Ironworkers

  • Manual punch aligner
  • 105-ton open throat punch
  • 24” Bar Shear with 4 sided blades
  • Magnetic starter for safety and reliability

  • The Oversize Punch Assembly accommodates punch & die sets in various shapes and sizes from 1" up to 1-9/16"
  • Replaces Standard Punch Assembly or can be used as a secondary Punch Workstation
  • Requires Oversize Punch & Die sets (contact Edwards for pricing and availability)
  • Fits Edwards 25 Ton Ironworkers

  • • Rolling cylinder provides maximum adaptability
  • • Open-sided design allows longer material to pass through the frame
  • • Accepts a variety of standard and custom tooling
  • • Requires an Edwards Ironworker with PowerLink System or a Portable Power Unit to operate (included)
  • •Easy to use Hand/Jog controls with integrated E-Stop
$7,162.86
$5,899
Save $1,263.86!

  • Versatile Attachment that removes anything from a small nibble to a large notch out of Flat Bar or Angle Iron
  • Integrated alignment slots on the safety guarding easily allow for 45° shearing on Angle Iron to speed up your fabrication process
  • Maximum Capacity: 2" x 3" x 5/16"
  • Fits Edwards 25 Ton Ironworkers (Prior to 8/1/17)
  • Easily interchangeable Attachment to maximize your Ironworker's capabilities
$1,518.57
$1,252
Save $266.57!

  • 90° V. Notcher (Punch Station): 6" x 6" x 5/16"
  • 90° V. Notcher (Notcher Station): 3" x 3" x 1/2"
  • Open End Brake: 5" x 5/8"
  • Call For Special Pricing

  • Rectangle Notcher: 2" x 2-1/2" x 3/8"
  • Channel Shear: 2" to 5" Adj.
  • Open End Brake: Flat or Angle Iron Max. 1/4" x 5" 
  • Call For Special Pricing

  • Punching Capacity: 95 ton, 1-3/16" in 1"
  • V-Notch: 3" x 3" x 3/8"
  • Square Tube Shear: 12 gauge, 1/2" to 2" 
  • Call For Special Pricing

  • • Four Workstations: Standard (3) - Punch, Flat Bar Shear & Angle Shear; Open (1) - Factory installed 10" Brake
  • 11 interchangeable Attachments available to tailor the Ironworker to your needs
  • 17 optional Accessories available to increase precision and efficiency
  • PowerLink™ System increases your capabilities by turning your Ironworker into a power source for our ever expanding line of Hydraulic Tools
  • Compact machine that allows for fast and easy transitions between fabrication operations: punch, shear, notch, bend and cope all in one machine
$16,635.71
$13,699
Save $2,936.71!

  • Motor: 220v / 1ph or 3ph
  • Tons: 80
  • Punch: 2" hole in 1/2"
  • Bar Shear: 4" x 4"  1/2"

  • • Four Workstations: Standard (3) - Punch, Flat Bar Shear & Angle Shear; Open (1) - Customize your ironworker with 11 optional Attachments
  • • 11 interchangeable Attachments available to tailor the Ironworker to your needs
  • 16 optional Accessories available to increase precision and efficiency
  • Compact machine that allows for fast and easy transitions between fabrication operations: punch, shear, notch, bend or cope all in one machine.
  • Optimized workstation heights for improved efficiency
$11,291.43
$9,299
Save $1,992.43!

  • • Five Workstations: Standard (5) - Punch, Flat Bar Shear, Angle Shear, Coper Notcher & Rod Shear
  • 10 interchangeable Attachments available to tailor the Ironworker to your needs
  • 16 optional Accessories available to increase precision and efficiency
  • PowerLink™ System increases your capabilities turning your Ironworker into a power source for our ever expanding line of Hydraulic Tools
  • Compact machine that allows for fast and easy transitions between fabrication operations: punch, shear, notch, bend or cope all in one machine
$36,184.29
$29,799
Save $6,385.29!

