By Category

Hoists & Cranes

  • Layout
Jet JLH-100WO-15 1 Ton Lever Hoist, 15' Lift with Overload Protection 376202 at Elite Metal Tools
Jet JLH-100WO-15 1 Ton Lever Hoist, 15' Lift with Overload Protection 376202
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $716
$486
View Details
MPI Dymax 12”x24” 120N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck D-300600-REN at Elite Metal Tools
MPI Dymax 12”x24” 120N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck D-300600-REN
  • Chuck Dimensions: 12” x 24”
  • Holding Force: 120N/cm² / 174lbs/in²
  • Min Workpiece Size: 0.393” x 0.393” x .196”
  • Regrinding Limit: 6mm / 0.236”
MSRP: $7,346
$5,911
As low as $192.10/mo
View Details
MPI 22”x24” 64 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-580600-EP at Elite Metal Tools
MPI 22”x24” 64 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-580600-EP
  • Chuck Size: 22” x 24”
  • Holding force: 170 N/cm² / 246 lbs/cm²
  • Min. Workpiece Size: 50mm x 110mm x 20mm / 2” x 4.3” x 0.787”
  • Regrinding limit: 6mm / .236”
MSRP: $13,530
$12,744
As low as $414.18/mo
View Details
Jet JLP-300A-5SH, 3 Ton Lever Hoist, 5' Lift & Shipyard Hooks 287800 at Elite Metal Tools
Jet JLP-300A-5SH, 3 Ton Lever Hoist, 5' Lift & Shipyard Hooks 287800
  • All steel construction
  • Impact resistant all steel construction for added durability and protection
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
  • NEW! Redesigned ergonomic grip allows for greater operator control and increased comfort
MSRP: $754
$499
View Details
Jet 1-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-100WO-15 203115 at Elite Metal Tools
Jet 1-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-100WO-15 203115
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $642
$449
View Details
Jet 20-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-2000WO-20 102000 at Elite Metal Tools
Jet 20-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-2000WO-20 102000
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $10,623
$6,774.99
As low as $220.18/mo
View Details
Jet 10-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-1000WO-20 209120 at Elite Metal Tools
Jet 10-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-1000WO-20 209120
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $5,085
$3,245.99
As low as $105.49/mo
View Details
Jet JLP-150A-5, 1-1/2 Ton Lever Hoist with 5' Lift 287400 at Elite Metal Tools
Jet JLP-150A-5, 1-1/2 Ton Lever Hoist with 5' Lift 287400
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $538
$393
View Details
MPI 12”x36” 48 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-300900-EP at Elite Metal Tools
MPI 12”x36” 48 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-300900-EP
  • Chuck Size: 12” x 36”
  • Holding force: 170 N/cm² / 246 lbs/cm²
  • Min. Workpiece Size: 50mm x 110mm x 20mm / 2” x 4.3” x 0.787”
  • Regrinding limit: 6mm / .236”
MSRP: $9,345
$8,868
As low as $288.21/mo
View Details
Jet JLH-100WO-20 1 Ton Lever Hoist, 20' Lift with Overload Protection 376203 at Elite Metal Tools
Jet JLH-100WO-20 1 Ton Lever Hoist, 20' Lift with Overload Protection 376203
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $770
$514
As low as $16.70/mo
View Details
MPI Single Wave 1 Channel ElectroPermanent Chuck Control Unit with U19 Controller EPCU-10SW at Elite Metal Tools
MPI Single Wave 1 Channel ElectroPermanent Chuck Control Unit with U19 Controller EPCU-10SW
  • Main Operating Voltage: 200-460V
  • Main Operating Frequency: 50/60Hz
  • Operating Temperature: 32-122°F
  • Maximum Relative Humidity: 90%
MSRP: $2,854
$2,659
As low as $86.41/mo
View Details
Jet JLH-25-15, 1/4-Ton Compact Lever Hoist With 15' Lift 181215 at Elite Metal Tools
Jet JLH-25-15, 1/4-Ton Compact Lever Hoist With 15' Lift 181215
  • Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Cast steel safety latches
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
  • Heat Treated Load Plates
MSRP: $472
$308.04
View Details
MPI Single Wave 4 Channel ElectroPermanent Chuck Control Unit with U19 Controller EPCU-40SW at Elite Metal Tools
