Floor Model Lathes

  • Heavy Duty main motor 3HP, 220V, 1 phase
  • Spindle bore 1 1/2”
  • 8 spindle speeds from 70-2,000 rpm
  • Heavy Duty guideway width 7 1/2”
$11,950
As low as $388.37/mo
  • Max. swing over bed: 16-1/16"
  • Max. length of workpiece: 60"
  • Max. swing over cross slide: 10 1/4"
  • Main motor: 6 HP, 220V, 3 Phase
$17,850
As low as $353.25/mo
  • Max. swing over bed: 14 7/8"
  • Max. length of workpiece: 40"
  • Max. swing over cross slide: 10 1/16"
  • Main motor: 6 HP, 220V, 3 Phase
$16,350
As low as $323.56/mo
  • Max. swing over bed: 16-1/16"
  • Max. length of workpiece: 40"
  • Max. swing over cross slide: 10 1/4"
  • Main motor: 6 HP, 220V, 3 Phase
$16,850
As low as $333.46/mo
  • Heavy Duty main motor 3HP, 220V, 3 phase
  • Spindle bore 1 1/2”
  • 8 spindle speeds from 70-2,000 rpm
  • Heavy Duty guideway width 7 1/2”
$11,750
As low as $381.87/mo
  • Backlash adjustments provided throughout the carriage
  • Emergency stop within easy reach of the Operator
  • Full Length Splash Guard
  • Power longitudinal feed allows threading and reverse threading
  • Quick change gearbox provides wide range of inch and metric threads
MSRP: $4,125.71
$3,469
As low as $112.74/mo
  • Maintain speeds as low as 15 RPM
  • Adjustable riser blocks for 4 inches of height adjustment, allowing maximum comfort when turning
  • Extended spindle nose increased access to the work piece
  • Fully enclosed VFD for increased user protection
  • Magnetic-backed moveable control box for versatility and safety
MSRP: $6,511.42
$5,299.99
As low as $172.24/mo
  • Backlash adjustments provided throughout the carriage
  • Emergency stop within easy reach of the Operator
  • Full Length Splash Guard
  • Power longitudinal feed allows threading and reverse threading
  • Quick change gearbox provides wide range of inch and metric threads
MSRP: $4,541.43
$3,799
As low as $123.46/mo
  • Integrated digital readout
  • Distance Between Centers: 36"
  • 70 to 1,400 rpm variable speed
  • Input Power: 220V / 1-phase
MSRP: $10,734.29
$8,845
As low as $287.46/mo
  • 15 Amp quad receptacle for easy reach of powered accessories
  • Variable frequency drive allows machine to run on single- or three-phase power
  • Air nozzle with quick connect for clearing dust/chips
  • Brass-tipped knockout bar concentrates the action in the sliding handle; the brass tip will not damage drive centers
  • Includes two 100W task lamps to provide ideal lighting and safety guard.
MSRP: $9,214.27
$7,499.99
As low as $243.74/mo
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings
  • Gearbox gives wide inch threading and feed capabiltites with no gear changes
  • Hardened and ground gears are featured in the headstock and gearbox
MSRP: $11,424.29
$9,299
As low as $302.21/mo
  • Turning diameter over bed: 8”
  • Turning-Ø over support: 4”
  • Travel X-axis: 3.4”
  • Travel Z-axis: 6”
MSRP: $38,705
$37,383.33
As low as $739.81/mo
  • Motor: 2HP - 115/230V - 1PH - 60Hz
  • Distance Between Centers: 36"
  • Spindle Bore: 1-1/2"
  • Number of Spindle Speeds: 18
MSRP: $11,333
$10,624.69
As low as $345.30/mo
  • Spindle Bore: 1 1/4”
  • Swing Over Bed: 11”
  • Spindle Speed: 130 – 4000 RPM
  • Motor: 220V, 5 HP
$41,000
As low as $811.39/mo
  • Spindle Bore: 1.56”
  • Swing Over Bed: 13”
  • Spindle Speed: 40 – 2000 RPM
  • Motor: 220V, 3 HP
$15,285
As low as $302.49/mo
  • Touch Screen DRO 
  • Variable Speed Carriage & Cross Slide 
  • 11" Swing Over Bed 
  • 18" Distance Between Centers 
$37,344
As low as $739.03/mo
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $24,775.71
$20,239
As low as $400.52/mo
  • Turning diameter over bed: 16”
  • Turning diameter over support: 9”
  • Turning diameter without gap bridge: 20”
  • Bed width: 12”
$45,251.67
As low as $895.53/mo
  • Spindle Bore: 1.5”
  • Swing Over Bed: 14”
  • Spindle Speed: 45 – 1800 RPM
  • Motor: 220V, 3 HP
$15,785
As low as $312.38/mo
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $43,598.57
$35,789
As low as $708.26/mo
  • Acme threads on tail stock for smoother operation and longevity
  • Attached tool caddie allows convenient access to centers, wrenches, and accessories
  • Banjo features a non-marring, pinch style clamp for solid tool rest placement
  • Chrome-trimmed hand wheels are ergonomic for a comfortable feel
  • Includes 8 inch tool rest with 1 inch post
MSRP: $2,948.56
$2,399.99
As low as $77.99/mo
  • 2-Axis Digital Readout
  • 6" Three Jaw Chuck and 8" Four Jack Chuck
  • Face Plate
  • Steady Rest And Follow Rest
MSRP: $18,427.14
$14,999
As low as $487.46/mo
  • 6" Three Jaw Chuck
  • 8" Four Jaw Chuck
  • Face Plate
  • Steady and Follow Rest
MSRP: $9,892.86
$8,148
As low as $264.81/mo
  • Swing Over Bed: 16”
  • Distance Between Centers: 60”
  • Spindle Speed: 12-speed geared head 40-2,000 rpm
  • Motor: 220V, 7.5 HP
$27,895
As low as $552.04/mo