Grinding & Sanding

  • Fixed Speed: 4140 RPM
  • 5/8” Arbor Thread
  • Quick wheel change
  • Motor: 3/4 HP 120V Single Phase
$1,208.00
$1,096.63
  • Grinding Belt: 3″ x 79″
  • RPM: 3350
  • Contact Wheel: 8″ x 3″
  • Motor: 0.4 HP
$12,400.00
$11,899.00
  • Variable Speed: 800-8000 SFPM
  • Contact Wheel Size: 7” x 1.5"
  • Throat Clearance: 8-7/8”
  • Motor: 1.5 HP 120V Single Phase
$3,794.00
$3,428.65
  • Grinder 1PH amp draws: 5.9 amps
  • Vacuum 1PH FLA: 5.9 amps
  • SFPM: 5400
  • 3″ and 1.5″ serrated contact wheels on rotating platen
$4,250.00
$4,079.00
  • 2.5 Cubic Feet Capacity
  • Motor: 1-1/2 HP 120V Single Phase
  • Max Length Part: 19”
  • Comes with Process Timer
$7,907.00
$7,221.63
  • Max Grinding Length: 21.7”
  • Max Grinding Width: 8.7”
  • Grinding wheel: 8" x 0.75" x 1.25"            
  • Motor: 220V, 2 HP
  • Max Grinding Length: 21.7”
  • Max Grinding Width: 8.7”
  • Grinding wheel: 8" x 0.75" x 1.25"            
  • Motor: 440V, 2 HP
  • Max Grinding Length: 18.5”
  • Max Grinding Width: 6.3”
  • Grinding wheel: 8" x 0.63" x 1.25"            
  • Motor: 220V, 2 HP
  • Stand Not Included 
  • 3 hp, 3 phase, 220 volt
  • Reversible platen 6 1/2″ x 14″
  • 6″ x 48″ belt, variable position, direct drive, 1 lever quick belt release!!!
$2,395.00
$2,253.00
  • Fixed Speed: 2200 RPM
  • Accepts up to 12" diameter wheels, 2" wide
  • 3/4” Arbor
  • Motor: 1.5 HP 120V Single Phase
$4,162.00
$3,830.90
  • Workpiece weight (max.): 1,100 lbs.
  • Spindle nose-to-table surface distance: 23”
  • Travel X-axis: 35.8”
  • Travel Y-axis: 18”
  • Heavy-duty All Steel 
  • Tilt Table, 45° Down, 15° Up 
  • Optional MG10 Mitre Gauge 
  • 10" Aluminum Disc, 5/8" Arbor 
  • Motor 1.5 hp
  • Power 110V
  • Belt Size L x W 60" x 2"
  • Belt Speed (ft./min.) 800 - 8000 fpm (variable)

 

 

$4,913.06
$3,999.00
  • 4.5 Cubic Feet capacity
  • Motor: 1-1/2 HP 220V Three Phase
  • Max Length Part: 34”
  • Comes with Process Timer
$9,480.00
$8,795.00
  • 3 hp , 1phase, 220 volt
  • Cast Iron work table, 6″ x 10″ w/1/2″ x 1/8″ slot
  • 1/3 hp coolant pump & 10 gal. tank w/ baffles
  • 3450 rpm motor w/ 2800 SFPM at belt
$4,550.00
$4,399.00
  • Nameplate Output- .5
  • Number of Poles- 4
  • Voltage- 230 V or 115V
  • Comes with 36 and 60 grit wheels, cast iron tool rests, and factory connected for 115 volts, and power cord included
$1,424.00
$1,154.54
  • Belt size: 3" x 79"
  • HP: 4
  • Electrics: 220V, 3PH
  • Contact wheel size: 3x8
  • Nameplate Output- 2
  • Number of Poles- 2
  • Voltage- 230 V or 115 V
  • Factory connected for 230, manual starter, specify voltage when ordering
$4,592.00
$3,474.34
  • Compatible with JET models IBG-8SSB and IBG-8VSB bench buffers
  • Heavy duty 14 gauge steel buffer hood housing, 4" exhaust outlet, & 10 gauge mounting plates and brackets
$465.71
$453.00
  • Frequency: 60 Hz
  • Nameplate Output: 0.25/0.06
  • Shaft Diameter/Taper: 0.375”/0.25”
  • Speed: 1725 rpm/3450 rpm
$1,004.00
$775.35
  • 7-1/2HP, 220/440 volt, 3PH motor
  • 8″x60″ belt, replaceable platen, work area 8″ x13″
  • 8″x12″ cast iron table, adjustable angle, 5/8″ slot for mitre gage
  • Dimensions: L25″xW25″xH62″
  • Motor 2 hp
  • Belt Size 48" x 2"
  • Belt Speed (ft./min.) 3,450 fpm
  • Power 110V
$3,030.00
$2,499.00
  • Nameplate Output- .75
  • Number of Poles- 2
  • Voltage- 460 V or 230 V or 208 V
  • Comes with 36 and 60 grit wheels, water pot, tool tray, lighted eye shields, and connected for 208-230 volts no power cord
$2,420.00
$1,939.62