By Category

Hoists & Cranes

  • Layout
MPI 6”x18” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-150450-REN at Elite Metal Tools
MPI 6”x18” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-150450-REN
  • Chuck Dimensions: 6” x 18”
  • Holding Force: 100N/cm² / 145lbs/in²
  • Min Workpiece Size: 0.02” x 0.02” x 0.04”  
  • Regrinding Limit: 7mm / 0.275”
MSRP: $2,339
$1,994
As low as $64.80/mo
View Details
MPI 7kN Holding Force Permanent Magnetic Block Set of Two MPB-700 at Elite Metal Tools
MPI 7kN Holding Force Permanent Magnetic Block Set of Two MPB-700
  • Holding Force: 7kN/cm²
  • Dimensions: 2.5” x 7” x 2.8”
  • Clamping Area 1: 6.14” x 2.24”
  • Clamping Area 2: 6.77” x 2.52”
MSRP: $2,034
$1,670
As low as $54.27/mo
View Details
Jet 5SS-1C-15, 5-Ton Electric Chain Hoist 1-Phase 15' Lift 511500 at Elite Metal Tools
Jet 5SS-1C-15, 5-Ton Electric Chain Hoist 1-Phase 15' Lift 511500
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $9,566
$6,103
As low as $198.34/mo
View Details
Jet 5-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-500WO-30 208130 at Elite Metal Tools
Jet 5-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-500WO-30 208130
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $2,384
$1,524.90
As low as $49.55/mo
View Details
Jet MT100-4, 1- Ton Two Speed Electric Trolley 3-Phase 460V 144185 at Elite Metal Tools
Jet MT100-4, 1- Ton Two Speed Electric Trolley 3-Phase 460V 144185
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduce bump firing to while still allowing for high-speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $3,438
$2,156.99
As low as $70.10/mo
View Details
Jet JLP-025A-10 1/4 Ton Mini-Puller, 10' Lift 287101 at Elite Metal Tools
Jet JLP-025A-10 1/4 Ton Mini-Puller, 10' Lift 287101
  • Cast steel safety latches are secured with Allen screws and lock nuts
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging
MSRP: $294
$198
View Details
Jet VOLT 2T Variable-Speed Electric Hoist 3PH 230V 10' Lift 183210 at Elite Metal Tools
Jet VOLT 2T Variable-Speed Electric Hoist 3PH 230V 10' Lift 183210
  • Electromagnetic brake design is an industry-proven safety feature that secures the load even if power is interrupted to the hoist
  • Eliminates bump-firing when positioning the work piece reducing downtime and maintenance
  • Heavy-duty nylon chain bag with reinforcing metal brackets included
  • Industry proven Grade 80 black oxide coated load chain
  • JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
MSRP: $9,245
$5,893.99
As low as $191.55/mo
View Details
MPI 8”x16” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-200400-SGC at Elite Metal Tools
MPI 8”x16” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-200400-SGC
  • Chuck Size: 8” x 16”
  • Holding force: 110N/cm² / 159lbs/in²
  • Min. Workpiece Size: 25mm x 25mm x 3mm / 1" x 1" x .12"
  • Regrinding limit: 6 mm / .236"
MSRP: $4,728
$4,288
As low as $139.36/mo
View Details
Jet JLP-150A-10SH, 1-1/2 Ton Lever Hoist, 10' Lift & Shipyard Hooks 287701 at Elite Metal Tools
Jet JLP-150A-10SH, 1-1/2 Ton Lever Hoist, 10' Lift & Shipyard Hooks 287701
  • All steel construction
  • Impact resistant all steel construction for added durability and protection
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
  • NEW! Redesigned ergonomic grip allows for greater operator control and increased comfort
MSRP: $581
$415
View Details
Jet MT300-4, 3 Ton Two Speed Electric Trolley 3-Phase 460V 144189 at Elite Metal Tools
Jet MT300-4, 3 Ton Two Speed Electric Trolley 3-Phase 460V 144189
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $4,320
$2,709.99
As low as $88.07/mo
View Details
Jet 3-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-300-30 133330 at Elite Metal Tools
Jet 3-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-300-30 133330
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $2,170
$1,385
As low as $45.01/mo
View Details