  • Electronic Strock Control 
  • 220 Volt Single Phase 
  • Quick Release Coupler 
  • 4 Stations 

  • • Four Workstations: Standard (3) - Punch, Flat Bar Shear & Angle Shear; Open (1) - Factory installed Coper Notcher
  • • 14 interchangeable Attachments available to tailor the Ironworker to your needs
  • Available with PowerLink System to increases your capabilities with our ever expanding line of Hydraulic Tools
  • • Compact machine that allows for fast and easy transitions between fabrication operations: punch, shear, notch, bend or cope all in one machine
  • Optimized workstation heights for improved efficiency
$15,238.57
$12,549
Save $2,689.57!

  • Minimize material distortion when working with light gauge material
  • Maintaining constant pressure throughout your Punch cycle, the Urethane Stripper removes your material from the Punch
  • Compatible with all Edwards Ironworkers

  • Speed up production on repeatable bends by providing an adjustable stop for the various size Brake Attachments
  • A positive stop attachment that is fitted to the back of the Ironworker ensures accurate bending
  • Fits all Edwards Ironworkers and Shop Presses

  • Manual punch aligner
  • 80-ton open throat punch
  • 24” Bar Shear with 4 sided blades
  • Magnetic starter for safety and reliability

  • • Rolling cylinder provides maximum adaptability
  • • Open-sided design allows longer material to pass through the frame
  • • Accepts a variety of standard and custom tooling
  • • Requires an Edwards Ironworker with PowerLink System or a Portable Power Unit to operate (included)
  • •Easy to use Hand/Jog controls with integrated E-Stop
$7,162.86
$5,899
Save $1,263.86!

  • • Five Workstations: Standard (5) - Punch, Flat Bar Shear, Angle Shear, Coper Notcher & Rod Shear
  • 10 interchangeable Attachments available to tailor the Ironworker to your needs
  • 16 optional Accessories available to increase precision and efficiency
  • Compact machine that allows for fast and easy transitions between fabrication operations: punch, shear, notch, bend or cope all in one machine.
  • Optimized workstation heights for improved efficiency
$35,455.71
$29,199
Save $6,256.71!

  • Made of durable tool steel for long life
  • Produces round metric holes
  • Compatible with standard Pedestal Die Table
  • Note: Punch diameter must meet or exceed the thickness of your material

  • V-Notch: 3" x 3" x 1/2"
  • Channel Shear: 2" to 6" Adj.
  • Square Tube Shear: 12 ga. 1/2" to 2"
  • Call For Special Pricing

  • 62 Ton 
  • Single Phase 220 Volt 
  • Easy Tooling Setup 
  • Electronic Stroke Control 
$18,295
$16,950
Save $1,345!

  • Dual Cylinder / Dual Operation 
  • 132 Tons 
  • Oversize Tables With Quick Adjust Material Stops 
  • Hydraulic Material Hold Downs at Shear Station 

  • Designed to compliment the Edwards Shop Presses, the 24" Press Brake Tooling turns your Shop Press into a brake
  • Fabricate brackets, frames, pans and tanks with this Brake with 4-Way Die
  • Includes a standard punch that allows 1/16", 1/8", 3/16" and 1/4" material to be formed to a 90° angle
  • Easily create repeatable bends when paired with the Press Brake Back Gauge.
  • Compatible with 40, 60, 110 Ton Shop Presses
$3,145.71
$2,599
Save $546.71!

  • Versatile Attachment that removes anything from a small nibble to a large notch out of Flat Bar or Angle Iron
  • Integrated alignment slots on the safety guarding easily allow for 45° shearing on Angle Iron to speed up your fabrication process
  • Maximum Capacity: 2-1/2" x 4" x 5/16"
  • Fits Edwards 55 Ton Ironworkers
  • Easily interchangeable Attachment to maximize your Ironworker's capabilities
$1,518.57
$1,252
Save $266.57!