Floor Model Lathes

  • Layout
Jet EVS-949 Mill with X, Y, Z-Axis JET Powerfeeds 894307 at Elite Metal Tools
Jet EVS-949 Mill with X, Y, Z-Axis JET Powerfeeds 894307
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,461.72
$30,850
As low as $610.52/mo
View Details
Acra 3200 SET High Speed Precision Engine Lathe 32X200SET at Elite Metal Tools
Acra 3200 SET High Speed Precision Engine Lathe 32X200SET
  • Distance Between Centers 200"
  • Swing Over Bed: 32.67"
  • Swing In Gap: 43.30"
  • Spindle Nose: A2-11
$122,818.30
As low as $2,430.57/mo
View Details
Palmgren 2HP 460V Three Phase 13” x 40” Engine Lathe with 2” Bore 9684550 at Elite Metal Tools
Palmgren 2HP 460V Three Phase 13” x 40” Engine Lathe with 2” Bore 9684550
  • Spindle Taper: MT 6
  • Number of Spindle Speeds: 8
  • Spindle Speed: 70 - 2000 RPM
  • Spindle Seat: Camlock D1-5
MSRP: $14,834
$13,088.60
As low as $425.37/mo
View Details
Jet EVS-949 Mill with Z-Axis JET Powerfeed 894302 at Elite Metal Tools
Jet EVS-949 Mill with Z-Axis JET Powerfeed 894302
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $35,812.80
$28,210
As low as $558.27/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894325 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894325
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $46,286.45
$36,925
As low as $730.74/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894332 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894332
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $45,272.80
$35,053
As low as $693.69/mo
View Details
Jet ETM-949 Mill with Z-Axis JET Powerfeed 894102 at Elite Metal Tools
Jet ETM-949 Mill with Z-Axis JET Powerfeed 894102
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $32,569.45
$25,864
As low as $511.84/mo
View Details
Knuth 29.5HP 59” DL E Heavy 500/1500 Universal Heavy-Duty Lathe 300499 at Elite Metal Tools
Knuth 29.5HP 59” DL E Heavy 500/1500 Universal Heavy-Duty Lathe 300499
  • Workpiece length (max.): 59”
  • Workpiece weight (max.): 13,200 lbs.
  • Turning diameter over bed: 39”
  • Turning-Ø over support: 26”
$142,995
As low as $2,829.87/mo
View Details
Knuth 29.5HP 118” DL E Heavy 620/3000 Universal Heavy-Duty Lathe 300506 at Elite Metal Tools
Knuth 29.5HP 118” DL E Heavy 620/3000 Universal Heavy-Duty Lathe 300506
  • Workpiece length (max.): 118”
  • Workpiece weight (max.): 13,200 lbs.
  • Turning diameter over bed: 49”
  • Turning-Ø over support: 35”
$167,995
As low as $3,324.62/mo
View Details
Acra 3200 SET High Speed Precision Engine Lathe 32X60SET at Elite Metal Tools
Acra 3200 SET High Speed Precision Engine Lathe 32X60SET
  • Distance Between Centers 60"
  • Swing Over Bed: 32.67"
  • Swing Over Cross Slide: 23.62"
  • Swing In Gap: 43.30"
$77,986.70
As low as $1,543.35/mo
View Details
Acra 2800 SET High Speed Precision Engine Lathe 28X200SET at Elite Metal Tools
Acra 2800 SET High Speed Precision Engine Lathe 28X200SET
  • Distance Between Centers 200"
  • Spindle Bore: 6.02"
  • Swing Over Cross Slide: 19.68"
  • Swing In Gap: 39.37"
$120,861.40
As low as $2,391.84/mo
View Details
Knuth 20.1HP 59” DL S 425/1500 Universal Heavy-Duty Lathe 301510 at Elite Metal Tools
Knuth 20.1HP 59” DL S 425/1500 Universal Heavy-Duty Lathe 301510
  • Workpiece length (max.): 59”
  • Workpiece weight (max.): 8,800 lbs.
  • Turning diameter over bed: 33”
  • Turning-Ø over support: 20”
$97,495
As low as $1,929.42/mo
View Details
Knuth 29.5HP 197” DL E Heavy 500/5000 Universal Heavy-Duty Lathe 300502 at Elite Metal Tools
Knuth 29.5HP 197” DL E Heavy 500/5000 Universal Heavy-Duty Lathe 300502
  • Workpiece length (max.): 197”
  • Workpiece weight (max.): 13,200 lbs.
  • Turning diameter over bed: 39”
  • Turning-Ø over support: 26”
$174,495
As low as $3,453.25/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894367 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894367
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $45,543.07
$35,248
As low as $697.55/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894348 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894348
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $49,462.26
$39,222
As low as $776.20/mo
View Details
Knuth 24.8HP 59” DL S 515/1500 Universal Heavy-Duty Lathe 301514 at Elite Metal Tools
Knuth 24.8HP 59” DL S 515/1500 Universal Heavy-Duty Lathe 301514
  • Workpiece length (max.): 59”
  • Workpiece weight (max.): 8,800 lbs.
  • Turning diameter over bed: 39”
  • Turning-Ø over support: 28”
$104,495
As low as $2,067.95/mo
View Details
Jet EGH-1740 With Newall DP700 DRO With Collet Closer 892513 at Elite Metal Tools
Jet EGH-1740 With Newall DP700 DRO With Collet Closer 892513
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $61,354.80
$47,824
As low as $946.43/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Taper Attachment, 3HP 311441 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Taper Attachment, 3HP 311441
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $27,569.07
$21,440
As low as $424.29/mo
View Details
Jet ETM-949EVS Mill With 2-Axis ACU-RITE MILLPWR G2 CNC 894090 at Elite Metal Tools
Jet ETM-949EVS Mill With 2-Axis ACU-RITE MILLPWR G2 CNC 894090
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $75,544.80
$58,089
As low as $1,149.58/mo
View Details
Palmgren 10HP 460V Three Phase 22” x 80” Engine Lathe 9684556 at Elite Metal Tools
Palmgren 10HP 460V Three Phase 22” x 80” Engine Lathe 9684556
  • Swing Over Bed: 22"
  • Distance Between Centers: 80"
  • Spindle Taper: MT7
  • Spindle Bore: 4-1/8"
MSRP: $48,334
$42,647.42
As low as $843.99/mo
View Details
Jet GH-1440-1 Lathe with Newall NMS300 DRO and Taper Attachment 323388 at Elite Metal Tools
Jet GH-1440-1 Lathe with Newall NMS300 DRO and Taper Attachment 323388
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $37,434.53
$29,383
As low as $581.48/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X-Axis JET Powerfeed 894338 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X-Axis JET Powerfeed 894338
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,056.53
$34,173
As low as $676.28/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894350 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894350
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $51,219.07
$40,493
As low as $801.35/mo
View Details
Jet GH-1440-1 Lathe with Taper Attachment and Collet Closer 323373 at Elite Metal Tools
Jet GH-1440-1 Lathe with Taper Attachment and Collet Closer 323373
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $39,867.07
$31,140
As low as $616.26/mo
View Details