By Category

Hoists & Cranes

MPI 10”x16” 160N Holding Force Rare Earth Compact Milling Permanent Magnetic Chuck CMC-250400-REN

Chuck Dimensions: 10” x 16”
Holding Force: 160N/cm² / 232lbs/in²
Min Workpiece Size: 0.984” x 0.984” x 0.236”
Regrinding Limit: 10mm / 0.393”

$3,608

As low as $117.26/mo

View Details

MPI 8”x24” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-200600-SGC

Chuck Size: 8” x 24”
Holding force: 110N/cm² / 159lbs/in²
Min. Workpiece Size: 25mm x 25mm x 3mm / 1" x 1" x .12"
Regrinding limit: 6 mm / .236"

MSRP: ~~$5,682~~

$5,101

As low as $165.78/mo

View Details

MPI 6”x18” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-150450-REN

Chuck Dimensions: 6” x 18”
Holding Force: 100N/cm² / 145lbs/in²
Min Workpiece Size: 0.02” x 0.02” x 0.04”
Regrinding Limit: 7mm / 0.275”

MSRP: ~~$2,339~~

$1,994

As low as $64.80/mo

View Details

Jet 1/8-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS018-020 104002

Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
TAA Approved
Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
Overload protection using slip clutch system to protect hoist from loads over rated capacities
Hoist carries a dust and moisture rating of IP-55 and the wireless transmitter IP-65 which means hoist can stay in the light rain and pendant is dust and water proof.

MSRP: ~~$5,656~~

$3,547.43

As low as $115.29/mo

View Details

Jet 5SS-1C-15, 5-Ton Electric Chain Hoist 1-Phase 15' Lift 511500

24 volt push button controller with cable strain relief system for durability and reliability
All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability

MSRP: ~~$9,566~~

$6,103

As low as $198.34/mo

View Details

Jet 5-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-500WO-30 208130

Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist

MSRP: ~~$2,384~~

$1,524.90

As low as $49.55/mo

View Details

Jet VOLT 2T Variable-Speed Electric Hoist 3PH 230V 10' Lift 183210

Electromagnetic brake design is an industry-proven safety feature that secures the load even if power is interrupted to the hoist
Eliminates bump-firing when positioning the work piece reducing downtime and maintenance
Heavy-duty nylon chain bag with reinforcing metal brackets included
Industry proven Grade 80 black oxide coated load chain
JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments

MSRP: ~~$9,245~~

$5,893.99

As low as $191.55/mo

View Details

Jet MT100-4, 1- Ton Two Speed Electric Trolley 3-Phase 460V 144185

Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
TAA Approved
Two speeds reduce bump firing to while still allowing for high-speed movement of materials
Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
Expanded flange capacity kits are available

MSRP: ~~$3,438~~

$2,156.99

As low as $70.10/mo

View Details

Jet JLP-025A-10 1/4 Ton Mini-Puller, 10' Lift 287101

Cast steel safety latches are secured with Allen screws and lock nuts
Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
Hooks slowly stretch to indicate an overload situation increasing jobsite safety
Impact resistant all steel construction for added durability and protection
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging

MSRP: ~~$294~~

$198

View Details

Jet JLP-150A-10SH, 1-1/2 Ton Lever Hoist, 10' Lift & Shipyard Hooks 287701

All steel construction
Impact resistant all steel construction for added durability and protection
Needle bearings support the load sheave to increase efficiency and promote smooth operation
JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
NEW! Redesigned ergonomic grip allows for greater operator control and increased comfort

MSRP: ~~$581~~

$415

View Details

Jet 3-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-300-30 133330

Extra large hand chain opening for side chain pulling
Sealed housing to provide extra protection against the elements
Complies with ANSI/ASME B30.16 and HAST-2 Standards
Cast steel safety latches
Dual pawl Weston style brake

