Drill Presses

  • 1/2" diameter external positive depth stop with three nut locking feature for quick adjustment
  • Adjustable tension spindle return spring
  • Drill chuck and key attach to the side of the drill press always within reach of the operator
  • Hinged metal belt and pulley cover
  • Large Hand Grips designed with the users comfort in mind
$3,181.43
$2,599.00
  • Casted head for more accuracy and rigidity
  • Emergency stop allows for immediate shut off
  • Forward and reverse switch for instant tapping mode
  • Front Mounted LED Spindle RPM Readout
  • Heavy casted column prevents failures prolonging the life of the machine
$5,447.14
$4,399.00
  • Drilling capacity in steel: up to 1.57" (40mm) maximum
  • Drilling capacity in cast iron: up to 1.77" (45mm) maximum
  • Depth scale and adjustable depth stop
  • Built-in low voltage electrical equipment in machine head
  • CSA/CUS Certified
  • Front Mounted LED Spindle RPM Readout
  • Front mounted positive control depth stop
  • Head is massively constructed for more accuracy and rigidity & heavy duty cast iron design
  • Drill Chuck not included
$6,510.00
$5,299.00
  • 1/2" Drill chuck and arbor included
  • 3" column diameter for maximum head support
  • 6" stroke for deep hole application
  • Full bearing support on quill for maximum spindle stiffness
  • Handwheel speed adjustment of 400 to 5,000 RPM
$3,071.43
$2,529.00
  • Coolant system is optional #5512104
  • CSA/CUS Certified
  • Front Mounted LED Spindle RPM Readout
  • Front mounted positive control depth stop
  • Heavy-duty steel column for increased precision and rigidity
$7,352.86
$5,959.00
  • Drilling capacity in steel: up to 1.57" (40mm) maximum
  • Drilling capacity in cast iron: up to 1.77" (45mm) maximum
  • Machine base with 2 T-slots, coolant tank and pump
  • Drill guard with microswitch
  • Powerful 2 Hp spindle drive motor for heavy-duty cutting
  • Special spindle balance mechanism, superior to traditional balance mechanism and extends Balance Spring life
  • Coolant system
  • Low volt and overload protection
  • Tapping capacity in steel: .71" (18mm) maximum
  • Tapping capacity in cast iron: .87" (22mm) maximum
  • “EVRS" models are equipped with electronic variable speed and automatic feed reversing system for tapping
  • High/low speed range selector
  • Easily accessible table raiser
  • Head tilts left or right
  • Large production table and T-slotted base
  • Three power downfeed rates
$6,342.86
$5,119.00
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
  • 2 head drill press
$30,185.00
$29,495.00
  • Main Motor: 1 1/2 HP
  • Table 22" x 19 1/2"
  • Spindle Stroke: 5 1/8"
  • Spindle RPM: 60~1500 RPM
  • Simple push or pull on the center bar knob sets the jaw in position
  • Base is designed for clear through drilling applications
  • Easy press locking lever cams the jaw ahead 3/32”
  • Unique top locking lever can be raised or lowered to
$324.00
$216.66
  • Equipped with hydraulic separate clamping unit. Vertical movement of arm is coordinated by an IC timer. With a single touch on push button switch, you can have the arm unclamped then move vertically, or stop then clamp automatically. Very easy to operate, and tools will always stay at the same point after tool shifting
  • Powerful 5 Hp, 2-speed, heavy-duty spindle drive motor
  • Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage
  • CSA Electrics Standard
  • Quick Change Bit 
  • Motor HP 1/2
  • Drill Capacity 5/8" 
  • Speed Range 240-3400fpm
  • Overall Height 64"
  • Tapping capacity in steel: up to .87" (30mm) maximum
  • Tapping capacity in cast iron: up to 1.18" (30mm) maximum
  • Large worktable with 3 T-slots,
  • Emergency STOP
  • CSA Coolant System
  • Front Mounted LED Spindle RPM Readout
  • Front mounted positive control depth stop
  • Large Hand Grips designed with the users comfort in mind
  • Large precision ground T-Slot production table for easy set ups
$7,235.71
$5,839.00
On Sale
Wilton Cam Action Drill Press Vise 1208, 8" Jaw Width, 8-3/16" Jaw Opening 13403 at Elite Metal Tools
  • Simple push or pull on the center bar knob sets the jaw in position
  • Base is designed for clear through drilling applications
  • Easy press locking lever cams the jaw ahead 3/32”
  • Unique top locking lever can be raised or lowered to
$700.00
$483.52
  • Drilling capacity: 1.97”
  • Quill stroke: 8”
  • Speed range: 50 rpm - 2200 rpm
  • Quill feeds: 0.08; 0.12; 0.17; 0.24; 0.35; 0.50 (6) in/R
  • Spindle Taper MT3
  • Table Slot .625"
  • Tapping Capacity 1/2"
  • Main Motor 2 hp
$6,878.57
$5,599.00
  • Easily accessible table raiser
  • Head tilts left or right
  • Heavy-duty design allows a variety of precision drilling and tapping applications
  • Integrated tapping and reversing controls
  • Large production table and T-slotted base
$7,210.00
$5,889.00
  • 1/8HP Coolant Motor 
  • 1.5" Drill Capacity 
  • 85-4000rpm Spindle Speed
  • Tapping Capacity 3/4" 
$8,461.43
$6,975.00
  • Spindle Travel: 5.9"
  • Quill Diameter: 2.44”
  • Tapping Capacity: 5/8"
  • Drill Capacity: 1.25"
$8,147.14
$6,719.00
  • 3.5HP Motor 
  • 1.5" Drill Capacity 
  • 108-1800rpm Spindle Speed
  • 7.48" Spindle Travel 

 

$7,247.14
$5,899.00