Belt & Disc

  • Fixed Speed: 8000 SFPM
  • Contact Wheel Size: 7” x 2"
  • Throat Clearance: 8-7/8”
  • Motor: 1.5 HP 120V Single Phase
MSRP: $3,032
$2,792.13
As low as $90.74/mo

  • Mount to your bench, fixture
  • One knob tracking, sanding belt is spring tensioned
  • V belt drive
  • Wt: 115 lbs
MSRP: $1,190
$1,150
As low as $37.37/mo

  • 2HP Motor 
  • Disc Diameter 20"
  • Disc Speed 1100rpm
  • 220V/1-phase Power 
MSRP: $2,964
$2,449
As low as $79.59/mo

  • Nameplate Output- 7.5
  • Number of Poles- 4
  • Voltage- 460 V or 230 V or 208 V
  • Factory connected for 230, magnetic starter must be changed for other voltages
MSRP: $8,646
$6,960.44
As low as $226.21/mo

  • Variable Speed: 500-5300 SFPM
  • Contact Wheel Size: 7 x 4"
  • Pedestal Included
  • Motor: 1 HP 120V Single Phase
MSRP: $6,698
$5,939.89
As low as $193.04/mo

  • IN STOCK READY TO SHIP!!!
  • Tilt table- vertical sander only
  • 1" x 42" belt
  • 4" drive wheel
  • 1800 SFPM

 

 


  • Reduced Grinding Time
  • Dependable and Safe
  • Low Noise Level
  • Motor: 1 HP Special Duty, 3450 rpm, 60 Hz, 220 Volt
$2,395
As low as $77.83/mo

  • 9" aluminum disc reduces heat buildup and prolongs abrasive life
  • Cast iron work rests with tool-less adjustments
  • Contact wheel grinding with toolless access
  • Easy-to-use belt tracking.
  • Full guarding of all non-work contact points
MSRP: $1,276.23
$1,099
As low as $35.71/mo

  • Wheel Center Height: 5.5"
  • Wheel Guard: 6"
  • Wheel Speed: 600-5000 RPM
  • Shaft: Single
$1,679
As low as $54.56/mo

  • Contact Wheel Size: 7" x 2"
  • Fixed Speed: 8000 SFPM
  • Adjustable Work Rest Included
  • Motor: 1 HP, 120V Single Phase
MSRP: $2,118
$1,937.08
As low as $62.95/mo

  • This model includes the vacuum base dust collector
  • Quick change belt, pre-tensioned one lever belt change
  • 100% Made in USA!
  • Multi-position horizontal/vertical
$3,434
As low as $111.60/mo

  • Variable Speed: 550-5500 SFPM
  • Contact Wheel Size: 1” x 2"
  • Manual Spring Tension Quick Change Assembly
  • Motor: 1.5 HP 120V Single Phase
MSRP: $4,528
$4,052.81
As low as $131.71/mo

  • Nameplate Output- 3
  • Number of Poles- 4
  • Voltage- 460 V or 230 V or 208 V
  • Factory connected for 230, manual starter, specify voltage when ordering
MSRP: $6,397
$5,081.85
As low as $165.16/mo

  • Fixed Speed: 6000 SFPM
  • Contact Wheel Size: 5” x 2"
  • Throat Clearance: 7-1/2”
  • Motor: 1 HP 120V Single Phase
MSRP: $2,723
$2,531.74
As low as $82.28/mo

  • Adjustable safety shields
  • Adjustable Tool Rest
  • CSA/CUS Certified
  • Fine and coarse vitrified grinding wheels
  • Heavy duty capacitor motor
MSRP: $2,085.71
$1,719
As low as $55.86/mo

  • Fixed Speed: 8000 SFPM
  • Contact Wheel Size: 7” x 1.5"
  • Throat Clearance: 8-7/8”
  • Motor: 1.5 HP 120V Single Phase
MSRP: $2,991
$2,757.58
As low as $89.62/mo

  • Table Adjustments Downward 45°
  • Table Adjustments Upward 30°
  • Disc Diameter 20"
  • Disc Speed 1,100 rpm
MSRP: $3,607.31
$2,969
As low as $96.49/mo

  • 9" aluminum disc reduces heat buildup and prolongs abrasive life
  • Cast iron work rests with tool-less adjustments
  • Contact wheel grinding with toolless access
  • Easy-to-use belt tracking.
  • Full guarding of all non-work contact points
MSRP: $1,124.69
$960
As low as $31.20/mo

  • Fixed Speed: 6500 SFPM
  • Contact Wheel Size: 7 x 4"
  • Quick belt change
  • Motor: 2 HP 220V Single Phase
MSRP: $4,276
$3,840.45
As low as $124.81/mo

  • Extra large tilting table
  • Extra large tilting table lowers completely below disc for use of the entire disc surface
  • Low voltage protection switch
  • Precision table raiser utilizes a rack and gear mechanism for effortless operation
  • Rigid column and heavy duty base
MSRP: $4,439.31
$3,619
As low as $117.61/mo

  • Variable Speed: 250-2500 SFPM
  • Accepts up to 10" diameter wheels, 2" wide
  • 3/4” Arbor
  • Motor: 1.5 HP 120V Single Phase
MSRP: $4,211
$3,785.67
As low as $123.03/mo

  • Adjustable Dust port with high dust collection efficiency and drive sparks away from the Operator
  • Aluminum casted drive wheel for years of use
  • Flat and Angular Stock: Platen setting is the perfect angle for high speed, precision flat and level grinding
  • Fully guarded on all grinding surfaces
  • Steel frame and platen provides heavy duty construction
MSRP: $2,550.49
$2,079
As low as $67.56/mo

  • All-purpose- for wood, metal and plastics
  • Vertical or Horizontal position, 4″ x6″ cast iron platen
  • pre-set spring belt tension
  • Dimensions: W18″ x H17″ x D 7″
MSRP: $825
$779
As low as $25.31/mo

  • Fixed Speed: 5000 SFPM
  • Contact Wheel Size: 7 x 4"
  • Pedestal Included
  • Motor: 1 HP 120V Single Phase
MSRP: $6,160
$5,455.62
As low as $177.30/mo