Floor Model Lathes

  • Layout
Jet GHB-1340A With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 321127 at Elite Metal Tools
Jet GHB-1340A With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 321127
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • Gear box gives wide inch threading and feed capabilities with no gear changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
$22,058.99
$18,229.00
As low as $360/mo
View Details
Jet E-1440VS With Newall DP700 DRO With Taper Attachment and Collet Closer 892472 at Elite Metal Tools
Jet E-1440VS With Newall DP700 DRO With Taper Attachment and Collet Closer 892472
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
$33,988.29
$27,375.78
As low as $541/mo
View Details
Jet EVS-949 Mill with X, Y-Axis JET Powerfeeds 894305 at Elite Metal Tools
Jet EVS-949 Mill with X, Y-Axis JET Powerfeeds 894305
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$32,432.86
$26,399.00
As low as $522/mo
View Details
Jet GH-1440B with ACU-RITE 203 DRO & Taper Attachment 323444 at Elite Metal Tools
Jet GH-1440B with ACU-RITE 203 DRO & Taper Attachment 323444
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Spindle Spider available for ease of turning Gun barrels
$27,250.00
$22,179.00
As low as $438/mo
View Details
Jet EVS-949 Mill with Y-Axis JET Powerfeed 894301 at Elite Metal Tools
Jet EVS-949 Mill with Y-Axis JET Powerfeed 894301
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Spindle utilizes class 7210 (P4, ABEC-7) precision angular bearings for the industry-leading spindle taper runout of 0.00012"
  • The mounted control box houses major mill functions as well as an emergency stop button
$30,712.86
$24,999.00
As low as $494/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894350 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894350
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$43,883.14
$35,719.00
As low as $706/mo
View Details
Jet EVS-949 Mill with X-Axis JET Powerfeed and USA Made Air Draw Bar 894304 at Elite Metal Tools
Jet EVS-949 Mill with X-Axis JET Powerfeed and USA Made Air Draw Bar 894304
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$34,030.00
$27,699.00
As low as $548/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Acu-Rite 203 DRO and Taper Attachment, 3HP 311445 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Acu-Rite 203 DRO and Taper Attachment, 3HP 311445
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
$27,941.99
$22,679.00
As low as $448/mo
View Details
Jet E-1236VS With Newall DP700 DRO 892319 at Elite Metal Tools
Jet E-1236VS With Newall DP700 DRO 892319
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
$21,870.00
$17,659.00
As low as $349/mo
View Details
Jet GHB-1340A With ACU-RITE 203 DRO and Collet Closer 321125 at Elite Metal Tools
Jet GHB-1340A With ACU-RITE 203 DRO and Collet Closer 321125
  • 6" 3-jaw direct mount scroll chuck
  • Compound and cross slide have backlash elimination
  • Gear box gives wide inch threading and feed capabilities with no gear changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
$18,468.99
$14,829.00
As low as $481/mo
View Details
Jet GH-1440B with Newall DP500 & Taper Attachment 323448 at Elite Metal Tools
Jet GH-1440B with Newall DP500 & Taper Attachment 323448
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Spindle Spider available for ease of turning Gun barrels
$21,621.43
$17,599.00
As low as $348/mo
View Details
Jet GH-1440-3 with 203 DRO 323403 at Elite Metal Tools
Jet GH-1440-3 with 203 DRO 323403
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
$24,040.00
$19,699.00
As low as $389/mo
View Details
Jet E-1340VS With Collet Closer 892401 at Elite Metal Tools
Jet E-1340VS With Collet Closer 892401
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
$26,106.35
$21,102.78
As low as $417/mo
View Details
Jet E-1440VS With Collet Closer 892451 at Elite Metal Tools
Jet E-1440VS With Collet Closer 892451
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Heavy-duty stand with full length foot brake
$27,524.29
$22,379.00
As low as $442/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and Servo X, Y, Z-Axis Powerfeeds and USA Air Powered Draw Bar 894416 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and Servo X, Y, Z-Axis Powerfeeds and USA Air Powered Draw Bar 894416
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$46,340.29
$37,719.00
As low as $746/mo
View Details
Jet EVS-949 Mill with X-Axis JET Powerfeed 894300 at Elite Metal Tools
Jet EVS-949 Mill with X-Axis JET Powerfeed 894300
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$30,712.86
$24,999.00
As low as $494/mo
View Details
Jet E-1340VS With Taper Attachment and Collet Closer 892402 at Elite Metal Tools
Jet E-1340VS With Taper Attachment and Collet Closer 892402
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
$29,025.59
$23,377.38
As low as $462/mo
View Details
Jet EVS-949 Mill with X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894306 at Elite Metal Tools
Jet EVS-949 Mill with X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894306
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$35,946.57
$29,259.00
As low as $579/mo
View Details
Jet GH-1440-3 Lathe with Taper Attachment and Collet Closer 323402 at Elite Metal Tools
Jet GH-1440-3 Lathe with Taper Attachment and Collet Closer 323402
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
$29,524.99
$23,899.00
As low as $472/mo
View Details
Jet GH-1440-1 Lathe with Acu-Rite 203 DRO 323374 at Elite Metal Tools
Jet GH-1440-1 Lathe with Acu-Rite 203 DRO 323374
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
$25,483.99
$20,879.00
As low as $413/mo
View Details
Jet BDB-1340A With Newall DP700 DRO 321130 at Elite Metal Tools
Jet BDB-1340A With Newall DP700 DRO 321130
  • 6" 3-jaw direct mount scroll chuck with top reversing jaws
  • Automatic feeding and threading are fully interlocked
  • Carriage mounted spindle control lever
  • Centers and headstock center sleeves
  • Feed selectors travel in grooved ways
$14,495.71
$11,899.00
As low as $386/mo
View Details
Jet E-1340VS With Newall DP700 DRO With Collet Closer 892421 at Elite Metal Tools
Jet E-1340VS With Newall DP700 DRO With Collet Closer 892421
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
$30,265.88
$24,438.18
As low as $483/mo
View Details
Jet GH-1440-1 Lathe with Collet Closer 323372 at Elite Metal Tools
Jet GH-1440-1 Lathe with Collet Closer 323372
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
$23,304.29
$18,799.00
As low as $372/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO and Collet Closer, 3HP 311449 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO and Collet Closer, 3HP 311449
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
$26,360.00
$21,429.00
As low as $424/mo
View Details