Searching thousands of products...

• 41/4" Capacity
• Pneumatic centering vise, hydraulic blade descent
• Automatic shut-off and vise release
• 220V, 3PH

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

• Fast, Foot-Operated Chain Vise 
• 16"-18" Diameter Abrasive Wheel (not included) 
• 1" Wheel Arbor 
• Sealed Ball Bearings 

• 100" made in the USA
• Heavy-duty cast iron base and trunnion
• Cam lock vise
• Capacities: 1.5" solids, 2.5" pipe

• 30HP Motor 
• Cam Vise - 4-1/2" High 
• 1" Arbor 
• Spindle Speed 1800 RPM 

• OSHA safety clamshell wheel guard
• 1" spindle, sealed ball bearings
• Two easy-set screw vises to hold work on both sides
• Options: #12L steel stand and AV-18 air vises

• Maximum Vice Opening: 120mm (4.70")
• The NEW 350-S can run at 2 different speeds: 40-80 R.P.M.
• The NEW 350-S is to be equipped with a 350mm (14") Blade.
• Electrical: The NEW 350-S can be brought in at either 220 Volt / 3 Phase / 60Hz or 480 Volt / 3 Phase / 60Hz.

• 12"-14" 
• Dual Moveable 4" Screw Vises 
• Semi-Automatic, Air/Oil Power Down Feed 0-12FPM
• Dual Coolant Nozzels 

• Spindle RPM 2500
• Rugged Cast Iron Arm And Trunnion 
• 0-45 Degree Left or Right
• 3" Sraight Solid 

• Capacity: 1 .5″ solids, 2 1/2″ pipe
• 5/8″ arbor, sealed-for-life bearings,10″ abrasive wheel, 3 HP
• Available in 1 ph 110/220 or 3 ph 220/440
• Swivel cam vise opens 4″ – fast, lever-lock. Work length stop

• Maximum vice opening: 100mm (3.9")
• The NEW 250 DV is to be equipped with a 250mm blade.
• The NEW 250 DV can run at 2 different speeds: 40-80 R.P.M.
• Solid Round Cutting at 90 Degrees - 1.50"

• Maximum vice opening: 120mm (4.7")
• The NEW 300 EDV is to be equipped with a 300mm blade.
• The NEW 300 EDV can run at 2 different speeds: 40-80 R.P.M.
• Solid Round Cutting at 90 Degrees - 2.0"

• Maximum vice opening: 185mm (7.25")
• The NTM 350-S can run at 2 different speeds: 33-66 R.P.M.
• Square Tube Cutting at 90° (Straight Cut) - 3.75"
• Square Tube Cutting at 45° Right - 3.50"

• Maximum Vice Opening: 185mm (7.25")
• The NTA 370 is to be equipped with a 370mm (14.5") Blade.
• NTA 370 can run at 2 different speeds: 25-50 R.P.M. (Unless Equipped with Variable Speed Inverter)
• Electrical: The NTA 370 can be brought in at either 220 Volt / 3 Phase / 60Hz or 480 Volt / 3 Phase / 60Hz.

• Miters left and right 
• Centering vise 
• Cuts non-ferrous metals 
• Blade turns at 3200 rpm

• Blade diameter: 8"
• Motor rating: 1.75 h.p. 110v, 15 amp
• Blade speed: 2.800 r.p.m.
• Max. cutting depth: 2 ¾"

• 14" Blade, 1" Arbor, 5HP 
• Mitres Either Direction 45 Degrees 
• Spindle RPM 4400 
• Heavy Duty Stand 

• Manual Operation 
• Dual 3" Vises 
• Internal Lite 
• Magnetic Switch 

• 14" Blade, 1" Arbor, 5HP 
• Mitres Either Direction 45 Degrees 
• Spindle RPM 4400 
• Heavy Duty Stand 

• Mitres left and right to 45 deg.
• Good for cutting aluminum and other non-ferrous material with steel blade
• Double air vises
• OHSA saferty blade guard

• 5HP Motor
• U.S.A Made
• 2200 RPM at Spindle
• 1" Spindle Arbor

• 20" Abrasive Wheel
• 1" Spindle w/ Sealed Ball Bearings
• 2500 RPM at Spindle
• Made in the U.S.A

• 20" Radial Abrasive Saw
• 2500 RPM at Spindle
• Foot Operated Chain Vise
• 1" Spindle Arbor

• 26" Wet Abrasive Chop Saw
• 1800 Spindle RPM
• 3Phase 220Volt or 440Volt
• 2HP