Floor Model Lathes

  • Swing Over Bed: 19.7” (500mm)
  • Swing Over Cross-Slide: 11.8” (300mm)
  • Swing Over Gap: 28” (710mm)
  • Gap Length: 9.44” (240mm)
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$26,320.00
$21,299.00
  • 2-Axis Digital Readout
  • 6" Three Jaw Chuck and 8" Four Jack Chuck
  • Face Plate
  • Steady Rest And Follow Rest
$15,591.43
$12,845.00
  • Swing over bed: 14.17"
  • Swing over gap: 20.98"
  • Distance between centers: 40.00"
  • Bed width: 10.25"
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
$23,304.29
$18,799.00
  • Swing In Gap: 30"
  • Spindle RPM: 20-2500 (Variable Speeds) 
  • Main Motor: 5 HP
  • Voltage: 220V AC / 1 PH / 3PH
  • Swing Over Bed: 14 3/16"
  • Spindle Bore: 2 1/16"
  • Main Motor: 5 HP
  • Voltage: 220V AC / 1 PH / 3PH
  • Swing Over Bed: 22"
  • Swing Over Cross Slide 13 3/8"
  • Distance Between Centers 60"
  • Motor 15 HP
  • Swing Over Bed 26"
  • Distance Between Centers 90"
  • Spindle Bore 4 1/8"
  • Cross Feeds 0.0175-0.045"/rev
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
$46,522.86
$38,189.00
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$34,325.71
$27,999.00
  • Swing Over Bed: 16"
  • Swing Over Cross Slide: 10 3/16" 
  • Spindle Bore: 2 1/32" 
  • Main Motor: 7 1/2 HP
  • Turning diameter over bed: 26”
  • Workpiece length (max.): 122”
  • Spindle bore: 3”
  • Speed range: 27 rpm - 2250 rpm
  • Spindle Bore: 1 9/16"
  • Swing In Gap: 18 1/2"
  • Main Motor: 3 HP
  • Voltage 220V AC / 1PH / 3PH
  • Capacity: 18" Swing Over Bend, 60" Between Centers
  • 12-Step Spindle Speed
  • 8"-Three-Jaw Chuck
  • Integrated Coolant System
$38,967.14
$32,099.00
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
$23,531.43
$19,289.00
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
$17,917.14
$14,499.00
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
$25,698.57
$20,859.00
  • Spindle RPM: 36-1800 (12 Speeds)
  • Spindle Bore: 2 1/16"
  • Swing In Gap: 23"
  • Main Motor: 5 HP
  • Swing In Gap: 21"
  • Spindle Bore: 2 1/16"
  • Main Motor: 5 HP
  • Voltage: 220/440V AC / 3 PH
  • Spindle Nose Diameter: 2 3/16"
  • Swing Over Bed: 9"
  • Spindle RPM (Variable): 0 ~ 4000 RPM
  • Tailstock Spindle Travel: 3 3/4"
  • Swing Over Bed 26"
  • Swing Over Cross Slide 17 3/8"
  • Swing In Gap 35 3/8"
  • Distance Between Centers 160"
  • Distance Between Centers 90"
  • Bed Width 15 3/4"
  • Swing Over Bed 22"
  • Spindle Speeds 13-1200 RPM
  • Motor: 2HP - 115/230V - 1PH - 60Hz
  • Distance Between Centers: 36"
  • Spindle Bore: 1-1/2"
  • Number of Spindle Speeds: 18
$12,207.00
$10,528.54