By Category

Hoists & Cranes

  • Layout
MPI 14” 160N Holding Force Rare Earth Round Permanent Magnetic Chuck MAX-350-REN at Elite Metal Tools
MPI 14” 160N Holding Force Rare Earth Round Permanent Magnetic Chuck MAX-350-REN
  • Chuck Diameter: 14”
  • Holding Force: 160N/cm² / 232lbs/in²
  • Min Workpiece Size: 40mm x 8mm / 1.57” x 0.314”
  • Regrinding Limit: 10mm / 0.393”
MSRP: $5,667
$5,132
As low as $166.79/mo
View Details
Jet 1-Ton Hand Chain Hoist with 30' Lift | S90-100-30 101913 at Elite Metal Tools
Jet 1-Ton Hand Chain Hoist with 30' Lift | S90-100-30 101913
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $552
$399
View Details
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS100-230-020 140238 at Elite Metal Tools
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS100-230-020 140238
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $9,084
$5,697.99
As low as $185.18/mo
View Details
Jet 10-PT, 10-Ton Heavy Duty Manual Trolley 252060 at Elite Metal Tools
Jet 10-PT, 10-Ton Heavy Duty Manual Trolley 252060
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
MSRP: $2,501
$1,601.99
As low as $52.06/mo
View Details
Jet 20-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-2000WO-15 108015 at Elite Metal Tools
Jet 20-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-2000WO-15 108015
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $8,998
$5,741.58
As low as $186.60/mo
View Details
Jet TS500-460-015,5-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT500-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144014K at Elite Metal Tools
Jet TS500-460-015,5-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT500-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144014K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $18,610
$11,671
As low as $379.30/mo
View Details
Jet 2-Ton Hand Chain Hoist with 20' Lift | S90-200-20 101932 at Elite Metal Tools
Jet 2-Ton Hand Chain Hoist with 20' Lift | S90-200-20 101932
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $710
$483
View Details
Jet 3-PT, 3-Ton Heavy Duty Manual Trolley 252030 at Elite Metal Tools
Jet 3-PT, 3-Ton Heavy Duty Manual Trolley 252030
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
MSRP: $914
$584.46
As low as $18.99/mo
View Details
Jet JBC-3, 3-Ton Beam Clamp 252730 at Elite Metal Tools
Jet JBC-3, 3-Ton Beam Clamp 252730
  • Clamp jaw is designed to distribute the load away from the beam flange edge
  • Clamp jaw is designed to distribute the load away from the beam flange edge, increasing safety
  • Complies with ANSI / ASME B30.17 and B30.20 standards
  • Larger, thicker diameter pins for increased durability and life
  • Load tested to 125% of capacity with certificate
MSRP: $359
$227.99
View Details
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS300-230-015 140117 at Elite Metal Tools
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS300-230-015 140117
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $12,732
$7,985
As low as $259.51/mo
View Details
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS300-460-20 144012 at Elite Metal Tools
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS300-460-20 144012
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $13,222
$8,292
As low as $269.49/mo
View Details
Jet JLP-150A-10, 1-1/2 Ton Lever Hoist with 10' Lift 287401 at Elite Metal Tools
Jet JLP-150A-10, 1-1/2 Ton Lever Hoist with 10' Lift 287401
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $562
$405
View Details
Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS050-010 104022 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS050-010 104022
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $6,798
$4,263.99
As low as $138.57/mo
View Details
MPI 6”x10” 160N Holding Force Rare Earth Compact Milling Permanent Magnetic Chuck CMC-150250-REN at Elite Metal Tools
MPI 6”x10” 160N Holding Force Rare Earth Compact Milling Permanent Magnetic Chuck CMC-150250-REN
  • Chuck Dimensions: 6” x 10”
  • Holding Force: 160N/cm² / 232lbs/in²
  • Min Workpiece Size: 0.984” x 0.984” x 0.236”
  • Regrinding Limit: 10mm / 0.393”
MSRP: $1,769
$1,680
As low as $54.60/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | 1/2SS-1C-10 121100 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | 1/2SS-1C-10 121100
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $4,346
$2,778
As low as $90.28/mo
View Details
Jet TS100-460-010,1-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT100-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 144004K at Elite Metal Tools
Jet TS100-460-010,1-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT100-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 144004K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $10,652
$6,681
As low as $217.13/mo
View Details
Jet 1/2-Ton Hand Chain Hoist with 30' Lift | S90-050-30 101903 at Elite Metal Tools
Jet 1/2-Ton Hand Chain Hoist with 30' Lift | S90-050-30 101903
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $513
$327.99
View Details
Jet TS500-230-015,5-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT500 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140128K at Elite Metal Tools
Jet TS500-230-015,5-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT500 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140128K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $18,982
$11,904.99
As low as $386.91/mo
View Details
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 15 'Lift | TS500-230-015 140128 at Elite Metal Tools
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 15 'Lift | TS500-230-015 140128
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $16,406
$10,289
As low as $334.39/mo
View Details
Jet 5-Ton Hand Chain Hoist with 20' Lift | S90-500-20 101952 at Elite Metal Tools
Jet 5-Ton Hand Chain Hoist with 20' Lift | S90-500-20 101952
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $1,432
$914.94
As low as $29.73/mo
View Details
MPI 16”x32” 60 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-420800-EP at Elite Metal Tools
MPI 16”x32” 60 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-420800-EP
  • Chuck Size: 16” x 32”
  • Holding force: 170 N/cm² / 246 lbs/cm²
  • Min. Workpiece Size: 50mm x 110mm x 20mm / 2” x 4.3” x 0.787”
  • Regrinding limit: 6mm / .236”
MSRP: $13,103
$12,350
As low as $401.37/mo
View Details
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS100-460-020 144006 at Elite Metal Tools
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS100-460-020 144006
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $8,741
$5,482.99
As low as $178.19/mo
View Details
Jet JLH-50-10, 1/2-Ton Compact Lever Hoist With 10' Lift 181510 at Elite Metal Tools
Jet JLH-50-10, 1/2-Ton Compact Lever Hoist With 10' Lift 181510
  • Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Cast steel safety latches
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
  • Heat Treated Load Plates
MSRP: $452
$295.80
View Details
Jet 3-Ton Aluminum Hand Chain Hoist with 20ft of Lift | AL100-300-20 133320 at Elite Metal Tools
Jet 3-Ton Aluminum Hand Chain Hoist with 20ft of Lift | AL100-300-20 133320
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $1,582
$1,013.99
As low as $32.95/mo
View Details