By Category

Hoists & Cranes

  • Layout
Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS050-020 104024 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS050-020 104024
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $7,082.99
$4,025
As low as $130.81/mo
View Details
MPI 5” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-130-REN at Elite Metal Tools
MPI 5” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-130-REN
  • Chuck Diameter: 5”
  • Holding Force: 140N/cm² / 203lbs/in²
  • Min Workpiece Size: 35mm / 1.377”
  • Regrinding Limit: 5mm / 0.2”
MSRP: $1,850
$1,607
As low as $52.22/mo
View Details
Jet 1-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS100-010 104033 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS100-010 104033
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $12,271.99
$6,880
As low as $223.60/mo
View Details
MPI 3968lbs Flat Capacity 2425lbs Round Capacity Battery Lifting Magnet with 12V Battery and Remote Control BMP-3968 at Elite Metal Tools
MPI 3968lbs Flat Capacity 2425lbs Round Capacity Battery Lifting Magnet with 12V Battery and Remote Control BMP-3968
  • Workload Limit Flat Material: 3,968 lbs
  • Workload Limit Round Material: 2,425 lbs
  • Height up to Crane Hook: 24”
  • Base: 9.5” x 18.5”
MSRP: $9,993
$9,598
As low as $311.93/mo
View Details
MPI 6” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-150-REN at Elite Metal Tools
MPI 6” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-150-REN
  • Chuck Diameter: 6”
  • Holding Force: 140N/cm² / 203lbs/in²
  • Min Workpiece Size: 35mm / 1.377”
  • Regrinding Limit: 5mm / 0.2”
MSRP: $1,865
$1,632
As low as $53.04/mo
View Details
Jet 15-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-1500WO-30 109130 at Elite Metal Tools
Jet 15-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-1500WO-30 109130
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $9,457.99
$5,249
As low as $170.59/mo
View Details
Bison Lifting Equipment 1 Ton Three Phase Dual Speed Electric Lifting Chain Hoist HHBDSK01-01D at Elite Metal Tools
Bison Lifting Equipment 1 Ton Three Phase Dual Speed Electric Lifting Chain Hoist HHBDSK01-01D
  • 1 Ton Lifting Capacity
  • 20 Ft Standard lift
  • H4 Classification
  • Dual Lifting Speed
MSRP: $5,300
$4,769.84
As low as $155.01/mo
View Details
Steelmax MAX Lifter 660lbs Lifting Capacity Thin Gauge Lifting Magnets SM-ML-300-TG at Elite Metal Tools
Steelmax MAX Lifter 660lbs Lifting Capacity Thin Gauge Lifting Magnets SM-ML-300-TG
  • Max Plate Load: 660 lbs
  • Min Plate Thickness: 10mm 
  • Max Round Load: 264 lbs
  • Max Round Diameter: 11.4”
$2,620
As low as $85.15/mo
View Details
MPI 16” 160N Holding Force Rare Earth Round Permanent Magnetic Chuck MAX-400-REN at Elite Metal Tools
MPI 16” 160N Holding Force Rare Earth Round Permanent Magnetic Chuck MAX-400-REN
  • Chuck Diameter: 16”
  • Holding Force: 160N/cm² / 232lbs/in²
  • Min Workpiece Size: 40mm x 8mm / 1.57” x 0.314”
  • Regrinding Limit: 10mm / 0.393”
MSRP: $7,314
$6,535
As low as $212.38/mo
View Details
Bison Lifting Equipment 2 Ton Three Phase Dual Speed Electric Lifting Chain Hoist HHBDSK02-01D at Elite Metal Tools
Bison Lifting Equipment 2 Ton Three Phase Dual Speed Electric Lifting Chain Hoist HHBDSK02-01D
  • 2 Ton Lifting Capacity
  • 20 Ft Standard lift
  • H4 Classification
  • Dual Lifting Speed
MSRP: $6,040
$5,436
As low as $176.67/mo
View Details
Jet TS200-230-010, 2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT200 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140239K at Elite Metal Tools
Jet TS200-230-010, 2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT200 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140239K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $13,870.99
$7,699
As low as $250.21/mo
View Details
Jet JLP-050A-10, 1/2 Ton Mini-Puller, 10' Lift 287201 at Elite Metal Tools
Jet JLP-050A-10, 1/2 Ton Mini-Puller, 10' Lift 287201
  • Cast steel safety latches are secured with Allen screws and lock nuts
