By Category

Hoists & Cranes

  • Layout
MPI 20” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-500-REN at Elite Metal Tools
MPI 20” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-500-REN
  • Chuck Diameter: 20”
  • Holding Force: 140N/cm² / 203lbs/in²
  • Min Workpiece Size: 35mm / 1.377”
  • Regrinding Limit: 5mm / 0.2”
MSRP: $10,046
$8,999
As low as $292.46/mo
View Details
MPI 32” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-800-REN at Elite Metal Tools
MPI 32” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-800-REN
  • Chuck Diameter: 32”
  • Holding Force: 140N/cm² / 203lbs/in²
  • Min Workpiece Size: 35mm / 1.377”
  • Regrinding Limit: 5mm / 0.2”
MSRP: $24,860
$22,200
As low as $439.33/mo
View Details
MPI 110V 40mm Magnetic Field Depth Handheld Demagnetizer HHDM-HD2 at Elite Metal Tools
MPI 110V 40mm Magnetic Field Depth Handheld Demagnetizer HHDM-HD2
  • Voltage: 110V
  • Depth of Magnetic Field: max 1.57” / 40mm
  • 10 ft Power Supply Cable with Plug
  • Duty Cycle: 20%, maximum operating time 10 minutes
MSRP: $1,370
$1,281
As low as $41.63/mo
View Details
Norco 10 Ton Capacity Air Lift Jack 82999 at Elite Metal Tools
Norco 10 Ton Capacity Air Lift Jack 82999
  • Capacity @ 200 PSI: 10 Ton
  • Lift Height High: 50"
  • Saddle Reach: 14.75"
  • Automatic safety lock engages in six different height positions independent of air pressure
MSRP: $9,411.28
$5,125
As low as $166.56/mo
View Details
Norco 20 Ton Floor Jack with FASTJACK 72220A at Elite Metal Tools
Norco 20 Ton Floor Jack with FASTJACK 72220A
  • Lift Height Low: 7.25"
  • Lift Height High: 26.25"
  • Handle Length: 45”
  • Includes the FASTJACK® feature which raises the jack’s lifting saddle to the load with one pump of the “T” handle
MSRP: $6,178.46
$3,365
As low as $109.36/mo
View Details
Jet 5-Ton Hand Chain Hoist with 30' Lift | S90-500-30 101953 at Elite Metal Tools
Jet 5-Ton Hand Chain Hoist with 30' Lift | S90-500-30 101953
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $1,764
$1,128.99
As low as $36.69/mo
View Details
MPI 12”x24” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-300600-REN at Elite Metal Tools
MPI 12”x24” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-300600-REN
  • Chuck Dimensions: 12” x 24”
  • Holding Force: 100N/cm² / 145lbs/in²
  • Min Workpiece Size: 0.02” x 0.02” x 0.04”  
  • Regrinding Limit: 7mm / 0.275”
MSRP: $5,990
$5,032
As low as $163.54/mo
View Details
Jet JG-300A, 3 Ton Grip Puller with Cable 286530K at Elite Metal Tools
Jet JG-300A, 3 Ton Grip Puller with Cable 286530K
  • Double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch, or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $1,384
$883
As low as $28.69/mo
View Details
Jet 5-HDT, 5-Ton Manual Trolley 262050 at Elite Metal Tools
Jet 5-HDT, 5-Ton Manual Trolley 262050
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
  • Welded all-steel frame and powder coat finish provide maximum durability and protection
MSRP: $960
$617.10
As low as $20.05/mo
View Details
Jet MT500, 5 Ton Two Speed Electric Trolley 3-Phase 230V 140190 at Elite Metal Tools
Jet MT500, 5 Ton Two Speed Electric Trolley 3-Phase 230V 140190
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $4,723
$2,701.99
As low as $87.81/mo
View Details
Jet 5SS-1C-20 5 Ton 20' Lift 230V Material Handling Overhead Lifting Hoists Electric Hoists 512000 at Elite Metal Tools
Jet 5SS-1C-20 5 Ton 20' Lift 230V Material Handling Overhead Lifting Hoists Electric Hoists 512000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $10,008
$6,386
As low as $207.54/mo
View Details
Norco 3 Ton Shop Crane with Electro/Hydraulic Pump 78605A at Elite Metal Tools
Norco 3 Ton Shop Crane with Electro/Hydraulic Pump 78605A
  • Capacities @ 65”: 3 Ton
  • Min. Boom Height: 13"
  • Max. Boom Height: 149.5"
  • Includes an electro/hydraulic pump requiring 115 VAC
MSRP: $18,705.64
$10,155
As low as $330.03/mo
View Details
