Sharp Industries 220V 16” x 60” Swing Precision Lathe with Digital Variable Speed 1660LV

Description

This model is designed with 3.18” spindle hole which is unique for 16” swing lathes. Due to its one-piece casting machine base, it can support heavier cutting on large diameter materials. The large through hole allows most 3” diameter oil pipes to be machined. The variable speed spindle allows easy change of speeds.

Standard Features

• 16″x 60″
• Digital Variable Speed (DVS) 20-2,000 rpm (High, Low)
• D1-8 camlock spindle
• 3.18" spindle bore
• 7.5 hp motor
• Direct selection for inch/metric threads
• One piece cast meehanite bed
• 3 jaw 10" chuck (Bison)
• Face plate (16")
• Steady rest w/ bronze tip (1/2" to 6")
• Follow rest
• Coolant system
• Full length splash guard
• American toolpost
• Halogen work light
• Longitudinal carriage stops
• Tailstock
• Tool kit
• "LV” models wired 220V only. It can run on single phase power. (440V requires additional transformer)

Specifications

• Swing Over Bed: 16”
• Swing Over Cross Slide: 8.75”
• Swing Over Gap: 24.38”
• Gap Width (In Front of Face Plate): 9.75”
• Distance Between Centers: 60”
• Spindle Speed: High: 235-2,000 rpm, Low: 20-170 rpm
• No. of Spindle Speeds: 12
• Spindle Nose: D1-8 camlock
• Spindle Bore: 3.06”
• Threads, Number: 4-56 TPI, 36
• Diametral Pitch Threads, Number: 0.157 – 2.20”, 36
• Longitudinal Feeds: 0.002 – 0.032”/Rev
• Cross Feeds: 0.0001 – 0.0094”/Rev
• Leadscrew Pitch, Diameter: 4 tpi, 1.37’
• Cross Slide Travel: 9.8”
• Compound Travel: 4.9”
• Compound Width: 4.5”
• Bed Length: 77”
• Bed Width: 11.75”
• Quill Diameter: 2.25”
• Quill Travel: 5”
• Quill Center Taper: MT #4
• Spindle Motor: 7.5 HP
• Voltage: 220V
• Phase: 3 Ph
• Power Consumption (220V): 8 KVA / 25 amps
• Power Consumption (440V): 8 KVA / 12.5 amps
• Approximate Weight: 4,100 lbs
• Dimensions: 8.7’ x 2.6’ x 3.9’

Available Options & Accessories

• 440V available with the purchase of an additional transformer
• 3-jaw 12″ chuck
• 4-jaw 12″ chuck
• Chuck guard
• Tool guard (at front of compound slide with limit switch)
• Lead screw cover (full length, accordion style)
• Safety cover at end of spindle
• UL or CSA electrical components, UL spindle motor, CSA pump motor