Hoists & Cranes

  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $5,666
$3,618
As low as $117.58/mo
  • A double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $664
$455
  • 1 Ton Lifting Capacity
  • 20 Ft Standard lift
  • 30 Minute duty rating, H4 Classification
  • Pull-rotor motor brake
MSRP: $3,800
$3,420.25
As low as $111.15/mo
  • 3 Ton Lifting Capacity
  • 20 Ft Standard lift
  • 30 Minute duty rating, H4 Classification
  • Trolley Included
MSRP: $8,990
$8,090.47
As low as $262.94/mo
  • Workload Limit Flat Material: 3,968 lbs
  • Workload Limit Round Material: 2,425 lbs
  • Height up to Crane Hook: 24”
  • Base: 9.5” x 18.5”
MSRP: $9,993
$9,598
As low as $311.93/mo
  • Electromagnetic brake design is an industry-proven safety feature that secures the load even if power is interrupted to the hoist
  • Eliminates bump-firing when positioning the work piece reducing downtime and maintenance
  • Heavy-duty nylon chain bag with reinforcing metal brackets included
  • Industry proven Grade 80 black oxide coated load chain
  • JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
MSRP: $32,642
$20,809
As low as $411.81/mo
  • Workload Limit Flat Material: 2,976 lbs
  • Battery: 12V/35Ah
  • Base: 9.5” x 10.7”
  • Height up to Crane Hook: 18.1”
MSRP: $7,433
$7,036
As low as $228.67/mo
  • Voltage: 110V
  • Size: 11.02” x 10.47”
  • Depth of Magnetic Field: max 1.57” / 40mm
  • Power cord 10ft with plug
MSRP: $1,071
$1,032
As low as $33.54/mo
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $12,126
$7,606.16
As low as $247.20/mo
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $11,370
$7,132.99
As low as $231.82/mo
  • Usable Oil Capacity (Cu. In.): 462
  • Current Draw (Amps): 20
  • Thread Connection (NPT): 3/8”-18
  • Valve Type: Advance/Retract
MSRP: $7,442.05
$4,055
As low as $131.78/mo
  • Chuck Diameter: 6”
  • Holding Force: 140N/cm² / 203lbs/in²
  • Min Workpiece Size: 35mm / 1.377”
  • Regrinding Limit: 5mm / 0.2”
MSRP: $1,865
$1,632
As low as $53.04/mo
  • Cast steel safety latches are secured with Allen screws and lock nuts
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging
MSRP: $364
$237.66
  • Chuck Size: 12” x 24”
  • Holding force: 110N/cm² / 159lbs/in²
  • Min. Workpiece Size: 25mm x 25mm x 3mm / 1" x 1" x .12"
  • Regrinding limit: 6 mm / .236"
MSRP: $8,052
$7,248
As low as $235.56/mo
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $4,632
$2,953
As low as $95.97/mo
  • Workload Limit Flat Material: 4,400 lbs
  • Workload Limit Round Material: 2,200 lbs
  • Temperature Max: 80°C / 176°F
  • Diameter of Eye: .08”
MSRP: $4,450
$3,607
As low as $117.22/mo
  • 2 Ton Lifting Capacity
  • 20 Ft Standard lift
  • H4 Classification
  • Dual Lifting Speed
MSRP: $6,040
$5,436
As low as $176.67/mo
  • Chuck Diameter: 16”
  • Holding Force: 160N/cm² / 232lbs/in²
  • Min Workpiece Size: 40mm x 8mm / 1.57” x 0.314”
  • Regrinding Limit: 10mm / 0.393”
MSRP: $7,314
$6,535
As low as $212.38/mo
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $474
$300.90
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $904
$590.58
As low as $19.19/mo
  • 10 Ton Lifting Capacity
  • 10 Ft Standard lift
  • Premium Galvanized load Chain
  • Double-Pawl Load Brake
$1,800
As low as $58.50/mo
  • Chuck Size: 8” x 18”
  • Holding force: 110N/cm² / 159lbs/in²
  • Min. Workpiece Size: 25mm x 25mm x 3mm / 1" x 1" x .12"
  • Regrinding limit: 6 mm / .236"
MSRP: $4,842
$4,385
As low as $142.51/mo
  • Chuck Diameter: 14”
  • Holding Force: 140N/cm² / 203lbs/in²
  • Min Workpiece Size: 35mm / 1.377”
  • Regrinding Limit: 5mm / 0.2”
MSRP: $5,826
$5,254
As low as $170.75/mo
  • Chuck Size: 6” x 12”
  • Holding force: 90N/cm² / 130lbs/in²
  • Min Workpiece Size: 25mm x 25mm x 3mm / 1” x 1” x 0.12”
  • Regrinding limit: 6mm / 0.236”
MSRP: $2,211
$2,018
As low as $65.58/mo