40”
  • Spindle Speed: 12 Speeds (40-1,000 RPM)
  • Motor: 460V, 15 HP
  • Swing Over Bed: 26”
  • Distance Between Centers: 60”
  • Spindle Speed: 12 Speeds (10-1,000 RPM)
  • Motor: 460V, 15 HP
  • Swing Over Bed: 26”
  • Distance Between Centers: 80”
  • Spindle Speed: 12 Speeds (10-1,000 RPM)
  • Motor: 460V, 15 HP
  • Swing Over Bed: 26”
  • Distance Between Centers: 100”
  • Spindle Speed: 12 Speeds (10-1,000 RPM)
  • Motor: 460V, 15 HP
  • Swing Over Bed: 26”
  • Distance Between Centers: 120”
  • Spindle Speed: 12 Speeds (10-1,000 RPM)
  • Motor: 460V, 15 HP
  • Swing Over Bed: 26”
  • Distance Between Centers: 160”
  • Spindle Speed: 12 Speeds (10-1,000 RPM)
  • Motor: 460V, 7.5 HP
  • Spindle Nose Diameter: 2 3/16"
  • Spindle RPM (Variable): 0 ~ 4000 RPM
  • Distance Between Center: 15"
  • Swing Over Bed: 9"
  • Spindle Bore: 2 3/16"
  • Swing In Gap: 24" 
  • Swing Over Bed: 15 1/4"
  • Spindle RPM: 25-2000 (16 Speeds)
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
$34,252.86
$27,799.00
  • Swing Over Bed: 18”
  • Distance Between Centers: 60”
  • Spindle Speed: 12-speed geared head 40-2,000 rpm
  • Motor: 220V, 7.5 HP
  • Swing Over Bed: 18”
  • Distance Between Centers: 60”
  • Spindle Speed: 12-speed geared head 40-2,000 rpm
  • Motor: 440V, 7.5 HP
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
$32,517.14
$26,899.00
  • Swing Over Bed: 18”
  • Distance Between Centers: 60”
  • Spindle Speed: High: 235-2,000 rpm, Low: 20-170 rpm
  • Motor: 220V, 7.5 HP
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
$56,894.29
$46,599.00
  • Standard Equipment
  • 6" 3-Jaw Chuck
  • Threading Dial Indictor
  • Steady & Follow Rest
  • LED Work Lamp
$19,041.43
$15,499.00
  • Swing Over Bed: 26”
  • Distance Between Centers: 40”
  • Spindle Speed: 12 Speeds (40-1,000 RPM)
  • Motor: 230V, 15 HP
  • Swing Over Bed: 26”
  • Distance Between Centers: 60”
  • Spindle Speed: 12 Speeds (10-1,000 RPM)
  • Motor: 230V, 15 HP
  • Swing Over Bed: 26”
  • Distance Between Centers: 80”
  • Spindle Speed: 12 Speeds (10-1,000 RPM)
  • Motor: 230V, 15 HP
  • Swing Over Bed: 26”
  • Distance Between Centers: 100”
  • Spindle Speed: 12 Speeds (10-1,000 RPM)
  • Motor: 230V, 15 HP