Floor Model Lathes

  • Layout
GMC Machinery 15HP 32” x 80” Metal Gap Bed Lathe GML-3280 at Elite Metal Tools
GMC Machinery 15HP 32” x 80” Metal Gap Bed Lathe GML-3280
  • Max. swing over bed: 32”
  • Max. length of workpiece: 80”
  • Max. swing over cross slide: 22-7/16”
  • Max. Swing in gap: 40-1/2”
$37,850.00
As low as $749/mo
View Details
GMC Machinery 15HP 32” x 120” Metal Gap Bed Lathe GML-32120 at Elite Metal Tools
GMC Machinery 15HP 32” x 120” Metal Gap Bed Lathe GML-32120
  • Max. swing over bed: 32”
  • Max. length of workpiece: 120”
  • Max. swing over cross slide: 22-7/16”
  • Max. Swing in gap: 40-1/2”
$39,850.00
As low as $788/mo
View Details
GMC Machinery 10HP 220V 20” x 80” Gap Bed Metal Lathe GML-2080 at Elite Metal Tools
GMC Machinery 10HP 220V 20” x 80” Gap Bed Metal Lathe GML-2080
  • Max. swing over bed: 20"
  • Max. length of workpiece: 80"
  • Max. swing over cross slide: 12-1/2"
  • Max. Swing in gap: 29-1/8”
$23,850.00
As low as $471/mo
View Details
GMC Machinery 10HP 220V 20” x 60” Gap Bed Metal High Speed Lathe GML-2060 at Elite Metal Tools
GMC Machinery 10HP 220V 20” x 60” Gap Bed Metal High Speed Lathe GML-2060
  • Max. swing over bed: 20"
  • Max. length of workpiece: 60"
  • Max. swing over cross slide: 12-1/2"
  • Max. Swing in gap: 29-1/8”
$21,850.00
As low as $432/mo
View Details
Jet E-1440VS, Elite 14x40 EVS Lathe 892030 at Elite Metal Tools
Jet E-1440VS, Elite 14x40 EVS Lathe 892030
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
$24,775.71
$20,239.00
As low as $400/mo
View Details
Jet EGH-1740 With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892506 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892506
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
$59,517.71
$48,629.00
As low as $962/mo
View Details
Jet EGH-1740, Elite 17x40 Large Spindle Bore Geared Head Lathe 892100 at Elite Metal Tools
Jet EGH-1740, Elite 17x40 Large Spindle Bore Geared Head Lathe 892100
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
$43,598.57
$35,789.00
As low as $708/mo
View Details
GMC Machinery 15HP 220V 26” x 160” Precision Gap Bed Metal Lathe GML-26160 at Elite Metal Tools
GMC Machinery 15HP 220V 26” x 160” Precision Gap Bed Metal Lathe GML-26160
  • Max. swing over bed: 26"
  • Max. length of workpiece: 160"
  • Max. swing over cross slide: 17-1/4"
  • Max. Swing in gap: 35-3/8"
$45,850.00
As low as $907/mo
View Details
Jet EGH-1740 With Collet Closer 892501 at Elite Metal Tools
Jet EGH-1740 With Collet Closer 892501
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
$46,828.57
$38,349.00
As low as $758/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y-Axis JET Powerfeeds 894347 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y-Axis JET Powerfeeds 894347
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$39,374.29
$32,049.00
As low as $634/mo
View Details
Jet EGH-1740 With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892510 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892510
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
$57,907.14
$47,269.00
As low as $935/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO 894344 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO 894344
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$35,983.43
$29,289.00
As low as $579/mo
View Details
Jet E-1236VS, Elite 12x36 EVS Lathe 892000 at Elite Metal Tools
Jet E-1236VS, Elite 12x36 EVS Lathe 892000
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
$19,522.86
$15,899.00
As low as $314/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO 894330 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO 894330
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$34,337.14
$27,949.00
As low as $553/mo
View Details
Jet EGH-1740 With ACU-RITE 203 DRO With Taper Attachment 892504 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 203 DRO With Taper Attachment 892504
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
$56,081.26
$45,759.00
As low as $905/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X-Axis JET Powerfeed 894345 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X-Axis JET Powerfeed 894345
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$37,740.29
$30,719.00
As low as $607/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO 894337 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO 894337
  • Patented vari-disc key provides up to 10 times the wear resistance than aluminum or brass keys
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
$35,995.71
$29,299.00
As low as $579/mo
View Details
Jet EVS-1440B Electronic Variable Speed Bench Lathe, 3HP 311440 at Elite Metal Tools
Jet EVS-1440B Electronic Variable Speed Bench Lathe, 3HP 311440
  • Standard Equipment
  • 6" 3-Jaw Chuck
  • Threading Dial Indictor
  • Steady & Follow Rest
  • LED Work Lamp
$19,803.99
$16,099.00
As low as $318/mo
View Details
Jet EGH-1740 With Newall DP700 DRO With Taper Attachment and Collet Closer 892514 at Elite Metal Tools
Jet EGH-1740 With Newall DP700 DRO With Taper Attachment and Collet Closer 892514
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
$59,170.06
$48,459.00
As low as $959/mo
View Details
Jet EGH-1740 With ACU-RITE 203 DRO With Collet Closer 892505 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 203 DRO With Collet Closer 892505
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
$53,045.71
$43,399.00
As low as $858/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO 894323 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO 894323
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$35,221.71
$28,669.00
As low as $567/mo
View Details
Jet EGH-1740 With Taper Attacment 892500 at Elite Metal Tools
Jet EGH-1740 With Taper Attacment 892500
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
$47,717.14
$38,999.00
As low as $771/mo
View Details
Jet EGH-1740 With ACU-RITE 303 DRO 892507 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 303 DRO 892507
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
$50,274.29
$41,199.00
As low as $815/mo
View Details
Jet E-1340VS, Elite 13x40 EVS Lathe 892020 at Elite Metal Tools
Jet E-1340VS, Elite 13x40 EVS Lathe 892020
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
$23,855.91
$19,266.78
As low as $381/mo
View Details