Searching thousands of products...

  • 11" Blade
  • Semi-Automatic operation - manual feed also available
  • Self centering vice
  • 2.75" Tube Capacity 
$10,662.97
$8,679.00

  • Max. Cutting Range (W x H) – 11.8” x 2.75” OR 5.9” x 3.9” with 18” Blade
  • Saw Spindle Speed: 3200 RPM
  • Feed Motor (Servo Motor): 2.7HP
  • Max. Feed Speed: Variable to 262 ft/min

  • 110/220V 1 PH (Prewired 110V)
  • 1.75 Horse Power
  • Maximum Rip Cut (Right) 36"
  • 4000 RPM
$3,086.17
$2,512.00

  • 2 HP Motor
  • 110/220V 1PH
  • Table Size 20"
  • 10" Blade
$4,528.51
$3,686.00

  • 41/4" Capacity
  • Pneumatic centering vise, hydraulic blade descent
  • Automatic shut-off and vise release
  • 220V, 3PH
$17,315.22
$14,829.00

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

$37,705.94
$30,999.00

  • 220 V 3 PH
  • 7.5 HP
  • Table Saw Arbor 1"
  • RPM 3000/4000/5000
$25,155.00
$20,475.00

  • 220V 1 PH
  • Table Saw 3850
  • Table Size 20"
  • Blade Diameter 10"
$4,263.14
$3,470.00

  • 12" Blade
  • 3600 RPM
  • Maximum rip cut (right) 52"
  • 220V, 1PH
$5,870.11
$4,778.00

  • Maximum Vice Opening: 120mm (4.70")
  • The NEW 350-S can run at 2 different speeds: 40-80 R.P.M.
  • The NEW 350-S is to be equipped with a 350mm (14") Blade.
  • Electrical: The NEW 350-S can be brought in at either 220 Volt / 3 Phase / 60Hz or 480 Volt / 3 Phase / 60Hz.

  • Maximum vice opening: 100mm (3.9")
  • The NEW 250 DV is to be equipped with a 250mm blade.
  • The NEW 250 DV can run at 2 different speeds: 40-80 R.P.M.
  • Solid Round Cutting at 90 Degrees - 1.50"

  • Maximum vice opening: 120mm (4.7")
  • The NEW 300 EDV is to be equipped with a 300mm blade.
  • The NEW 300 EDV can run at 2 different speeds: 40-80 R.P.M.
  • Solid Round Cutting at 90 Degrees - 2.0"

  • Maximum vice opening: 185mm (7.25")
  • The NTM 350-S can run at 2 different speeds: 33-66 R.P.M.
  • Square Tube Cutting at 90° (Straight Cut) - 3.75"
  • Square Tube Cutting at 45° Right - 3.50"

  • Maximum Vice Opening: 185mm (7.25")
  • The NTA 370 is to be equipped with a 370mm (14.5") Blade.
  • NTA 370 can run at 2 different speeds: 25-50 R.P.M. (Unless Equipped with Variable Speed Inverter)
  • Electrical: The NTA 370 can be brought in at either 220 Volt / 3 Phase / 60Hz or 480 Volt / 3 Phase / 60Hz.

  • Miters left and right 
  • Centering vise 
  • Cuts non-ferrous metals 
  • Blade turns at 3200 rpm

  • Cutting Capacity (Thickness x Width): 2″x33″, 4″x31″, 6″x29″, 8”x25”, 10”x20”, 12”x12”
  • Cycle Speed: 10-15 strokes/min
  • Cycle Operation: Pneumatic
  • Saw Blade Size: 36”

  • Cutting Capacity (Thickness x Width): 2″x33″, 4″x31″, 6″x29″, 8”x25”, 10”x20”, 12”x12”
  • Cycle Speed: 10-15 strokes/min
  • Cycle Operation: Pneumatic
  • Saw Blade Size: 36”

3 HP
4300 RPM
220 V 1PH
5/8" Saw Harbo

$4,807.40
$3,913.00

  • 220V, 1PH Motor
  • 4300 RPM
  • 3HP
  • 10" Blade
$4,959.74
$4,037.00

  • Cutting Capacity (Thickness x Width): 1″ x 10″, 2″ x 9″, 3″ x 8″
  • Cycle Speed: 95 strokes/min
  • Cycle Operation: Air
  • Saw Blade Size: 14″

  • Cutting Capacity (Thickness x Width): 2″ x 12″, 3″ x 11″, 4″ x 10″
  • Cycle Speed: 45 strokes/min
  • Cycle Operation: Air
  • Saw Blade Size (Optional): 18″

  • Cutting Capacity (Thickness x Width): 2″ x 12″, 3″ x 11″, 4″ x 10″
  • Cycle Speed: 45 strokes/min
  • Cycle Operation: Air
  • Saw Blade Size (Optional): 18″

  • Cutting Capacity (Thickness x Width): 2″x21″, 4″x19″, 6″x15″, 7″x8″
  • Cycle Speed: 40 strokes/min
  • Cycle Operation: Air / mechanical
  • Saw Blade Size: 24″ max. (20″ min.)

  • Cutting Capacity (Thickness x Width): 2″x21″, 4″x19″, 6″x15″, 7″x8″
  • Cycle Speed: 40 strokes/min
  • Cycle Operation: Air / mechanical
  • Saw Blade Size: 24″ max. (20″ min.)