Steelmax MAX Lifter 2200lbs Lifting Capacity Permanent Lifting Magnet SM-ML-1000 at Elite Metal Tools
Steelmax MAX Lifter 2200lbs Lifting Capacity Permanent Lifting Magnet SM-ML-1000
  • Max Plate Load: 2200 lbs
  • Min Plate Thickness: 1½”
  • Max Round Stock Load: 880 lbs
  • Min Round Stock Thickness: 1”
$3,110
As low as $101.07/mo
View Details
Steelmax MAX Lifter 4400lbs Lifting Capacity Permanent Lifting Magnet SM-ML-2000 at Elite Metal Tools
Steelmax MAX Lifter 4400lbs Lifting Capacity Permanent Lifting Magnet SM-ML-2000
  • Max Plate Load: 4400 lbs
  • Min Plate Thickness: 2”
  • Max Round Stock Load: 1760 lbs
  • Min Round Stock Thickness: 1-3/8”
$5,415
As low as $175.98/mo
View Details
MPI 24” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-600-REN at Elite Metal Tools
MPI 24” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-600-REN
  • Chuck Diameter: 24”
  • Holding Force: 140N/cm² / 203lbs/in²
  • Min Workpiece Size: 35mm / 1.377”
  • Regrinding Limit: 5mm / 0.2”
MSRP: $14,237
$12,739
As low as $414.01/mo
View Details
Jet 3SS-1C-10, 3-Ton Electric Chain Hoist 1-Phase 10' Lift 311000 at Elite Metal Tools
Jet 3SS-1C-10, 3-Ton Electric Chain Hoist 1-Phase 10' Lift 311000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $7,656
$4,879.99
As low as $158.59/mo
View Details
Norco 10 Ton Capacity Air Lift Jack 82999Ai at Elite Metal Tools
Norco 10 Ton Capacity Air Lift Jack 82999Ai
  • Capacity @ 200 PSI: 10 Ton
  • Lift Height Low: 12.25"
  • Lift Height High: 49.5"
  • Saddle Reach: 11.18"
MSRP: $6,943.59
$3,795
As low as $123.33/mo
View Details
Jet 5-Ton Hand Chain Hoist with 15' Lift | S90-500-15 101951 at Elite Metal Tools
Jet 5-Ton Hand Chain Hoist with 15' Lift | S90-500-15 101951
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $1,322
$847.99
As low as $27.55/mo
View Details
Norco 20 Ton Air and/or Hydraulic Floor Jack 72230A at Elite Metal Tools
Norco 20 Ton Air and/or Hydraulic Floor Jack 72230A
  • Lift Height Low: 7.25"
  • Lift Height High: 26.25”
  • Handle Length: 45”
  • Capacity @ 120 PSI: 20 Ton
MSRP: $6,894.36
$3,735
As low as $121.38/mo
View Details
Jet 15-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100 1500WO-20 109100 at Elite Metal Tools
Jet 15-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100 1500WO-20 109100
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $7,028
$4,486.98
As low as $145.82/mo
View Details
Bison Lifting Equipment 2 Ton 3-Phase Single Speed Electric Lifting Chain Hoist with Trolley HHBD02SK-01+WPC02 at Elite Metal Tools
Bison Lifting Equipment 2 Ton 3-Phase Single Speed Electric Lifting Chain Hoist with Trolley HHBD02SK-01+WPC02
  • 2 Ton Lifting Capacity
  • 20 Ft Standard lift
  • 30 Minute duty rating, H4 Classification
  • Trolley Included
MSRP: $7,000
$6,299.86
As low as $204.74/mo
View Details
Bison Lifting Equipment 5 Ton 3-Phase Single Speed Electric Lifting Chain Hoist with Trolley HHBD05SK-02+WPC05 at Elite Metal Tools
Bison Lifting Equipment 5 Ton 3-Phase Single Speed Electric Lifting Chain Hoist with Trolley HHBD05SK-02+WPC05
  • 5 Ton Lifting Capacity
  • 20 Ft Standard lift
  • 30 Minute duty rating, H4 Classification
  • Trolley Included
MSRP: $10,700
$9,629.43
As low as $312.95/mo
View Details
Norco 8.5 Ton Capacity Long Reach Air Lift Jack 82995 at Elite Metal Tools
Norco 8.5 Ton Capacity Long Reach Air Lift Jack 82995
  • Capacity @ 180 PSI: 8.5 Ton
  • Lift Height High: 50"
  • Saddle Reach: 50"
  • Includes extension tubes and adjustment pins for added height requirements
MSRP: $14,106.67
$7,645
As low as $248.46/mo
View Details
MPI 12”x32” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-300800-SGC at Elite Metal Tools
MPI 12”x32” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-300800-SGC
  • Chuck Size: 12” x 32”
  • Holding force: 110N/cm² / 159lbs/in²
  • Min. Workpiece Size: 25mm x 25mm x 3mm / 1" x 1" x .12"
  • Regrinding limit: 6 mm / .236"
MSRP: $10,219
$9,240
As low as $300.30/mo
View Details