By Category

Hoists & Cranes

  • Layout
Jet 1-1/2-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-150WO-10 101100 at Elite Metal Tools
Jet 1-1/2-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-150WO-10 101100
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $703
$472
View Details
MPI 18”x36” 84 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-480900-EP at Elite Metal Tools
MPI 18”x36” 84 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-480900-EP
  • Chuck Size: 18” x 36”
  • Holding force: 170 N/cm² / 246 lbs/cm²
  • Min. Workpiece Size: 50mm x 110mm x 20mm / 2” x 4.3” x 0.787”
  • Regrinding limit: 6mm / .236”
MSRP: $16,298
$15,369
As low as $304.15/mo
View Details
MPI Full Wave 4 Channel ElectroPermanent Chuck Control Unit with U19 Controller EPCU-40DW at Elite Metal Tools
MPI Full Wave 4 Channel ElectroPermanent Chuck Control Unit with U19 Controller EPCU-40DW
  • Main Operating Voltage: 200-460V
  • Main Operating Frequency: 50/60Hz
  • Operating Temperature: 32-122°F
  • Maximum Relative Humidity: 90%
MSRP: $9,555
$8,779
As low as $285.31/mo
View Details
MPI Dymax 10”x15” 120N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck D-250380-REN at Elite Metal Tools
MPI Dymax 10”x15” 120N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck D-250380-REN
  • Chuck Dimensions: 10” x 15”
  • Holding Force: 120N/cm² / 174lbs/in²
  • Min Workpiece Size: 0.393” x 0.393” x .196”
  • Regrinding Limit: 6mm / 0.236”
MSRP: $5,819
$4,688
As low as $152.36/mo
View Details
MPI Single Wave 2 Channel ElectroPermanent Chuck Control Unit with U19 Controller EPCU-20SW at Elite Metal Tools
MPI Single Wave 2 Channel ElectroPermanent Chuck Control Unit with U19 Controller EPCU-20SW
  • Main Operating Voltage: 200-460V
  • Main Operating Frequency: 50/60Hz
  • Operating Temperature: 32-122°F
  • Maximum Relative Humidity: 90%
MSRP: $4,564
$4,226
As low as $137.34/mo
View Details
Jet SkyHyker SKY25 25ft Material Jobsite Lift with 2,000 lb Lift Capacity JT1-595 at Elite Metal Tools
Jet SkyHyker SKY25 25ft Material Jobsite Lift with 2,000 lb Lift Capacity JT1-595
  • Min mast height in load position: 137”
  • Mast T-bar width: 35”
  • Base Dims: 60” x 60”
  • Caster size: 6” 
MSRP: $9,999.99
$7,999.99
As low as $259.99/mo
View Details