MPI Single Wave 4 Channel ElectroPermanent Chuck Control Unit with U19 Controller EPCU-40SW
  • Main Operating Voltage: 200-460V
  • Main Operating Frequency: 50/60Hz
  • Operating Temperature: 32-122°F
  • Maximum Relative Humidity: 90%
MSRP: $7,827
$7,222
As low as $234.71/mo
View Details
Jet 1-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-100WO-30 203130 at Elite Metal Tools
Jet 1-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-100WO-30 203130
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $868
$559
As low as $18.16/mo
View Details
MPI 12”x20” 24 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-300490-EP at Elite Metal Tools
MPI 12”x20” 24 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-300490-EP
  • Chuck Size: 12” x 20”
  • Holding force: 170 N/cm² / 246 lbs/cm²
  • Min. Workpiece Size: 50mm x 110mm x 20mm / 2” x 4.3” x 0.787”
  • Regrinding limit: 6mm / .236”
MSRP: $7,033
$6,664
As low as $216.58/mo
View Details
Jet 1/2-Ton Hand Chain Hoist with 20' Lift | S90-050-20 101902 at Elite Metal Tools
Jet 1/2-Ton Hand Chain Hoist with 20' Lift | S90-050-20 101902
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $394
$250.92
View Details
Jet TS200-460-015,2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT200-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144008K at Elite Metal Tools
Jet TS200-460-015,2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT200-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144008K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $13,956
$8,753
As low as $284.47/mo
View Details
Jet 1/8-Ton Electric Chain Hoist 1-Phase 20' Lift | JSH-275-20 110120 at Elite Metal Tools
Jet 1/8-Ton Electric Chain Hoist 1-Phase 20' Lift | JSH-275-20 110120
  • Aluminum Housing- Aluminum alloy housing decreases the weight for convenient transportation
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Heat Treated Gears- Heat treated alloy steel geared drive train for long lasting durability
  • JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $3,162
$2,015
As low as $65.48/mo
View Details
Jet TS500-230-020,5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT500 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140129K at Elite Metal Tools
Jet TS500-230-020,5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT500 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140129K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $19,344
$12,131
As low as $394.25/mo
View Details
Jet JLH-300-20PSH 3 Ton Lever Hoist, 20' Lift with Overload Protection & Shipyard Hooks 376903 at Elite Metal Tools
Jet JLH-300-20PSH 3 Ton Lever Hoist, 20' Lift with Overload Protection & Shipyard Hooks 376903
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $1,536
$1,004.99
As low as $32.66/mo
View Details
MPI 22”x40” 96 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-580990-EP at Elite Metal Tools
MPI 22”x40” 96 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-580990-EP
  • Chuck Size: 22” x 40”
  • Holding force: 170 N/cm² / 246 lbs/cm²
  • Min. Workpiece Size: 50mm x 110mm x 20mm / 2” x 4.3” x 0.787”
  • Regrinding limit: 6mm / .236”
MSRP: $18,343
$17,242
As low as $341.21/mo
View Details
Jet JLH-600WO-15 6 Ton Lever Hoist, 15' Lift with Overload Protection 376602 at Elite Metal Tools
Jet JLH-600WO-15 6 Ton Lever Hoist, 15' Lift with Overload Protection 376602
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $2,250
$1,473.99
As low as $47.90/mo
View Details
MPI 22”x36” 96 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-580900-EP at Elite Metal Tools
MPI 22”x36” 96 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-580900-EP
  • Chuck Size: 22” x 36”
  • Holding force: 170 N/cm² / 246 lbs/cm²
  • Min. Workpiece Size: 50mm x 110mm x 20mm / 2” x 4.3” x 0.787”
  • Regrinding limit: 6mm / .236”
MSRP: $17,368
$16,356
As low as $323.68/mo
View Details
Jet 1/2-Ton Aluminum Hand Chain Hoist with 15ft of Lift | AL100-050-15 133052 at Elite Metal Tools
Jet 1/2-Ton Aluminum Hand Chain Hoist with 15ft of Lift | AL100-050-15 133052
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $640
$449
View Details