By Category

Hoists & Cranes

  • Layout
Jet 10-Ton Hand Chain Hoist with 15' Lift | S90-1000-15 101961 at Elite Metal Tools
Jet 10-Ton Hand Chain Hoist with 15' Lift | S90-1000-15 101961
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $3,094
$1,977.78
As low as $64.27/mo
View Details
Jet JLH-25-5, 1/4-Ton Compact Lever Hoist With 5' Lift 181205 at Elite Metal Tools
Jet JLH-25-5, 1/4-Ton Compact Lever Hoist With 5' Lift 181205
  • Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Cast steel safety latches
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
  • Heat Treated Load Plates
MSRP: $385
$251.99
View Details
MPI Full Wave 1 Channel ElectroPermanent Chuck Control Unit with U19 Controller EPCU-10DW at Elite Metal Tools
MPI Full Wave 1 Channel ElectroPermanent Chuck Control Unit with U19 Controller EPCU-10DW
  • Main Operating Voltage: 200-460V
  • Main Operating Frequency: 50/60Hz
  • Operating Temperature: 32-122°F
  • Maximum Relative Humidity: 90%
MSRP: $4,047
$3,747
As low as $121.77/mo
View Details
Jet JLH-900WO-5 9 Ton Lever Hoist, 5' Lift with Overload Protection 376700 at Elite Metal Tools
Jet JLH-900WO-5 9 Ton Lever Hoist, 5' Lift with Overload Protection 376700
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $3,263
$2,142.99
As low as $69.64/mo
View Details
Jet 15-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-1500WO-15 109115 at Elite Metal Tools
Jet 15-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-1500WO-15 109115
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $6,042
$3,854.58
As low as $125.27/mo
View Details
Jet 1/2-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-050-30 133054 at Elite Metal Tools
Jet 1/2-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-050-30 133054
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $812
$536
As low as $17.42/mo
View Details
Jet 1/2-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-50WO-30 205130 at Elite Metal Tools
Jet 1/2-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-50WO-30 205130
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $831
$545
As low as $17.71/mo
View Details
Jet TS200-230-015,2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT200 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140094K at Elite Metal Tools
Jet TS200-230-015,2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT200 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140094K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $13,956
$8,753
As low as $284.47/mo
View Details
Jet JLP-150A-20, 1-1/2 Ton Lever Hoist with 20' Lift 287403 at Elite Metal Tools
Jet JLP-150A-20, 1-1/2 Ton Lever Hoist with 20' Lift 287403
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $676
$465
View Details
MPI 16”x36” 72 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-420900-EP at Elite Metal Tools
MPI 16”x36” 72 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-420900-EP
  • Chuck Size: 16” x 36”
  • Holding force: 170 N/cm² / 246 lbs/cm²
  • Min. Workpiece Size: 50mm x 110mm x 20mm / 2” x 4.3” x 0.787”
  • Regrinding limit: 6mm / .236”
MSRP: $15,575
$14,675
As low as $476.93/mo
View Details
Jet 1/4-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-250WO-10 101200 at Elite Metal Tools
Jet 1/4-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-250WO-10 101200
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $483
$307.99
View Details
MPI 16”x24” 48 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-420600-EP at Elite Metal Tools
MPI 16”x24” 48 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-420600-EP
  • Chuck Size: 16” x 24”
  • Holding force: 170 N/cm² / 246 lbs/cm²
  • Min. Workpiece Size: 50mm x 110mm x 20mm / 2” x 4.3” x 0.787”
  • Regrinding limit: 6mm / .236”
MSRP: $10,375
$9,765
As low as $317.36/mo
View Details
MPI 16”x40” 72 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-420990-EP at Elite Metal Tools