Jet 1-1/2-Ton Hand Chain Hoist with 15ft of Lift | AL100-150-15 133122 at Elite Metal Tools
Jet 1-1/2-Ton Hand Chain Hoist with 15ft of Lift | AL100-150-15 133122
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $860
$551.99
As low as $17.93/mo
View Details
Jet JLH-150WO-15, 1-1/2 Ton, Lever Hoist with 15' Lift with Overload Protection 376303 at Elite Metal Tools
Jet JLH-150WO-15, 1-1/2 Ton, Lever Hoist with 15' Lift with Overload Protection 376303
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $906
$590.58
As low as $19.19/mo
View Details
Jet TS100-230-015,1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT100 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140237K at Elite Metal Tools
Jet TS100-230-015,1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT100 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140237K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $11,018
$6,910
As low as $224.57/mo
View Details
Jet 1-1/2-PT, 1-1/2-Ton Heavy Duty Manual Trolley 252015 at Elite Metal Tools
Jet 1-1/2-PT, 1-1/2-Ton Heavy Duty Manual Trolley 252015
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
MSRP: $430
$274.99
View Details
Bison Lifting Equipment 2 Ton Manual 20 FT Lifting Chain Hoist with Premium Galvanized Chain CH20-20-G at Elite Metal Tools
Bison Lifting Equipment 2 Ton Manual 20 FT Lifting Chain Hoist with Premium Galvanized Chain CH20-20-G
  • 2 Ton Lifting Capacity
  • 20 Ft Standard lift
  • Premium Galvanized load Chain
  • Double-Pawl Load Brake
$554.86
As low as $18.03/mo
View Details
Bison Lifting Equipment 5 Ton Manual 10 FT Lifting Chain Hoist with Premium Galvanized Chain CH50-10-G at Elite Metal Tools
Bison Lifting Equipment 5 Ton Manual 10 FT Lifting Chain Hoist with Premium Galvanized Chain CH50-10-G
  • 5 Ton Lifting Capacity
  • 10 Ft Standard lift
  • Premium Galvanized load Chain
  • Double-Pawl Load Brake
$839.86
As low as $27.29/mo
View Details
Jet JLP-050A-15, 1/2 Ton Mini-Puller, 15' Lift 287202 at Elite Metal Tools
Jet JLP-050A-15, 1/2 Ton Mini-Puller, 15' Lift 287202
  • Cast steel safety latches are secured with Allen screws and lock nuts
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging
MSRP: $418
$274.38
View Details
Jet 1-1/2-Ton Aluminum Hand Chain Hoist with 10ft of Lift | AL100-150-10 133121 at Elite Metal Tools
Jet 1-1/2-Ton Aluminum Hand Chain Hoist with 10ft of Lift | AL100-150-10 133121
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $752
$499
View Details
Jet 1/2-Ton Aluminum Hand Chain Hoist with 10ft of lift | AL100-050-10 133051 at Elite Metal Tools
Jet 1/2-Ton Aluminum Hand Chain Hoist with 10ft of lift | AL100-050-10 133051
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $582
$411
View Details
Jet JLH-100WO-10 1 Ton Lever Hoist, 10' Lift with Overload Protection 376201 at Elite Metal Tools
Jet JLH-100WO-10 1 Ton Lever Hoist, 10' Lift with Overload Protection 376201
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $666
$460
View Details
Jet 5-Ton Aluminum Hand Chain Hoist with 15ft of Lift | AL100-500-15 133515 at Elite Metal Tools
Jet 5-Ton Aluminum Hand Chain Hoist with 15ft of Lift | AL100-500-15 133515
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $1,806
$1,154
As low as $37.50/mo
View Details
MPI 13”x13” 160N Holding Force Rare Earth Compact Milling Permanent Magnetic Chuck CMC-320320-REN at Elite Metal Tools
MPI 13”x13” 160N Holding Force Rare Earth Compact Milling Permanent Magnetic Chuck CMC-320320-REN
  • Chuck Dimensions: 13” x 13”
  • Holding Force: 160N/cm² / 232lbs/in²
  • Min Workpiece Size: 0.984” x 0.984” x 0.236”
  • Regrinding Limit: 10mm / 0.393”
$3,332
As low as $108.29/mo
View Details
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS100-460-010 144004 at Elite Metal Tools
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS100-460-010 144004
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $8,080
$5,068
As low as $164.71/mo
View Details