By Category

Hoists & Cranes

  • Layout
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS100-230-020 140238 at Elite Metal Tools
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS100-230-020 140238
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $9,799.99
$5,425
As low as $176.31/mo
View Details
Jet TS300-460-020,3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT300-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 144012K at Elite Metal Tools
Jet TS300-460-020,3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT300-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 144012K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $16,128.99
$8,865
As low as $288.11/mo
View Details
Jet 2-Ton Hand Chain Hoist with 20' Lift | S90-200-20 101932 at Elite Metal Tools
Jet 2-Ton Hand Chain Hoist with 20' Lift | S90-200-20 101932
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $753.99
$510
As low as $16.57/mo
View Details
Jet 2-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-200WO-10 105100 at Elite Metal Tools
Jet 2-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-200WO-10 105100
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $910.99
$605
As low as $19.66/mo
View Details
Jet 20-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-2000WO-15 108015 at Elite Metal Tools
Jet 20-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-2000WO-15 108015
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $9,287.99
$5,175
As low as $168.18/mo
View Details
Jet 1-Ton Electric Chain Hoist 1-Phase 10' Lift | 1SS-1C-10 111000 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 1-Phase 10' Lift | 1SS-1C-10 111000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $6,283.99
$3,575
As low as $116.18/mo
View Details
Jet 5SS-1C-10, 5-Ton Electric Chain Hoist 1-Phase 10' Lift 511000 at Elite Metal Tools
Jet 5SS-1C-10, 5-Ton Electric Chain Hoist 1-Phase 10' Lift 511000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $10,683.99
$5,875
As low as $190.93/mo
View Details
Bison Lifting Equipment 5 Ton Manual 20 FT Lifting Chain Hoist with Premium Galvanized Chain CH50-20-G at Elite Metal Tools
Bison Lifting Equipment 5 Ton Manual 20 FT Lifting Chain Hoist with Premium Galvanized Chain CH50-20-G
  • 5 Ton Lifting Capacity
  • 20 Ft Standard lift
  • Premium Galvanized load Chain
  • Double-Pawl Load Brake
$970.68
As low as $31.54/mo
View Details
Jet 1-Ton Hand Chain Hoist with 30' Lift | S90-100-30 101913 at Elite Metal Tools
Jet 1-Ton Hand Chain Hoist with 30' Lift | S90-100-30 101913
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $602.99
$435
View Details
Jet 5-Ton Aluminum Hand Chain Hoist with 15ft of Lift | AL100-500-15 133515 at Elite Metal Tools
Jet 5-Ton Aluminum Hand Chain Hoist with 15ft of Lift | AL100-500-15 133515
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $2,006.99
$1,199
As low as $38.96/mo
View Details
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 15 'Lift | TS500-230-015 140128 at Elite Metal Tools
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 15 'Lift | TS500-230-015 140128
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $17,693.99
$9,799
As low as $318.46/mo
View Details
MPI 8 x16” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-200400-REN at Elite Metal Tools
MPI 8 x16” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-200400-REN
  • Chuck Dimensions: 8” x 16”
  • Holding Force: 100N/cm² / 145lbs/in²
  • Min Workpiece Size: 0.02” x 0.02” x 0.04”  
  • Regrinding Limit: 7mm / 0.275”
MSRP: $2,980
$2,543
As low as $82.64/mo
View Details
Jet TS100-460-010,1-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT100-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 144004K at Elite Metal Tools
Jet TS100-460-010,1-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT100-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 144004K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $11,759.98
$6,620
As low as $215.15/mo
View Details
MPI 12”x20” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-300500-REN at Elite Metal Tools
MPI 12”x20” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-300500-REN
  • Chuck Dimensions: 12” x 20”
  • Holding Force: 100N/cm² / 145lbs/in²
  • Min Workpiece Size: 0.02” x 0.02” x 0.04”  
  • Regrinding Limit: 7mm / 0.275”
MSRP: $5,425
$4,555
As low as $148.03/mo
View Details
Jet 1/2-Ton Hand Chain Hoist with 30' Lift | S90-050-30 101903 at Elite Metal Tools
Jet 1/2-Ton Hand Chain Hoist with 30' Lift | S90-050-30 101903
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $562.99
$415
View Details
Jet MT300, 3 Ton Two Speed Electric Trolley 3-Phase 230V 140189 at Elite Metal Tools
Jet MT300, 3 Ton Two Speed Electric Trolley 3-Phase 230V 140189
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $4,753.99
$2,695
As low as $87.58/mo
View Details
Jet TS200-230-010, 2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT200 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140239K at Elite Metal Tools
Jet TS200-230-010, 2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT200 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140239K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $13,870.99
$7,699
As low as $250.21/mo
View Details
Jet JBC-3, 3-Ton Beam Clamp 252730 at Elite Metal Tools
Jet JBC-3, 3-Ton Beam Clamp 252730
  • Clamp jaw is designed to distribute the load away from the beam flange edge
  • Clamp jaw is designed to distribute the load away from the beam flange edge, increasing safety
  • Complies with ANSI / ASME B30.17 and B30.20 standards
  • Larger, thicker diameter pins for increased durability and life
  • Load tested to 125% of capacity with certificate
MSRP: $378.99
$259
View Details
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS200-460-015 144008 at Elite Metal Tools
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS200-460-015 144008
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $13,190.99
$7,355
As low as $239.03/mo
View Details
Jet 5SS-3C-10, 5-Ton Electric Chain Hoist 3-Phase 10' lift 531000 at Elite Metal Tools
Jet 5SS-3C-10, 5-Ton Electric Chain Hoist 3-Phase 10' lift 531000
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $10,011.99
$5,535
As low as $179.88/mo
View Details
Jet HD-3T, 3-Ton Wide Beam Clamp 202730 at Elite Metal Tools
Jet HD-3T, 3-Ton Wide Beam Clamp 202730
  • Clamp jaw is designed to distribute the load away from the beam flange edge
  • Clamp jaw is designed to distribute the load away from the beam flange edge, increasing safety
  • Complies with ANSI / ASME B30.17 and B30.20 standards
  • Load tested to 125% of capacity with certificate
  • Used for quick mounting of a hoist on a broad range of beams up to 12-3/5 inches wide for increased versatility
MSRP: $237.99
$185
View Details
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS100-460-020 144006 at Elite Metal Tools
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS100-460-020 144006
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $9,423.99
$5,229
As low as $169.94/mo
View Details
Jet JLP-150A-10, 1-1/2 Ton Lever Hoist with 10' Lift 287401 at Elite Metal Tools
Jet JLP-150A-10, 1-1/2 Ton Lever Hoist with 10' Lift 287401
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $595.99
$435
View Details
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS300-460-20 144012 at Elite Metal Tools
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS300-460-20 144012
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $14,265.99
$7,905
As low as $256.91/mo
View Details