Floor Model Lathes

  • Layout
Jet ETM-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894157 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894157
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,597.07
$35,110
As low as $694.82/mo
View Details
Jet GH-1440-1 Lathe with Acu-Rite 203 DRO, Collet Closer, and Taper Attachment 323377 at Elite Metal Tools
Jet GH-1440-1 Lathe with Acu-Rite 203 DRO, Collet Closer, and Taper Attachment 323377
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $45,948.53
$36,103
As low as $714.47/mo
View Details
Jet E-1440VS With ACU-RITE 303 CSS DRO With Collet Closer 892467 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 303 CSS DRO With Collet Closer 892467
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $37,839.99
$30,145
As low as $596.56/mo
View Details
Jet E-1440VS With ACU-RITE 303 DRO With Collet Closer 892463 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 303 DRO With Collet Closer 892463
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $37,029.07
$29,549
As low as $584.77/mo
View Details
Jet E-1340VS With ACU-RITE 303 CSS DRO With Taper Attachment and Collet Closer 892418 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 CSS DRO With Taper Attachment and Collet Closer 892418
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $40,813.07
$32,329
As low as $639.79/mo
View Details
Jet E-1440VS With ACU-RITE 303 CSS DRO With Taper Attachment 892466 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 303 CSS DRO With Taper Attachment 892466
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $38,380.53
$30,542
As low as $604.42/mo
View Details
Jet E-1340VS With Newall DP700 DRO With Taper Attachment 892420 at Elite Metal Tools
Jet E-1340VS With Newall DP700 DRO With Taper Attachment 892420
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Heavy-duty stand with full length foot brake
MSRP: $36,083.07
$28,854
As low as $571.02/mo
View Details
Jet ETM-949 Mill with 2-Axis Newall DP700 DRO 894151 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis Newall DP700 DRO 894151
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $32,704.53
$26,372
As low as $521.90/mo
View Details
Jet E-1236VS With Newall DP700 DRO With Collet Closer 892321 at Elite Metal Tools
Jet E-1236VS With Newall DP700 DRO With Collet Closer 892321
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $29,055.72
$22,872
As low as $452.63/mo
View Details
Jet E-1236VS With Taper Attachment 892300 at Elite Metal Tools
Jet E-1236VS With Taper Attachment 892300
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $26,487.99
$20,986
As low as $415.31/mo
View Details
Jet E-1340VS With ACU-RITE 303 DRO With Taper Attachment 892412 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 DRO With Taper Attachment 892412
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $36,758.80
$29,351
As low as $580.85/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894362 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894362
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $47,299.99
$38,253
As low as $757.02/mo
View Details
Jet GH-1440-3 with Newall NMS300 DRO, Collet Closer and Taper Attachment 323418 at Elite Metal Tools
Jet GH-1440-3 with Newall NMS300 DRO, Collet Closer and Taper Attachment 323418
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $44,732.26
$35,209
As low as $696.78/mo
View Details
Jet E-1340VS With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892414 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892414
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $39,867.07
$31,634
As low as $626.03/mo
View Details
Jet E-1340VS With Newall DP700 DRO With Taper Attachment and Collet Closer 892422 at Elite Metal Tools
Jet E-1340VS With Newall DP700 DRO With Taper Attachment and Collet Closer 892422
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $39,191.45
$31,138
As low as $616.22/mo
View Details
Jet E-1340VS With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892406 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892406
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $41,488.80
$32,826
As low as $649.62/mo
View Details
Jet E-1440VS With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892456 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892456
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $43,651.07
$34,415
As low as $681.07/mo
View Details
Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894171 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894171
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $45,813.45
$35,999
As low as $712.42/mo
View Details
Jet E-1440VS With ACU-RITE 203 DRO With Collet Closer 892455 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 203 DRO With Collet Closer 892455
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $38,380.53
$30,542
As low as $604.42/mo
View Details
Jet E-1440VS With ACU-RITE 303 CSS DRO With Taper Attachment and Collet Closer 892468 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 303 CSS DRO With Taper Attachment and Collet Closer 892468
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $41,083.45
$32,528
As low as $643.72/mo
View Details
Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894164 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894164
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $46,489.07
$37,657
As low as $745.23/mo
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y, Z-Axis JET Powerfeeds 894135 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y, Z-Axis JET Powerfeeds 894135
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $40,272.53
$31,932
As low as $631.93/mo
View Details
Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO and Servo X, Y-Axis Powerfeeds and USA Air Powered Draw Bar 894226 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO and Servo X, Y-Axis Powerfeeds and USA Air Powered Draw Bar 894226
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $45,272.80
$35,606
As low as $704.64/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894118 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894118
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,286.07
$32,677
As low as $646.67/mo
View Details