Hoists & Cranes

  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $2,680
$1,712.58
As low as $55.65/mo

  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $630
$441

  • Chuck Size: 8” x 24”
  • Holding force: 90N/cm² / 130lbs/in²
  • Min Workpiece Size: 25mm x 25mm x 3mm / 1” x 1” x 0.12”
  • Regrinding limit: 6mm / 0.236”
MSRP: $4,934
$4,445
As low as $144.46/mo

  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $5,645
$3,603.99
As low as $117.12/mo

  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $944
$602
As low as $19.56/mo

  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $730
$493

  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $4,294
$2,741.99
As low as $89.11/mo

  • Chuck Size: 6” x 18”
  • Holding force: 90N/cm² / 130lbs/in²
  • Min Workpiece Size: 25mm x 25mm x 3mm / 1” x 1” x 0.12”
  • Regrinding limit: 6mm / 0.236”
MSRP: $2,839
$2,574
As low as $83.65/mo

  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $1,054
$675
As low as $21.93/mo

  • Chuck Dimensions: 8” x 24”
  • Holding Force: 100N/cm² / 145lbs/in²
  • Min Workpiece Size: 0.02” x 0.02” x 0.04”  
  • Regrinding Limit: 7mm / 0.275”
MSRP: $3,989
$3,417
As low as $111.05/mo

  • Chuck Diameter: 10”
  • Holding Force: 160N/cm² / 232lbs/in²
  • Min Workpiece Size: 40mm x 8mm / 1.57” x 0.314”
  • Regrinding Limit: 10mm / 0.393”
MSRP: $3,210
$2,905
As low as $94.41/mo

  • Chuck Dimensions: 8” x 24”
  • Holding Force: 160N/cm² / 232lbs/in²
  • Min Workpiece Size: 0.984” x 0.984” x 0.236”
  • Regrinding Limit: 10mm / 0.393”
$4,079
As low as $132.56/mo

  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
MSRP: $270
$186

  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $4,460
$2,844
As low as $92.43/mo

  • 1/2 Ton Lifting Capacity
  • 10 Ft Standard lift
  • Premium Galvanized load Chain
  • Double-Pawl Load Brake
$280.41

  • Chuck Dimensions: 6” x 14”
  • Holding Force: 100N/cm² / 145lbs/in²
  • Min Workpiece Size: 0.02” x 0.02” x 0.04”  
  • Regrinding Limit: 7mm / 0.275”
MSRP: $2,095
$1,739
As low as $56.51/mo

  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $5,794
$3,701.58
As low as $120.30/mo

  • 3 Ton Lifting Capacity
  • 20 Ft Standard lift
  • Premium Galvanized load Chain
  • Double-Pawl Load Brake
$709.04
As low as $23.04/mo

  • 10 Ton Lifting Capacity
  • 20 Ft Standard lift
  • Premium Galvanized load Chain
  • Double-Pawl Load Brake
$1,960.54
As low as $63.71/mo

  • Chuck Dimensions: 10” x 16”
  • Holding Force: 160N/cm² / 232lbs/in²
  • Min Workpiece Size: 0.984” x 0.984” x 0.236”
  • Regrinding Limit: 10mm / 0.393”
$3,608
As low as $117.26/mo

  • Double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch, or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $758
$508
As low as $16.51/mo

  • Chuck Size: 8” x 24”
  • Holding force: 110N/cm² / 159lbs/in²
  • Min. Workpiece Size: 25mm x 25mm x 3mm / 1" x 1" x .12"
  • Regrinding limit: 6 mm / .236"
MSRP: $5,682
$5,101
As low as $165.78/mo

  • Chuck Diameter: 12”
  • Holding Force: 160N/cm² / 232lbs/in²
  • Min Workpiece Size: 40mm x 8mm / 1.57” x 0.314”
  • Regrinding Limit: 10mm / 0.393”
MSRP: $4,033
$3,617
As low as $117.55/mo

  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • Hoist carries a dust and moisture rating of IP-55 and the wireless transmitter IP-65 which means hoist can stay in the light rain and pendant is dust and water proof.
MSRP: $5,656
$3,547.43
As low as $115.29/mo