By Category

Hoists & Cranes

  • Layout
Jet 20-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-2000WO-15 108015 at Elite Metal Tools
Jet 20-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-2000WO-15 108015
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $10,216.79
$5,779
As low as $187.81/mo
View Details
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS100-460-015 144005 at Elite Metal Tools
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS100-460-015 144005
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $9,870.29
$5,575
As low as $181.18/mo
View Details
Jet 1/2-Ton Hand Chain Hoist with 10' Lift | S90-050-10 101900 at Elite Metal Tools
Jet 1/2-Ton Hand Chain Hoist with 10' Lift | S90-050-10 101900
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $342.09
$247.50
View Details
MPI 8”x20” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-200500-REN at Elite Metal Tools
MPI 8”x20” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-200500-REN
  • Chuck Dimensions: 8” x 20”
  • Holding Force: 100N/cm² / 145lbs/in²
  • Min Workpiece Size: 0.02” x 0.02” x 0.04”  
  • Regrinding Limit: 7mm / 0.275”
MSRP: $3,713
$3,204
As low as $104.13/mo
View Details
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS500-230-010 140127 at Elite Metal Tools
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS500-230-010 140127
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $18,695.59
$10,539
As low as $342.51/mo
View Details
Jet 1-1/2-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-150-30 133124 at Elite Metal Tools
Jet 1-1/2-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-150-30 133124
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $1,407.99
$925
As low as $30.06/mo
View Details
Jet TS100-230-015,1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT100 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140237K at Elite Metal Tools
Jet TS100-230-015,1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT100 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140237K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $13,331.99
$7,583
As low as $246.44/mo
View Details
Jet 20-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-2000WO-30 108030 at Elite Metal Tools
Jet 20-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-2000WO-30 108030
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $14,638.79
$8,245
As low as $267.96/mo
View Details
Jet 1/8-Ton Electric Chain Hoist 1-Phase 10' Lift | JSH-275-10 110100 at Elite Metal Tools
Jet 1/8-Ton Electric Chain Hoist 1-Phase 10' Lift | JSH-275-10 110100
  • Aluminum Housing- Aluminum alloy housing decreases the weight for convenient transportation
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Heat Treated Gears- Heat treated alloy steel geared drive train for long lasting durability
  • JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $3,475.99
$2,055
As low as $66.78/mo
View Details
Jet JLP-300A-20, 3 Ton Lever Hoist with 20' Lift 287503 at Elite Metal Tools
Jet JLP-300A-20, 3 Ton Lever Hoist with 20' Lift 287503
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $1,066.99
$673
As low as $21.87/mo
View Details
Jet 1-Ton Electric Chain Hoist 1-Phase 15' Lift | 1SS-1C-15 111500 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 1-Phase 15' Lift | 1SS-1C-15 111500
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $7,127.99
$4,135
As low as $134.38/mo
View Details
MPI 8”x24” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-200600-REN at Elite Metal Tools
MPI 8”x24” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-200600-REN
  • Chuck Dimensions: 8” x 24”
  • Holding Force: 100N/cm² / 145lbs/in²
  • Min Workpiece Size: 0.02” x 0.02” x 0.04”  
  • Regrinding Limit: 7mm / 0.275”
MSRP: $3,989
$3,417
As low as $111.05/mo
View Details
Bison Lifting Equipment 1/2 Ton Manual 10 FT Lifting Chain Hoist with Premium Galvanized Chain CH05-10-G at Elite Metal Tools
Bison Lifting Equipment 1/2 Ton Manual 10 FT Lifting Chain Hoist with Premium Galvanized Chain CH05-10-G
  • 1/2 Ton Lifting Capacity
  • 10 Ft Standard lift
  • Premium Galvanized load Chain
  • Double-Pawl Load Brake
$280.41
View Details
Jet 3SS-3C-15, 3-Ton Electric Chain Hoist 3-Phase 15' Lift 331500 at Elite Metal Tools
Jet 3SS-3C-15, 3-Ton Electric Chain Hoist 3-Phase 15' Lift 331500
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $9,743.79
$5,509
As low as $179.04/mo
View Details
Jet MT100, 1- Ton Two Speed Electric Trolley 3-Phase 230V 140185 at Elite Metal Tools
Jet MT100, 1- Ton Two Speed Electric Trolley 3-Phase 230V 140185
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $4,162.39
$2,415
As low as $78.48/mo
View Details
Jet TS500-230-010,5-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT500 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140127K at Elite Metal Tools
Jet TS500-230-010,5-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT500 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140127K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $21,922.99
$12,374
As low as $402.15/mo
View Details
Jet 10-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-1000WO-30 209130 at Elite Metal Tools
Jet 10-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-1000WO-30 209130
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $6,826.59
$3,977
As low as $129.25/mo
View Details
Jet 1/4-Ton Electric Chain Hoist 1-Phase 10' Lift | JSH-550-10 110110 at Elite Metal Tools
Jet 1/4-Ton Electric Chain Hoist 1-Phase 10' Lift | JSH-550-10 110110
  • Aluminum Housing- Aluminum alloy housing decreases the weight for convenient transportation
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Heat Treated Gears- Heat treated alloy steel geared drive train for long lasting durability
  • JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $3,799.39
$2,225
As low as $72.31/mo
View Details
Norco 115V Single Phase Electro/Hydraulic Pump “Z” Series 910019B at Elite Metal Tools
Norco 115V Single Phase Electro/Hydraulic Pump “Z” Series 910019B
  • Usable Oil Capacity (Cu. In.): 462
  • Current Draw (Amps): 20
  • Thread Connection (NPT): 3/8”-18
  • Valve Type: Advance/Retract
MSRP: $8,436.92
$4,599
As low as $149.46/mo
View Details
MPI 8”x16” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-200400-SGC at Elite Metal Tools
MPI 8”x16” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-200400-SGC
  • Chuck Size: 8” x 16”
  • Holding force: 110N/cm² / 159lbs/in²
  • Min. Workpiece Size: 25mm x 25mm x 3mm / 1" x 1" x .12"
  • Regrinding limit: 6 mm / .236"
MSRP: $4,728
$4,288
As low as $139.36/mo
View Details
Jet TS500-230-015,5-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT500 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140128K at Elite Metal Tools
Jet TS500-230-015,5-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT500 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140128K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $22,970.19
$12,924
As low as $420.03/mo
View Details
Jet 20-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-2000WO-10 102020 at Elite Metal Tools
Jet 20-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-2000WO-10 102020
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $9,468.79
$5,395
As low as $175.33/mo
View Details
MPI 8”x18” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-200450-REN at Elite Metal Tools
MPI 8”x18” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-200450-REN
  • Chuck Dimensions: 8” x 18”
  • Holding Force: 100N/cm² / 145lbs/in²
  • Min Workpiece Size: 0.02” x 0.02” x 0.04”  
  • Regrinding Limit: 7mm / 0.275”
MSRP: $3,423
$2,966
As low as $96.39/mo
View Details
Jet 2-HDT, 2-Ton Manual Trolley 262020 at Elite Metal Tools
Jet 2-HDT, 2-Ton Manual Trolley 262020
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
  • Welded all-steel frame and powder coat finish provide maximum durability and protection
MSRP: $395.99
$269
View Details