An ironworker machine can shear, notch, and punch holes in steel plate and angle iron. An ironworker machine typically has 4 stations where they can shear flat plate, angle iron, round and square bar stock as well as punch plates, angles, i-beam and channel iron.
Ironworkers
- Motor: 110 volt, 1 - 1.5 HP
- Speed: 6-8 strokes per minute (50% faster than the MP4000)
- Capacity: 40 Tons
- Included Foot Pedal
Finance as low as $69.25/month.
- 192 Ton Capacity
- 15 H.P.
- 24-9/16” Throat
- 5 Work Stations
- Motor: 220 / 1ph or 3ph
- Brake: 6" or 9"
- Tonnage: 40
- Punch: 1" hole in 1/2"
- Punching Maximum Capacity: 1.1"x0.79"
- Shearing Flat Bar-Max. thickness: 11.81"x0.79"
- Angle Cutting 45 ° MITRE Cut: 2.76"x0.39"
- Notching Material Thickness: 0.47"
- Punch: Max. Capacity 1-1/16" Dia. in 7/8" A36
- Flat Bar Shear: Max. Capacity 1/2"x14" Max Thickness 3/4"x10"
- Angle Shear: Max. Capacity 5"x5"x3/8"
- Coper/Notcher Standard
- CALL FOR MONTHLY SPECIALS! 281-241-9504
- Punch Throat Depth: 16"
- Angle Shear 45°: 3" x 3" x 1/4"
- Notcher Thickness: 1/2"
- Flat Bar Blade: 23.5"
- Punch: Max. Capacity 1-1/16" Dia. in 5/8" A36
- Flat Bar Shear: Max Capacity 1/2"x12" or 3/8"x14" Max. Thickness 3/4"x4"
- Angle Shear: Max. Capacity 4"x4"x1/4" or 3"x3"x3/8"
- Open Station: Dedicated For Optional Tooling
- CALL FOR MONTHLY SPECIALS! 281-241-9504
- Punch: Max. Capacity 1-1/2" Dia. in 1" A36
- Flat Bar Shear: Max. Width 1/2" x 24" Max. Thickness 1"x12"
- Angle Shear: Max. Size 6"x6"x1/2"
- Coper Notcher: Max. Capacity 2-1/2"x6"x1/2"
- Open Cavity: Dedicated for Optional Tooling
- CALL FOR MONTHLY SPECIALS! 281-241-9504
- Punch: Max. Capacity 1-1/16" Dia. in 1" A36
- Flat Bar Shear: 1/2" x 18" | 3/4" x 14" | 1" x 10"
- Angle Shear: Max. Size 6"x6"x1/2"
- Coper Notcher: Max. Capacity 2-1/2"x6"x1/2"
- Rod Shear: Max. Round 1-1/2" Max. Square 1-1/4"
- CALL FOR MONTHLY SPECIALS! 281-241-9504
Use this "plug-and-play" accessory when production cutting long material to repeatable lengths. The adjustable proximity switch automatically cycles your machine as you guide the material. The48" Auto Cut, compatible with current Edwards Ironworkers, features a rugged solid-steel housing, guarding snoot, 1" x 48" machined back-gauge stock, electrical cording and adjustable, electrical tiebacks. Installs in minutes with simple instructions
Efficiently Work Angle Iron
The Angle Notcher takes a precise 92° notch from the bottom leg of angle up to 3" x 3" x 1/4" profiles. Bend 90° and quick and clean you're on your way to building a steel frame.
Maximum Flexibility for Smaller Ironworkers
Cut solids rods, squares, angles and bar-stock all with ONE tool. The Multi-Shear makes quick work of solid round 1/4", 3/8", 1/2", 5/8", 3/4" rod, and 13/16" square. Also cuts flat bar up to 1/4" x 6" and angle up to 2" x 2" x 1/4".
Shears a variety of rod
The Edwards Rod Shear and Housing is a heavy-duty accessory tool that comes ready to work your 1/4", 3/8", 1/2", 5/8", 3/4" and 1" solid rod.
Set Your Stop
Fitted to the back of the Ironworker, the 48" Back Gaugeaccessory provides an adjustable stop for the Angle Shear andFlat Bar Shear stations of your Edwards Ironworker. The sturdy construction and positive attachment to the machine frame ensures accurate, repeatable cuts for your production jobs.
Work With the Right Angle
A useful tool for anyone, the Edwards Fabricator's Protractorguides your work to the Shear or Punch stations through 180°. Gauged at 15°increments with an additional designation of 22.5°, the protractor features a long leg and a reversible design to accommodate both right and left hand operators.
