By Category

Hoists & Cranes

Jet MT200-4, 2 Ton Two Speed Electric Trolley 3-Phase 460V 144187

Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
TAA Approved
Two speeds reduces bump firing to while still allowing high speed movement of materials
Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
Expanded flange capacity kits are available

MSRP: ~~$4,175.99~~

$2,375

As low as $77.18/mo

View Details

MPI 8”x24” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-200600-SGC

Chuck Size: 8” x 24”
Holding force: 110N/cm² / 159lbs/in²
Min. Workpiece Size: 25mm x 25mm x 3mm / 1" x 1" x .12"
Regrinding limit: 6 mm / .236"

MSRP: ~~$5,682~~

$5,101

As low as $165.78/mo

View Details

Norco 85/55 Ton Air/Hydraulic Floor Jack 72255

Lift Height Low: 8.6"
Lift Height High: 16.2"
Piston Stroke: 7.5"
P.S.I. Range: 150-175

MSRP: ~~$8,400~~

$4,575

As low as $148.68/mo

View Details

Jet 3-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-300WO-30 207130

Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist

MSRP: ~~$2,253.99~~

$1,349

As low as $43.84/mo

View Details

Jet JG-75, 3/4 Ton Grip Puller Without Cable 286575

A double sealed ratchet brake system increases safety on the jobsite
Available in 3/4, 1-1/2 and 3-Ton pulling capacities
Designed to lift, lower, stretch or pull heavy loads
Double Sealed Ratchet Brake System
Lightweight zinc coated steel is used to resist corrosion

MSRP: ~~$599.99~~

$435

View Details

Jet JLH-300-5PSH 3 Ton Lever Hoist, 5' Lift with Overload Protection & Shipyard Hooks 376900

All steel construction
Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
Enhanced ergonomic grip allows for greater operator control and increased comfort
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates

MSRP: ~~$1,333.99~~

$849

As low as $27.59/mo

View Details

Jet MT300, 3 Ton Two Speed Electric Trolley 3-Phase 230V 140189

Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
TAA Approved
Two speeds reduces bump firing to while still allowing high speed movement of materials
Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
Expanded flange capacity kits are available

MSRP: ~~$4,753.99~~

$2,695

As low as $87.58/mo

View Details

Jet 5-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-500WO-30 208130

Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist

MSRP: ~~$2,505.99~~

$1,475

As low as $47.93/mo

View Details

Jet 1-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-100-30 133130

Extra large hand chain opening for side chain pulling
Sealed housing to provide extra protection against the elements
Complies with ANSI/ASME B30.16 and HAST-2 Standards
Cast steel safety latches
Dual pawl Weston style brake

MSRP: ~~$1,000.99~~

$655

As low as $21.28/mo

View Details

MPI 6”x14” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-150350-REN

Chuck Dimensions: 6” x 14”
Holding Force: 100N/cm² / 145lbs/in²
Min Workpiece Size: 0.02” x 0.02” x 0.04”
Regrinding Limit: 7mm / 0.275”

MSRP: ~~$2,095~~

$1,739

As low as $56.51/mo

View Details

Jet 2SS-3C-10, 2-Ton Electric Chain Hoist 3-Phase 10' Lift 231000

All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling

MSRP: ~~$6,644.99~~

$3,815

As low as $123.98/mo

View Details

Jet 20-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-2000WO-10 102020

Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist

MSRP: ~~$8,607.99~~

$4,825

As low as $156.81/mo

View Details

Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS200-230-015 140094

The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
Two Speed Motor ensures the correct speed for the job with a click of a button
IP55 TEFC Motor with Class F insulation for working in harsh environments

MSRP: ~~$13,168.99~~

$7,345

As low as $238.71/mo

View Details

Jet 1/8-Ton Electric Chain Hoist 1-Phase 10' Lift | JSH-275-10 110100

Aluminum Housing- Aluminum alloy housing decreases the weight for convenient transportation
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Heat Treated Gears- Heat treated alloy steel geared drive train for long lasting durability
JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling

MSRP: ~~$3,159.99~~

$1,815

As low as $58.98/mo

View Details

Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS050-010 104022

Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
TAA Approved
Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
Overload protection using slip clutch system to protect hoist from loads over rated capacities
DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs

MSRP: ~~$7,336.99~~

$4,159

As low as $135.16/mo

View Details

Jet 5SS-1C-15, 5-Ton Electric Chain Hoist 1-Phase 15' Lift 511500

24 volt push button controller with cable strain relief system for durability and reliability
All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability

MSRP: ~~$11,195.99~~

$6,350

As low as $206.37/mo

View Details

Jet 1-Ton Electric Chain Hoist 1-Phase 10' Lift | 1SS-1C-10 111000

24 volt push button controller with cable strain relief system for durability and reliability
All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability

MSRP: ~~$6,283.99~~

$3,575

As low as $116.18/mo

View Details

Jet JLP-600A-20, 6 Ton Lever Hoist with 20' Lift 287603

Grade 80 black oxide coated load chain for added durability
Impact resistant all steel construction for added durability and protection
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Needle bearings support the load sheave to increase efficiency and promote smooth operation
JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load

MSRP: ~~$1,752.99~~

$1,085

As low as $35.26/mo

View Details

MPI 8”x16” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-200400-SGC

Chuck Size: 8” x 16”
Holding force: 110N/cm² / 159lbs/in²
Min. Workpiece Size: 25mm x 25mm x 3mm / 1" x 1" x .12"
Regrinding limit: 6 mm / .236"

MSRP: ~~$4,728~~

$4,288

As low as $139.36/mo

View Details

Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS100-460-015 144005

The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
Two Speed Motor ensures the correct speed for the job with a click of a button
IP55 TEFC Motor with Class F insulation for working in harsh environments

MSRP: ~~$8,972.99~~

$4,999

As low as $162.46/mo

View Details

Jet 1/8-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS018-020 104002

Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
TAA Approved
Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
Overload protection using slip clutch system to protect hoist from loads over rated capacities
Hoist carries a dust and moisture rating of IP-55 and the wireless transmitter IP-65 which means hoist can stay in the light rain and pendant is dust and water proof.

MSRP: ~~$6,137.99~~

$3,485

As low as $113.26/mo

View Details

Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS300-460-015 144011

The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
Two Speed Motor ensures the correct speed for the job with a click of a button
IP55 TEFC Motor with Class F insulation for working in harsh environments

MSRP: ~~$13,738.99~~

$7,635

As low as $248.13/mo

View Details

Jet JLP-150A-10, 1-1/2 Ton Lever Hoist with 10' Lift 287401

Grade 80 black oxide coated load chain for added durability
Impact resistant all steel construction for added durability and protection
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Needle bearings support the load sheave to increase efficiency and promote smooth operation
JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load

MSRP: ~~$595.99~~

$435

View Details

Jet JLH-150WO-15, 1-1/2 Ton, Lever Hoist with 15' Lift with Overload Protection 376302

All steel construction
Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
Enhanced ergonomic grip allows for greater operator control and increased comfort
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates

MSRP: ~~$919.99~~

$605

As low as $19.66/mo

View Details