MPI 16”x40” 72 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-420990-EP
  • Chuck Size: 16” x 40”
  • Holding force: 170 N/cm² / 246 lbs/cm²
  • Min. Workpiece Size: 50mm x 110mm x 20mm / 2” x 4.3” x 0.787”
  • Regrinding limit: 6mm / .236”
MSRP: $17,180
$16,170
As low as $320.00/mo
View Details
Jet JLH-300-10PSH 3 Ton Lever Hoist, 10' Lift with Overload Protection & Shipyard Hooks 376901 at Elite Metal Tools
Jet JLH-300-10PSH 3 Ton Lever Hoist, 10' Lift with Overload Protection & Shipyard Hooks 376901
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $1,320
$864.99
As low as $28.11/mo
View Details
Jet TS300-230-010,3-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT300 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140116K at Elite Metal Tools
Jet TS300-230-010,3-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT300 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140116K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $14,324
$8,984
As low as $291.98/mo
View Details
Jet JLP-300A-20SH, 3 Ton Lever Hoist, 20' Lift & Shipyard Hooks 287803 at Elite Metal Tools
Jet JLP-300A-20SH, 3 Ton Lever Hoist, 20' Lift & Shipyard Hooks 287803
  • All steel construction
  • Impact resistant all steel construction for added durability and protection
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
  • NEW! Redesigned ergonomic grip allows for greater operator control and increased comfort
MSRP: $958
$626.99
As low as $20.37/mo
View Details
Jet 1-1/2-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-150WO-20 201120 at Elite Metal Tools
Jet 1-1/2-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-150WO-20 201120
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $868
$553.86
As low as $18.00/mo
View Details
MPI 18”x40” 84 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-480990-EP at Elite Metal Tools
MPI 18”x40” 84 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-480990-EP
  • Chuck Size: 18” x 40”
  • Holding force: 170 N/cm² / 246 lbs/cm²
  • Min. Workpiece Size: 50mm x 110mm x 20mm / 2” x 4.3” x 0.787”
  • Regrinding limit: 6mm / .236”
MSRP: $17,007
$16,027
As low as $317.17/mo
View Details
Jet JLP-300A-15SH, 3 Ton Lever Hoist, 15' Lift & Shipyard Hooks 287802 at Elite Metal Tools
Jet JLP-300A-15SH, 3 Ton Lever Hoist, 15' Lift & Shipyard Hooks 287802
  • All steel construction
  • Impact resistant all steel construction for added durability and protection
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
  • NEW! Redesigned ergonomic grip allows for greater operator control and increased comfort
MSRP: $890
$582.99
As low as $18.94/mo
View Details
Jet JLH-300WO-15 3 Ton Lever Hoist, 15' Lift with Overload Protection 376502 at Elite Metal Tools
Jet JLH-300WO-15 3 Ton Lever Hoist, 15' Lift with Overload Protection 376502
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $1,356
$892.50
As low as $29.00/mo
View Details
Jet JLH-900WO-10 9 Ton Lever Hoist, 10' Lift with Overload Protection 376701 at Elite Metal Tools
Jet JLH-900WO-10 9 Ton Lever Hoist, 10' Lift with Overload Protection 376701
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $3,578
$2,350.99
As low as $76.40/mo
View Details
Jet 1-Ton Aluminum Hand Chain Hoist with 15ft of Lift | AL100-100-15 133115 at Elite Metal Tools
Jet 1-Ton Aluminum Hand Chain Hoist with 15ft of Lift | AL100-100-15 133115
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $675
$459
View Details
Jet JLH Series 3/4 Ton Lever Hoist, 15' Lift with Overload Protection 376102 at Elite Metal Tools
Jet JLH Series 3/4 Ton Lever Hoist, 15' Lift with Overload Protection 376102
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $696
$476
View Details
Jet JLH-600WO-5 6 Ton Lever Hoist, 5' Lift with Overload Protection 376600 at Elite Metal Tools
Jet JLH-600WO-5 6 Ton Lever Hoist, 5' Lift with Overload Protection 376600
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $1,958
$1,285.99
As low as $41.79/mo
View Details