Searching thousands of products...

• 41/4" Capacity
• Pneumatic centering vise, hydraulic blade descent
• Automatic shut-off and vise release
• 220V, 3PH

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

• 220 V 3 PH
• 7.5 HP
• Table Saw Arbor 1"
• RPM 3000/4000/5000

• Attaches quickly and securely into place
• Included Equipment: Material hold down, Extra Lower Blade Holder, Onboard Dust Blower
• Large 11-5/8” x 21”, 1/4” thick steel table provides a stable working surface while also limiting vibration
• Removable dust port on underside of table to collect dust at the source
• Slotted table for easier and quicker blade changes

• 220V 1 PH
• Table Saw 3850
• Table Size 20"
• Blade Diameter 10"

• 12" Blade
• 3600 RPM
• Maximum rip cut (right) 52"
• 220V, 1PH

• Maximum Vice Opening: 120mm (4.70")
• The NEW 350-S can run at 2 different speeds: 40-80 R.P.M.
• The NEW 350-S is to be equipped with a 350mm (14") Blade.
• Electrical: The NEW 350-S can be brought in at either 220 Volt / 3 Phase / 60Hz or 480 Volt / 3 Phase / 60Hz.

3 HP
4300 RPM
220 V 1PH
5/8" Saw Harbo

• 220V, 1PH Motor
• 4300 RPM
• 3HP
• 10" Blade

• Adjustable Material Stop
• Automatic blade shut off switch stops the sawing process
• Built-in, self-propelled chip brush prevents chip build up in blade guides
• Dual mitering allows for compound angle cutting of 60° right and 45° left
• Heavy-duty construction reduces vibration and deflection

• Maximum vice opening: 100mm (3.9")
• The NEW 250 DV is to be equipped with a 250mm blade.
• The NEW 250 DV can run at 2 different speeds: 40-80 R.P.M.
• Solid Round Cutting at 90 Degrees - 1.50"

• Maximum vice opening: 120mm (4.7")
• The NEW 300 EDV is to be equipped with a 300mm blade.
• The NEW 300 EDV can run at 2 different speeds: 40-80 R.P.M.
• Solid Round Cutting at 90 Degrees - 2.0"

• Maximum vice opening: 185mm (7.25")
• The NTM 350-S can run at 2 different speeds: 33-66 R.P.M.
• Square Tube Cutting at 90° (Straight Cut) - 3.75"
• Square Tube Cutting at 45° Right - 3.50"

• Maximum Vice Opening: 185mm (7.25")
• The NTA 370 is to be equipped with a 370mm (14.5") Blade.
• NTA 370 can run at 2 different speeds: 25-50 R.P.M. (Unless Equipped with Variable Speed Inverter)
• Electrical: The NTA 370 can be brought in at either 220 Volt / 3 Phase / 60Hz or 480 Volt / 3 Phase / 60Hz.

• Miters left and right 
• Centering vise 
• Cuts non-ferrous metals 
• Blade turns at 3200 rpm

• Maximum vice opening: 180mm (7")
• The NTS 370 can run at 2 different speeds: 25-50 R.P.M.
• Square Tube Cutting at 90° (Straight Cut) - 4.50"
• Square Tube Cutting at 45° - 3.75"

• Solid Round Cutting at 90 Degrees - 2.25"
• Solid Round Cutting at 45 Degrees - 2.25"
• Round Tube Cutting at 90 Degrees - 5.50"
• Round Tube Cutting at 45 Degrees - 5.0"

• Conveniently located speed and tension controls
• Included Equipment: Material hold down, Onboard Dust Blower, Foot Switch
• Integrated blade storage features slots for pre-loaded blades and a built-in wrench for changing blades
• Large 12-7/8” x 23” cast iron table provides a stable working surface while also limiting vibration
• Removable dust port on underside of table to collect dust at the source

• Adjustable Material Stop
• Automatic blade shut off switch stops the sawing process
• Built-in, self-propelled chip brush prevents chip build up in blade guides
• Hydraulic quick positioning vise for clamping of materials
• Integrated pressurized wash hose for easy machine cleaning

• HSS Steam tempered steel
• 62/64 HRc
• 350 x 32 x 5mm
• 360 teeth
• 2 pin holes are 11mm diameter / 63mm on center

• Bimetal
• 4/6T
• 1" X .035" X 144"

• Cast iron wheel guard
• CSA/CUS Certified
• Dust collection hook-up on spark arrester
• Following strict guidelines and electrical requirements, these JET saws are CSA/CUS certified
• Ground vise plates for extra grip

• Cast iron wheel guard
• CSA/CUS Certified
• Dust collection hook-up on spark arrester
• Following strict guidelines and electrical requirements, these JET saws are CSA/CUS certified
• Ground vise plates for extra grip

• Automatic CNC hydraulic circular cold saw performing cuts from 0° to 45° to the right and left produced according to the current safety standards.
• Additional Vice
• Variable Speed Inverter
• Stroke feeder material 39”