MSRP: ~~$2,170~~

$1,385

As low as $45.01/mo

View Details

Jet 1-1/2-Ton Hand Chain Hoist with 15ft of Lift | AL100-150-15 133122

Extra large hand chain opening for side chain pulling
Sealed housing to provide extra protection against the elements
Complies with ANSI/ASME B30.16 and HAST-2 Standards
Cast steel safety latches
Dual pawl Weston style brake

MSRP: ~~$860~~

$551.99

As low as $17.93/mo

View Details

Jet JLH-150WO-15, 1-1/2 Ton, Lever Hoist with 15' Lift with Overload Protection 376303

All steel construction
Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
Enhanced ergonomic grip allows for greater operator control and increased comfort
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates

MSRP: ~~$906~~

$590.58

As low as $19.19/mo

View Details

Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | 1/2SS-1C-10 121100

24 volt push button controller with cable strain relief system for durability and reliability
All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability

MSRP: ~~$4,346~~

$2,778

As low as $90.28/mo

View Details

Jet TS100-230-015,1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT100 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140237K

The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
Two Speed Motor ensures the correct speed for the job with a click of a button
IP55 TEFC Motor with Class F insulation for working in harsh environments

MSRP: ~~$11,018~~

$6,910

As low as $224.57/mo

View Details

Jet 1-1/2-PT, 1-1/2-Ton Heavy Duty Manual Trolley 252015

Built-in bumper guards on the side plates increase safety and extend trolley life
Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection

MSRP: ~~$430~~

$274.99

View Details

Jet JLP-050A-15, 1/2 Ton Mini-Puller, 15' Lift 287202

Cast steel safety latches are secured with Allen screws and lock nuts
Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
Hooks slowly stretch to indicate an overload situation increasing jobsite safety
Impact resistant all steel construction for added durability and protection
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging

MSRP: ~~$418~~

$274.38

View Details

Bison Lifting Equipment 5 Ton Manual 10 FT Lifting Chain Hoist with Premium Galvanized Chain CH50-10-G

5 Ton Lifting Capacity
10 Ft Standard lift
Premium Galvanized load Chain
Double-Pawl Load Brake

$839.86

As low as $27.29/mo

View Details

MPI 13”x13” 160N Holding Force Rare Earth Compact Milling Permanent Magnetic Chuck CMC-320320-REN

Chuck Dimensions: 13” x 13”
Holding Force: 160N/cm² / 232lbs/in²
Min Workpiece Size: 0.984” x 0.984” x 0.236”
Regrinding Limit: 10mm / 0.393”

$3,332

As low as $108.29/mo

View Details

Bison Lifting Equipment 2 Ton Manual 20 FT Lifting Chain Hoist with Premium Galvanized Chain CH20-20-G

2 Ton Lifting Capacity
20 Ft Standard lift
Premium Galvanized load Chain
Double-Pawl Load Brake

$554.86

As low as $18.03/mo

View Details

Jet 1-1/2-Ton Aluminum Hand Chain Hoist with 10ft of Lift | AL100-150-10 133121

Extra large hand chain opening for side chain pulling
Sealed housing to provide extra protection against the elements
Complies with ANSI/ASME B30.16 and HAST-2 Standards
Cast steel safety latches
Dual pawl Weston style brake

MSRP: ~~$752~~

$499

View Details

Jet 1/2-Ton Aluminum Hand Chain Hoist with 10ft of lift | AL100-050-10 133051

Extra large hand chain opening for side chain pulling
Sealed housing to provide extra protection against the elements
Complies with ANSI/ASME B30.16 and HAST-2 Standards
Cast steel safety latches
Dual pawl Weston style brake

MSRP: ~~$582~~

$411

View Details

Jet JLH-100WO-10 1 Ton Lever Hoist, 10' Lift with Overload Protection 376201

All steel construction
Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
Enhanced ergonomic grip allows for greater operator control and increased comfort
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates

MSRP: ~~$666~~

$460

View Details