Searching thousands of products...

  • 270,000 btu/h cooling capacity
  • Runs on 460V 80-amp 3PH circuit
  • Variable frequency drive airflow control
  • Fork lift skid access for easy movement, setup, and transport
$65,995.00
$49,496.25

  • 60,000 btu/h cooling capacity
  • 41,600 btu/h heating capacity
  • Runs on 230V 60-amp 1PH circuit
  • Variable frequency drive airflow control
$22,995.00
$17,246.25

  • 60,000 btu/h cooling capacity
  • 41,600 btu/h heating capacity
  • Runs on 460V 20-amp 3PH circuit
  • Variable frequency drive airflow control
$22,995.00
$17,246.25

  • 13,850 BTU cooling capacity (Nominal 1.1-Ton)
  • 17,010 BTU heating capacity (Nominal 1.5-Ton)
  • Runs on 115V 15-amp 1PH circuit
  • Operates down to a 45 degree F. ambient environment
$5,850.00
$4,387.50

  • 17,700 BTU cooling capacity (Nominal 1.5-Ton)
  • 21,240 BTU heating capacity (Nominal 1.8-Ton)
  • Runs on 115V 20-amp 1PH circuit
  • Operates down to a 45 degree F. ambient environment
$6,695.00
$5,021.25

  • 60,000 btu/h cooling capacity
  • 41,600 btu/h heating capacity
  • Runs on 230V 40-amp 3PH circuit
  • Variable frequency drive airflow control
$22,995.00
$17,246.25

  • 135,000 btu/h cooling capacity
  • 83,300 btu/h heating capacity
  • Runs on 230V 80-amp 3PH circuit
  • Variable frequency drive airflow control
$39,995.00
$29,996.25

  • 135,000 btu/h cooling capacity
  • 83,300 btu/h heating capacity
  • Runs on 460V 40-amp 3PH circuit
  • Variable frequency drive airflow control
$39,995.00
$29,996.25

  • 270,000 btu/h cooling capacity
  • 166,600 btu/h heating capacity
  • Runs on 460V 80-amp 3PH circuit
  • Variable frequency drive airflow control
$66,995.00
$50,246.25

  • Threaded rod end easily accomodates tooling or nose piece.
  • Dual palm push buttons
  • Easily adjusted ram speed, pressure, and stroke control.
  • Air filter/regulator combination assembly - gives clean and continuous air flow to press.

  • Easily adjusted ram speed, pressure, and stroke control.
  • Ram has a threaded rod end making it easy to attach tooling or nose piece.
  • Dual palm push buttons for safe operation.
  • Air filter/regulator combination assembly ensures clean and continous air flow to press.

  • 270,000 btu/h cooling capacity
  • 166,600 btu/h heating capacity
  • Runs on 460V 80-amp 3PH circuit
  • Variable frequency drive airflow control
$65,995.00
$54,746.25

  • 331/2" Width between uprights
  • 10" Ram Travel
  • Horizontal workhead travel
  • 36" Maximum ram to table

  • Adjustable Table permits easy vertical movement by means of self-locking hoist
  • Dual Air Pumps for faster pressing speeds
  • Moveable workhead for off-center positioning
  • Rapid ram approach

  • Two (2) 8” x 21” flexible chutes
  • Air housing with 8” duct collars and clamps
  • Necessary hardware to install the KDC to the unit
$375.00
$319.00

  • Dual Air Pumps for faster pressing speeds
  • 44" Width between uprights
  • 36" Maximum ram to table
  • Moveable workhead for off-center positioning

  • Dual Pump for faster pressing speeds
  • 48" Width between uprights
  • Moveable workhead for off-center positioning
  • 30" Maximum ram to table

  • 150 Ton capacity for handling large tires 
  • upper movable head channel provides 15" of travel for easy set-up
  • Large 7-3/4" ram provides platen stability and longer seal life 
  • Easily removable pins allow head channel to be set in four different positions

  • Automatic air quality sensor adjusts the six speeds based on air quality.
  • Captures particles down to 1 micron.
  • Timer can be set up to 16 hours.
  • Bright, clear, LED display panel is angled for easier viewing when ceiling mounted.
  • Two-Filter system with air Diffuser disperses air into a broader pattern.

  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
$25,577.43
$20,819.00