Grinding & Sanding

  • Operate in a horizontal or vertical position
  • 1 HP 120v Motor
  • Comes with MT482 2x48 attachment
  • Quick change belt system
  • Fixed Speed: 6500 SFPM
  • Contact Wheel Size: 7 x 4"
  • Motor: 3 HP 220V Three Phase
  • Includes Magnetic Starter
$4,809.00
$4,283.99
  • Corded electrical delivery
  • Blet Size: 3” x 79”
  • RPMs: 2860
  • Belt Speed: 6630 s/m
$2,450.00
$2,327.50
  • Fixed Speed: 8000 SFPM
  • Contact Wheel Size: 7 x 2.5"
  • Quick belt change
  • Motor: 3 HP 440V Three Phase
$4,306.00
$3,860.11
  • Nameplate Output- .5
  • Number of Poles- 2
  • Voltage- 115 V
  • Supplied with 36 & 60 grit wheels, stamp steel tool rests, and non-exhaust type wheel guards
$1,124.00
$871.13
  • 8.5 Cubic Feet capacity
  • Motor: 3 HP 220V Three Phase
  • Max Length Part: 36”
  • Comes with Process Timer
$15,896.00
$14,233.71
  • Fixed Speed: 1725 RPM
  • Comes with Magnetic Starter
  • Forward / Reversing switch
  • Motor: 3 HP 220V Three Phase
$10,776.00
$9,755.06
  • 4″ x 36″ wet benchtop belt sander
  • 1/2 hp, 110 vac, TEFC motor
  • self contained coolant tank & pump
  • Dimensions: L20″ x W 20″ x H 12″
$2,925.00
$2,758.00
  • Motor: 1/3 HP
  • Belt Size: 2 x 42 or 1 x 42 in
  • Disc Table Size: 5-1/2 x 8-1/4 in
  • Belt Table Size: 6-3/4 x 9 in
$350.00
  • Fixed Speed: 8000 SFPM
  • Contact Wheel Size: 7 x 2.5"
  • Quick belt change
  • Motor: 3 HP 220V Three Phase
$4,306.00
$3,860.11
  • 3 Phase 220/440 volt
  • Cast iron table with 1/2″ x 1/8″ slot, cast iron frame, Heavy duty base
  • Steel platen – 6-1/2″ x 17″, 2800 SFPM
  • Constant spring belt tension, FAST 1 lever belt change
$4,650.00
$4,492.00
  • Free standing tilting-head pedestal
  • Metalworking belt and disc starter kit
  • Quick change belt system
  • Operate in a horizontal or vertical position
  • Wheel Center Height: 5.5"
  • Wheel Guard: 6"
  • Wheel Speed: 600-5000 RPM
  • Shaft: Dual
  • Shaft Diameter: 0.75”
  • Speed: 3000 rpm/3600 rpm
  • Wheel Diameter: 6”
  • Wheel Bore Size: 1.25”
$2,928.00
$2,298.57
  • Shaft Diameter: 5/8"
  • Dust Collection: Integrated dust chute
  • Grit: 36 & 60
  • Wheel Size: 8" x 1" x 5/8" - Aluminum Oxide
  • 99% efficient at 5 Microns
  • Replacement filters for JDC-501 (pair)
  • Specifically designed for Metalworking dust collection
$512.86
$487.00
  • Variable Speed: 550-5500 SFPM
  • Contact Wheel Size: 1” x 2"
  • Air Tension Quick Change Assembly
  • Motor: 1.5 HP 120V Single Phase
$6,088.00
$5,361.80
  • Nameplate Output- 5
  • Number of Poles- 6
  • Voltage- 460 V or 230 V or 208 V
  • Factory connected for 230, magnetic starter must be changed for other voltages
$6,337.00
$4,797.46
  • Grinding Belt: 3″ x 79″
  • RPM: 3350
  • Contact Wheel: 8″ x 3″
  • Motor: 0.4 HP
  • Grinding Belt: 3″ x 79″
  • RPM: 3350
  • Contact Wheel: 8″ x 3″
  • Motor: 0.4 HP
  • 10″x90″ belt, 3400 SFPM
  • 10HP, 3phase, TEFC motor. Magnetic controls with jog switch
  • Table Tilt 45 deg. down, 15 deg. up
  • Dimensions: L46″ x W30″ x H35″
  • Table Size: 16” x 32”
  • Grinding wheel: 14" x 1.5" x 5"  
  • Spindle Speed: 1,720 rpm
  • Motor: 220V, 5 HP
  • Nameplate Output- .75
  • Number of Poles- 2
  • Voltage- 230 V or 115 V
  • Comes with 36 and 60 grit wheels, water pot, tool tray, lighted eyeshields, and connected for 115 volts power cord included
$2,459.00
$1,967.18
  • Nameplate Output- .75
  • Number of Poles- 4
  • Voltage- 460 V or 230 V  or 208 V
  • Comes with 36 and 60 grit wheels, and connected for 208-230 volts no power cord
$2,087.00
$1,636.19