By Category

Hoists & Cranes

Jet TS300-230-015,3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT300 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140117K

The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
Two Speed Motor ensures the correct speed for the job with a click of a button
IP55 TEFC Motor with Class F insulation for working in harsh environments
5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads

MSRP: ~~$15,279~~

$9,582.99

As low as $311.44/mo

View Details

MPI Full Wave 2 Channel ElectroPermanent Chuck Control Unit with U19 Controller EPCU-20DW

Main Operating Voltage: 200-460V
Main Operating Frequency: 50/60Hz
Operating Temperature: 32-122°F
Maximum Relative Humidity: 90%

MSRP: ~~$5,367~~

$4,945

As low as $160.71/mo

View Details

Jet 1-1/2-Ton Hand Chain Hoist with 30' Lift | S90-150-30 101923

Grade 80 black oxide coated load chain for added durability
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
Needle bearings support the load sheave to increase efficiency and promote smooth operation

MSRP: ~~$744~~

$495

View Details

Jet TS200-460-020,2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT200-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 144009K

The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
Two Speed Motor ensures the correct speed for the job with a click of a button
IP55 TEFC Motor with Class F insulation for working in harsh environments

MSRP: ~~$14,446~~

$9,060

As low as $294.45/mo

View Details

Jet JLH Series 3/4 Ton Lever Hoist, 20' Lift with Overload Protection 376103

All steel construction
Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
Enhanced ergonomic grip allows for greater operator control and increased comfort
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates

MSRP: ~~$736~~

$496

View Details

Jet JLP-075A-20, 3/4 Ton Lever Hoist with 20' Lift 287303

Grade 80 black oxide coated load chain for added durability
Impact resistant all steel construction for added durability and protection
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
NEW! Redesigned ergonomic grip allows for greater operator control and increased comfort

MSRP: ~~$524~~

$343.74

View Details

Jet JLP-300A-5, 3 Ton Lever Hoist with 5' Lift 287500

Grade 80 black oxide coated load chain for added durability
Impact resistant all steel construction for added durability and protection
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Needle bearings support the load sheave to increase efficiency and promote smooth operation
JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load

MSRP: ~~$740~~

$495

View Details

Jet TS100-230-020,1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT100 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140238K

The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
Two Speed Motor ensures the correct speed for the job with a click of a button
IP55 TEFC Motor with Class F insulation for working in harsh environments

MSRP: ~~$11,264~~

$7,064

As low as $229.58/mo

View Details

Jet TS300-230-020,3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT300 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140118K

The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
Two Speed Motor ensures the correct speed for the job with a click of a button
IP55 TEFC Motor with Class F insulation for working in harsh environments
5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads

MSRP: ~~$15,180~~

$9,521

As low as $309.43/mo

View Details

Jet 15-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-1500WO-10 109110

Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist

MSRP: ~~$5,256~~

$3,354.78

As low as $109.03/mo

View Details

Jet TS300-460-015,3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT300-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144011K

The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
Two Speed Motor ensures the correct speed for the job with a click of a button
IP55 TEFC Motor with Class F insulation for working in harsh environments
5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads

MSRP: ~~$14,692~~

$9,214

As low as $299.45/mo

View Details

Jet JLP-600A-10, 6 Ton Lever Hoist with 10' Lift 287601

Grade 80 black oxide coated load chain for added durability
Impact resistant all steel construction for added durability and protection
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Needle bearings support the load sheave to increase efficiency and promote smooth operation
JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load

MSRP: ~~$1,403~~

$917.99

As low as $29.83/mo

View Details

Jet JLH-50-15, 1/2-Ton Compact Lever Hoist With 15' Lift 181515

Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
Cast steel safety latches
Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
Heat Treated Load Plates

MSRP: ~~$500~~

$326.40

View Details

Jet 1/8-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS018-010 104000

Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
TAA Approved
Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
Overload protection using slip clutch system to protect hoist from loads over rated capacities
Hoist carries a dust and moisture rating of IP-55 and the wireless transmitter IP-65 which means hoist can stay in the light rain and pendant is dust and water proof.

MSRP: ~~$5,516~~

$3,459.68

As low as $112.43/mo

View Details

Jet 2-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-200-30 133230

Extra large hand chain opening for side chain pulling
Sealed housing to provide extra protection against the elements
Complies with ANSI/ASME B30.16 and HAST-2 Standards
Cast steel safety latches
Dual pawl Weston style brake

MSRP: ~~$1,420~~

$908

As low as $29.51/mo

View Details

MPI 8”x20” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-200500-SGC

Chuck Size: 8” x 20”
Holding force: 110N/cm² / 159lbs/in²
Min. Workpiece Size: 25mm x 25mm x 3mm / 1" x 1" x .12"
Regrinding limit: 6 mm / .236"

MSRP: ~~$4,959~~

$4,478

As low as $145.53/mo

View Details

Jet 1/2-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-50WO-15 205115

Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist

MSRP: ~~$609~~

$427

View Details

Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS050-230-010 140233

The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
Two Speed Motor ensures the correct speed for the job with a click of a button
IP55 TEFC Motor with Class F insulation for working in harsh environments

MSRP: ~~$6,694~~

$4,197.99

As low as $136.43/mo

View Details

Jet JLP-075A-10, 3/4 Ton Lever Hoist, 10' Lift 287301

Grade 80 black oxide coated load chain for added durability
Impact resistant all steel construction for added durability and protection
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Needle bearings support the load sheave to increase efficiency and promote smooth operation
JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load

MSRP: ~~$466~~

$304.98

View Details

Jet JLP-150A-5SH, 1-1/2 Ton Lever Hoist, 5' Lift & Shipyard Hooks 287700

All steel construction
Impact resistant all steel construction for added durability and protection
Needle bearings support the load sheave to increase efficiency and promote smooth operation
JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
NEW! Redesigned ergonomic grip allows for greater operator control and increased comfort

MSRP: ~~$548~~

$399

View Details

Jet JLH-150-20PSH 1-1/2 Ton Lever Hoist, 20' Lift with Overload Protection & Shipyard Hooks 376803

All steel construction
Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
Enhanced ergonomic grip allows for greater operator control and increased comfort
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates

MSRP: ~~$960~~

$626.99

As low as $20.37/mo

View Details

Jet 1/4-Ton Electric Chain Hoist 1-Phase 20' Lift | JSH-550-20 110520

Aluminum Housing- Aluminum alloy housing decreases the weight for convenient transportation
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Heat Treated Gears- Heat treated alloy steel geared drive train for long lasting durability
JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling

MSRP: ~~$3,476~~

$2,224.99

As low as $72.31/mo

View Details

Jet 1/4-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-250WO-20 101250

Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist

MSRP: ~~$597~~

$418

View Details

Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS100-230-010 140236

The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
Two Speed Motor ensures the correct speed for the job with a click of a button
IP55 TEFC Motor with Class F insulation for working in harsh environments

MSRP: ~~$8,564~~

$5,372.99

As low as $174.62/mo

View Details