Searching thousands of products...

• Max Blade Diameter: 14.5"
• Infinitely Variable: 13-76 
• Capacity Round at 90 Deg: 4"
• Capacity Square at 90 Deg: 4"

• 230v/460v/60/3 Electricals
• Self-Centering Vise with Angle Scale
• Flood Coolant System
• Two (2) Year Limited Warranty

• Max Blade Diameter: 14.5"
• Spindle RPM: 18 & 36
• Capacity Round at 90 Deg: 4" 
• Capacity Square at 90 Deg: 4"

• Max Blade Diameter: 12.5"
• Spindle Diameter: 40 mm
• Capacity Round at 90 Deg: 4"
• Capacity Square at 90 Deg: 3.25"

• Blade Size: 10”
• Blade Speed: 6000 rpm
• Cutting Depth: 3.25”
• Engine: Kohler 7hp

• Max. Blade Diameter: 18”
• Max. Blade Shaft Speed: 2600 rpm
• Max. Cutting Depth (18” [457mm] Blade): 6 5/8”
• Engine: Honda GX390

• Max Vise Opening: 8"
• Blade Size: 14"
• Round at 90 Deg: 4.75"
• Square at 90 Deg: 4.5"

• 11" Blade
• Semi-Automatic operation - manual feed also available
• Self centering vice
• 2.75" Tube Capacity 

• 41/4" Capacity
• Pneumatic centering vise, hydraulic blade descent
• Automatic shut-off and vise release
• 220V, 3PH

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

• Maximum Vice Opening: 120mm (4.70")
• The NEW 350-S can run at 2 different speeds: 40-80 R.P.M.
• The NEW 350-S is to be equipped with a 350mm (14") Blade.
• Electrical: The NEW 350-S can be brought in at either 220 Volt / 3 Phase / 60Hz or 480 Volt / 3 Phase / 60Hz.

• Maximum vice opening: 185mm (7.25")
• The NTM 350-S can run at 2 different speeds: 33-66 R.P.M.
• Square Tube Cutting at 90° (Straight Cut) - 3.75"
• Square Tube Cutting at 45° Right - 3.50"

• Miters left and right 
• Centering vise 
• Cuts non-ferrous metals 
• Blade turns at 3200 rpm

• Blade diameter: 8"
• Motor rating: 1.75 h.p. 110v, 15 amp
• Blade speed: 2.800 r.p.m.
• Max. cutting depth: 2 ¾"

• Maximum vice opening: 180mm (7")
• The NTS 370 can run at 2 different speeds: 25-50 R.P.M.
• Square Tube Cutting at 90° (Straight Cut) - 4.50"
• Square Tube Cutting at 45° - 3.75"

• Blade diameter 14"
• Max. cutting length - includes the plunge 48"
• Motor speed 2,800
• Cutting table dimensions 55" x 27.5"

• Blade Diameter: 30”
• Blade Shaft Diameter: 1”
• Max. Cutting Length – Includes the Plunge: 18 / 27”
• Blade Speed: 1700 rpm

• Blade diameter: 14"
• Max. cutting length (w/plunge cut): 26" (30")
• Cutting table dimensions: 20” x 16”
• Motor speed: 2,850 r.p.m.

• Main motor rating: ½ HP
• Air supply: 87 psi
• Speed: 38, 19 rpm
• Width of vise: 6”

• Maximum Saw Blade Size Ø: 10"
• Nominal Current: 4.7 A
• Power: 2.5 HP
• Motor Power: 1.75 – 2.5 HP

• Maximum Saw Blade Size Ø: 12”
• Nominal Current: 5.58 A
• Power: 3 HP
• Motor Power:2.4 – 3 HP

• Blade diameter / Blade shaft diameter: 30” / 1”
• Max cutting length (w/plunge): 12"
• Blade speed: 1700 r.p.m.
• Water pan capacity: 9 gal.

• Blade diameter  10"
• Blade shaft diameter  5/8"
• Blade speed  2.800 r.p.m
• Max. cutting depth  3 ¾" 

• Maximum Diameter Blade: 275 mm
• Motor: 60 RPM, 220 Volt, 1 Phase
• Semi-Automatic Cycle
• Made in the USA with a 3-year parts warranty