Floor Drill Presses

  • 2 head drill press
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
  • Drilling capacity in steel: up to 1.57" (40mm) maximum
  • Drilling capacity in cast iron: up to 1.77" (45mm) maximum
  • Depth scale and adjustable depth stop
  • Built-in low voltage electrical equipment in machine head
  • Tapping capacity in steel: up to .87" (30mm) maximum
  • Tapping capacity in cast iron: up to 1.18" (30mm) maximum
  • Large worktable with 3 T-slots,
  • Emergency STOP
  • 5 head drill press
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
$48,340.00
$46,395.00
  • 2 hp motor runs on 220-volt 3-phase power.
  • 26-3/4” swing to tackle large pieces of material
  • Drills a maximum capacity of 1.57” with a tapping capacity of up to 1”
  • Massive column and cast steel base reduce flexing even when you’re drilling at full capacity
$12,510.00
$10,309.00
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
  • Single head drill press
  • Motor: 1-1/2 HP, 220V, 3-phase, 5.5A
  • Spindle travel: 5"
  • Cross travel: 7-1/4"
  • Table size: 23" L x 7-1/2" W x 1-3/4" T
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
  • 2 head drill press
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
  • 3 head drill press
  • Easily accessible table raiser
  • Head tilts left or right
  • Large production table and T-slotted base
  • Three power downfeed rates
$7,162.57
$5,839.00
  • Quill Stroke: 10"
  • Table Set Up Area: 19" x 22"
  • Throat: 13"
  • Spindle Speed: (9) 45 - 850 rpm
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
  • 4 head drill press
  • Base Size: 10-1/2” x 16-3/4”
  • Overall Height: 62”
  • Motor: 1/2HP 1Ph 115V
  • Drilling Capacity: 3/4"
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
  • 4 head drill press
  • Drilling capacity in steel: 1" (25mm) maximum
  • Drilling capacity in cast iron: 1.18" (30mm) maximum
  • “EV" models are equipped with electronic variable speed
  • Automatic tool ejector
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
  • 2 head drill press
  • Quill Stroke: 7"
  • Throat: 13"
  • Vertical Head Travel: 11"
  • Drilling Capacity: 2"
  • Tapping capacity in steel: .71" (18mm) maximum
  • Tapping capacity in cast iron: .87" (22mm) maximum
  • “EVRS" models are equipped with electronic variable speed and automatic feed reversing system for tapping
  • Automatic tool ejector
  • Max. Drill Size - 5/8"
  • 3/4 HP
  • 3-3/8" Spindle Travel
  • 12" Table
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
  • Single head drill press
  • Drilling capacity in steel: up to 1.26" (32mm) maximum
  • Drilling capacity in cast iron: up to 1.38" (35mm) maximum
  • Feed crank wheel for manual feed
  • Depth scale and adjustable depth stop
  • Drilling Capacity: 2"
  • Spindle Nose-To-Table Distance (Max.): 30"
  • Vertical Head Travel: 8"
  • Throat: 13"
  • Motor: 2HP - 240V - 3PH - 60Hz
  • Number of Speeds: 12
  • Table Work Surface: 16-3/4" x 17-1/2"
  • Spindle to Table: 29-3/4"
$7,820.00
$7,275.00
  • “RS" models are equipped with automatic feed reversing TL25 system for tapping
  • Spindle reversing switch
  • High/low speed range selector
  • Drill guard with microswitch