Easily Minimizes Distortion
By maintaining constant pressure through the punch cycle, theUrethane Stripper minimizes distortion. A must-have when working with light-gauge material.
- Motor: 110 volt, 1 - 1.5 HP
- Speed: 6-8 strokes per minute (50% faster than the MP4000)
- Capacity: 40 Tons
- Included Foot Pedal
- Punching Maximum Capacity: 1.1"x0.79"
- Shearing Flat Bar-Max. thickness: 11.81"x0.79"
- Angle Cutting 45 ° MITRE Cut: 2.76"x0.39"
- Notching Material Thickness: 0.47"
- Punch: Max. Capacity 1-1/16" Dia. in 7/8" A36
- Flat Bar Shear: Max. Capacity 1/2"x14" Max Thickness 3/4"x10"
- Angle Shear: Max. Capacity 5"x5"x3/8"
- Coper/Notcher Standard
- CALL FOR MONTHLY SPECIALS! 281-241-9504
- Punch Throat Depth: 16"
- Angle Shear 45°: 3" x 3" x 1/4"
- Notcher Thickness: 1/2"
- Flat Bar Blade: 23.5"
- Punch: Max. Capacity 1-1/16" Dia. in 5/8" A36
- Flat Bar Shear: Max Capacity 1/2"x12" or 3/8"x14" Max. Thickness 3/4"x4"
- Angle Shear: Max. Capacity 4"x4"x1/4" or 3"x3"x3/8"
- Open Station: Dedicated For Optional Tooling
- CALL FOR MONTHLY SPECIALS! 281-241-9504
- Punch: Max. Capacity 1-1/2" Dia. in 1" A36
- Flat Bar Shear: Max. Width 1/2" x 24" Max. Thickness 1"x12"
- Angle Shear: Max. Size 6"x6"x1/2"
- Coper Notcher: Max. Capacity 2-1/2"x6"x1/2"
- Open Cavity: Dedicated for Optional Tooling
- CALL FOR MONTHLY SPECIALS! 281-241-9504
- Punch: Max. Capacity 1-1/16" Dia. in 1" A36
- Flat Bar Shear: 1/2" x 18" | 3/4" x 14" | 1" x 10"
- Angle Shear: Max. Size 6"x6"x1/2"
- Coper Notcher: Max. Capacity 2-1/2"x6"x1/2"
- Rod Shear: Max. Round 1-1/2" Max. Square 1-1/4"
- CALL FOR MONTHLY SPECIALS! 281-241-9504
Use this "plug-and-play" accessory when production cutting long material to repeatable lengths. The adjustable proximity switch automatically cycles your machine as you guide the material. The48" Auto Cut, compatible with current Edwards Ironworkers, features a rugged solid-steel housing, guarding snoot, 1" x 48" machined back-gauge stock, electrical cording and adjustable, electrical tiebacks. Installs in minutes with simple instructions
Efficiently Work Angle Iron
The Angle Notcher takes a precise 92° notch from the bottom leg of angle up to 3" x 3" x 1/4" profiles. Bend 90° and quick and clean you're on your way to building a steel frame.
Maximum Flexibility for Smaller Ironworkers
Cut solids rods, squares, angles and bar-stock all with ONE tool. The Multi-Shear makes quick work of solid round 1/4", 3/8", 1/2", 5/8", 3/4" rod, and 13/16" square. Also cuts flat bar up to 1/4" x 6" and angle up to 2" x 2" x 1/4".
Shears a variety of rod
The Edwards Rod Shear and Housing is a heavy-duty accessory tool that comes ready to work your 1/4", 3/8", 1/2", 5/8", 3/4" and 1" solid rod.
Set Your Stop
Fitted to the back of the Ironworker, the 48" Back Gaugeaccessory provides an adjustable stop for the Angle Shear andFlat Bar Shear stations of your Edwards Ironworker. The sturdy construction and positive attachment to the machine frame ensures accurate, repeatable cuts for your production jobs.
Work With the Right Angle
A useful tool for anyone, the Edwards Fabricator's Protractorguides your work to the Shear or Punch stations through 180°. Gauged at 15°increments with an additional designation of 22.5°, the protractor features a long leg and a reversible design to accommodate both right and left hand operators.
Easily Minimizes Distortion
By maintaining constant pressure through the punch cycle, theUrethane Stripper minimizes distortion. A must-have when working with light-gauge material.
- ‹ previous
- 4 of 10
- next ›
