Floor Model Lathes

  • Spindle RPM (Variable): 0~4000 RPM
  • Swing Over Bed: 9"
  • Spindle Nose: 5C (10º) / 4º x Taper
  • Voltage: 230V AC/ 1PH / 3PH
$13,193.40
As low as $428.78/mo
On Sale
Jet GH-1440-1 Geared Head Lathe 322830 at Elite Metal Tools
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $25,406.80
Was: $19,878
Now: $13,914.60
As low as $275.36/mo
  • Swing Over Bed: 16"
  • Swing Over Cross Slide: 10 3/16" 
  • Spindle Bore: 2 1/32" 
  • Main Motor: 7 1/2 HP
$16,633.10
As low as $329.16/mo
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $28,785.45
$22,295
As low as $441.21/mo
  • Center height: 8”
  • Turning diameter over bed: 15”
  • Turning-Ø over support: 10”
  • Gap bridge length: 10”
$28,595
As low as $565.89/mo
  • Turning diameter over bed: 13”
  • Center width: 39.37”
  • Spindle speed: 70 rpm - 2000 rpm
  • 5 Year Parts Warranty 
$13,195
As low as $428.83/mo
  • Swing Over Bed: 16.14"
  • Distance Between Centers: 35.82"
  • Main Spindle Motor: 7.5 HP ( 10 HP Opt.)
  • (#) Range of Spindle Speed: Inf. Variable 40~5000 RPM
$54,209.10
As low as $1,072.79/mo
On Sale
Powermatic 2020B Lathe, 2HP, 1 or 3PH, 220V 1792020 at Elite Metal Tools
  • Brass-tipped knockout bar concentrates the action in the sliding handle; the brass tip will not damage drive centers
  • Digital RPM readout for accurate speed adjustments
  • Redesigned tool rest geometry allows for better chisel movement along the tool rest
  • Set of dead centers which hold a spindle for visual comparison
  • Sliding headstock with electronic variable speed
MSRP: $7,297.72
Was: $5,939
Now: $5,107.54
As low as $165.99/mo
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $69,598.53
$53,787
As low as $1,064.44/mo
  • Swing over Bed: 14″
  • Distance between centers: 40″
  • Diameter of Lead Screw: 7/8″
  • Range of spindle speeds: 45 – 1800 RPMS
MSRP: $15,300
$13,575
As low as $441.18/mo
  • Swing Over Bed: 18”
  • Distance Between Centers: 60”
  • Spindle Speed: 12-speed geared head 40-2,000 rpm
  • Motor: 220V, 7.5 HP
$40,512.83
As low as $801.74/mo
  • Swing Over Bed: 18”
  • Distance Between Centers: 60”
  • Spindle Speed: 12-speed geared head 40-2,000 rpm
  • Motor: 440V, 7.5 HP
$40,512.83
As low as $801.74/mo
  • Swing Over Bed: 18”
  • Distance Between Centers: 60”
  • Spindle Speed: High: 235-2,000 rpm, Low: 20-170 rpm
  • Motor: 220V, 7.5 HP
$42,876.63
As low as $848.52/mo
  • Capacity: 18" Swing Over Bend, 60" Between Centers
  • 12-Step Spindle Speed
  • 8"-Three-Jaw Chuck
  • Integrated Coolant System
MSRP: $48,651.45
$39,199
As low as $775.74/mo
  • Turning diameter over bed: 12”
  • Bed width: 7”
  • Center width: 31.89”
  • 5 Year Parts Warranty 
$11,895
As low as $386.58/mo
  • Spindle Bore: 1 9/16"
  • Swing In Gap: 18 1/2"
  • Main Motor: 3 HP
  • Voltage 220V AC / 1PH / 3PH
$15,112.90
As low as $299.08/mo
  • Spindle Nose Diameter: 2 3/16"
  • Swing Over Bed: 11"
  • Cross Slide Power Feed Range: 0.197" ~ 4.015"
  • Spindle RPM (Variable): 50 ~ 4000 RPM
$36,680.60
As low as $725.90/mo
On Sale
Jet ETM-949EVS, Elite 9x49 Electronic Variable Speed Mill 230V, 3Ph 894050 at Elite Metal Tools
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $33,785.72
Was: $26,744
Now: $18,720.80
As low as $370.48/mo
  • Spindle Bore: 3.18”
  • Swing Over Bed: 16”
  • Spindle Speed: 12-speed geared head 40-2,000 rpm
  • Motor: 220V, 7.5 HP
$35,823.65
As low as $708.95/mo
  • Capacity: 16" Swing Over Bed, 40" Between Centers
  • 12-Step Spindle Speed
  • 8"-Three-Jaw Chuck
  • Integrated Cooling System
MSRP: $38,853.53
$30,995
As low as $613.39/mo
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $22,771.53
$17,475
As low as $345.83/mo
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $57,841.07
$45,283
As low as $896.15/mo
  • Spindle Bore: 1.56”
  • Swing Over Bed: 13”
  • Spindle Speed: 40 – 2000 RPM
  • Motor: 220V, 3 HP
$26,814.47
As low as $530.65/mo
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $54,597.72
$42,937
As low as $849.72/mo