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging
MSRP: $386.99
$255
View Details
Jet 1-Ton Electric Chain Hoist 3-Phase 15' Lift | 1SS-3C-15 131500 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 3-Phase 15' Lift | 1SS-3C-15 131500
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $5,440.99
$3,140
As low as $102.05/mo
View Details
Jet MT300, 3 Ton Two Speed Electric Trolley 3-Phase 230V 140189 at Elite Metal Tools
Jet MT300, 3 Ton Two Speed Electric Trolley 3-Phase 230V 140189
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $4,753.99
$2,695
As low as $87.58/mo
View Details
Bison Lifting Equipment 10 Ton Manual 10 FT Lifting Chain Hoist with Premium Galvanized Chain CH100-10-G at Elite Metal Tools
Bison Lifting Equipment 10 Ton Manual 10 FT Lifting Chain Hoist with Premium Galvanized Chain CH100-10-G
  • 10 Ton Lifting Capacity
  • 10 Ft Standard lift
  • Premium Galvanized load Chain
  • Double-Pawl Load Brake
$1,800
As low as $58.50/mo
View Details
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS200-230-020 140240 at Elite Metal Tools
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS200-230-020 140240
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $12,647.99
$7,075
As low as $229.93/mo
View Details
MPI 230V 630W Capacity Electromagnet Control Unit with U19 Remote Control EMCU-630W at Elite Metal Tools
MPI 230V 630W Capacity Electromagnet Control Unit with U19 Remote Control EMCU-630W
  • Main AC Input Voltage: 230V
  • Watt Capacity: 630W
  • Output DC Voltage: 110Hz
  • Mains Frequency: 50/60Hz
MSRP: $1,956
$1,846
As low as $59.99/mo
View Details
MPI 12”x24” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-300600-SGC at Elite Metal Tools
MPI 12”x24” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-300600-SGC
  • Chuck Size: 12” x 24”
  • Holding force: 110N/cm² / 159lbs/in²
  • Min. Workpiece Size: 25mm x 25mm x 3mm / 1" x 1" x .12"
  • Regrinding limit: 6 mm / .236"
MSRP: $8,052
$7,248
As low as $235.56/mo
View Details
MPI 8”x18” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-200450-SGC at Elite Metal Tools
MPI 8”x18” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-200450-SGC
  • Chuck Size: 8” x 18”
  • Holding force: 110N/cm² / 159lbs/in²
  • Min. Workpiece Size: 25mm x 25mm x 3mm / 1" x 1" x .12"
  • Regrinding limit: 6 mm / .236"
MSRP: $4,842
$4,385
As low as $142.51/mo
View Details
MPI 14” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-350-REN at Elite Metal Tools
MPI 14” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-350-REN
  • Chuck Diameter: 14”
  • Holding Force: 140N/cm² / 203lbs/in²
  • Min Workpiece Size: 35mm / 1.377”
  • Regrinding Limit: 5mm / 0.2”
MSRP: $5,826
$5,254
As low as $170.75/mo
View Details
MPI 10”x20” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-250500-REN at Elite Metal Tools
MPI 10”x20” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-250500-REN
  • Chuck Dimensions: 10” x 20”
  • Holding Force: 100N/cm² / 145lbs/in²
  • Min Workpiece Size: 0.02” x 0.02” x 0.04”  
  • Regrinding Limit: 7mm / 0.275”
MSRP: $4,722
$4,032
As low as $131.04/mo
View Details
Jet 3SS-3C-20, 3-Ton Electric Chain Hoist 3-Phase 20' Lift 332000 at Elite Metal Tools
Jet 3SS-3C-20, 3-Ton Electric Chain Hoist 3-Phase 20' Lift 332000
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $9,028.99
$5,025
As low as $163.31/mo
View Details
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 15 'Lift | TS500-230-015 140128 at Elite Metal Tools
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 15 'Lift | TS500-230-015 140128
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $17,693.99
$9,799
As low as $318.46/mo
View Details
MPI 6”x18” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-150450-SGC at Elite Metal Tools
MPI 6”x18” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-150450-SGC
  • Chuck Size: 6” x 18”
  • Holding force: 110N/cm² / 159lbs/in²
  • Min. Workpiece Size: 25mm x 25mm x 3mm / 1" x 1" x .12"
  • Regrinding limit: 6 mm / .236"
MSRP: $3,946
$3,615
As low as $117.48/mo
View Details