Radial Arm Drills

  • Drilling Capacity: 2"
  • Spindle Travel: 12.4"
  • Spindle Speeds: 25 to 2500 RPM
  • Morse Taper 5 Spindle
$31,595
As low as $625.26/mo

  • Drilling Capacity: 1.5"
  • Spindle Travel: 9.4"
  • Spindle To Base: 4.72" to 33.85"
  • Morse Taper 4 Spindle
$15,495
As low as $306.64/mo

  • Drilling Capacity: 2"
  • Spindle Travel: 12.4"
  • Spindle Feeds: .0016" to .126"
  • Morse Taper 5 Spindle
$36,995
As low as $732.13/mo

  • Drilling depth (max.): 20”
  • Motor rating main drive : 20.1 Hp
  • Drilling capacity : 3.94”
  • Speed range: 8 rpm - 1000 rpm
$243,874.28
As low as $4,826.27/mo

  • Max. Drill Capacity: 2-1/2" (No.45 steel) & 2-7/8" (HT200 cast iron)
  • Max. Tapping Capacity: 1-3/4" (No.45 steel) & 2" (HT200 cast iron)
  • Distance from Spindle to Column Center: 13-3/4" to 63"
  • Diameter of Column: 13.7"
MSRP: $46,968.57
$38,689
As low as $765.65/mo

  • 2" maximum drilling capacity
  • Heavy duty construction
  • Power down feed
  • Large 63" column
MSRP: $31,102.86
$25,625
As low as $507.11/mo

  • 1.57" maximum drilling capacity
  • Heavy duty construction
  • Power down feed
  • 39.3" reach
MSRP: $16,170
$13,325
As low as $433.06/mo

  • Diameter to Column: 8.29”
  • Head Travel: 25.20”
  • Column to Spindle: 33.46”
  • Motor: 220V, 3 HP
$19,895
As low as $393.72/mo

  • Diameter to Column: 8.29”
  • Head Travel: 25.20”
  • Column to Spindle: 33.46”
  • Motor: 440V, 3 HP
$19,895
As low as $393.72/mo

  • Equipped with hydraulic separate clamping unit. Vertical movement of arm is coordinated by an IC timer. With a single touch on push button switch, you can have the arm unclamped then move vertically, or stop then clamp automatically. Very easy to operate, and tools will always stay at the same point after tool shifting
  • Powerful 5 Hp, 2-speed, heavy-duty spindle drive motor
  • Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage
    Coolant system
  • CSA Electrics Standard
$33,735
As low as $667.61/mo

  • Diameter to Column: 12”
  • Head Travel: 35”
  • Column to Spindle: 48”
  • Motor: 220V, 5 HP
$32,895
As low as $650.99/mo

  • Diameter to Column: 12”
  • Head Travel: 35”
  • Column to Spindle: 48”
  • Motor: 440V, 5 HP
$32,895
As low as $650.99/mo

  • Powerful 2 Hp spindle drive motor for heavy-duty cutting
  • Special spindle balance mechanism, superior to traditional balance mechanism and extends Balance Spring life
  • Coolant system
  • Low volt and overload protection
$18,325
As low as $362.65/mo

  • Drilling capacity: 1.97”
  • Table set up area: 47” x 20”
  • Tapping capacity, steel: M 32 null
  • Throat: 25”
$62,806.83
As low as $1,242.94/mo

  • Equipped with hydraulic separate clamping unit. Vertical movement of arm is coordinated by an IC timer. With a single touch on push button switch, you can have the arm unclamped then move vertically, or stop then clamp automatically. Very easy to operate, and tools will always stay at the same point after tool shifting
  • Powerful 5 Hp, 2-speed, heavy-duty spindle drive motor
  • Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage
  • CSA Electrics Standard
$42,825
As low as $847.50/mo

  • Diameter to Column: 22”
  • Head Travel: 79”
  • Column to Spindle: 98”
  • Motor: 220V, 10 HP
$162,995
As low as $3,225.67/mo

  • Diameter to Column: 22”
  • Head Travel: 79”
  • Column to Spindle: 98”
  • Motor: 440V, 10 HP
$162,995
As low as $3,225.67/mo

  • Drilling depth (max.): 12”
  • Drilling capacity: 2.44”
  • Motor rating main drive: 5.4 Hp
  • Speed range: 38 rpm - 2000 rpm
$49,064.44
As low as $970.98/mo

  • Drilling capacity: 2.36”
  • Drilling depth (max.): 12”
  • Speed range: 38 rpm - 2000 rpm
  • Motor rating main drive: 5.4 Hp
$52,214.17
As low as $1,033.31/mo

  • Drilling Capacity: 1.26”
  • Column Diameter: 8”
  • Throat: 13” – 32”
  • Spindle nose-to-table surface distance: 13” – 34”
$16,092.50
As low as $318.47/mo

  • Drilling Steel: 2 9/16"
  • Drilling Cast Iron: 2 3/4"
  • Spindle Taper: MT #5
  • Spindle Travel: 44 7/8"
$85,562.40
As low as $1,693.27/mo

  • Diameter to Column: 17”
  • Head Travel: 50”
  • Column to Spindle: 63”
  • Motor: 220V, 7.5 HP
$73,000
As low as $1,444.67/mo

  • Diameter to Column: 17”
  • Head Travel: 50”
  • Column to Spindle: 63”
  • Motor: 440V, 7.5 HP
$73,000
As low as $1,444.67/mo

  • Drilling Capacity Steel: 1 1/2"
  • Drilling Capacity Cast Iron: 2"
  • Spindle Stroke: 7 7/8"
  • Spindle Speed (# Steps): (6) 88~1500RPM
$18,720.90
As low as $370.48/mo