Searching thousands of products...

• 220 V 3 PH
• 7.5 HP
• Table Saw Arbor 1"
• RPM 3000/4000/5000

• 220V 1 PH
• Table Saw 3850
• Table Size 20"
• Blade Diameter 10"

• 12" Blade
• 3600 RPM
• Maximum rip cut (right) 52"
• 220V, 1PH

• Maximum Vice Opening: 120mm (4.70")
• The NEW 350-S can run at 2 different speeds: 40-80 R.P.M.
• The NEW 350-S is to be equipped with a 350mm (14") Blade.
• Electrical: The NEW 350-S can be brought in at either 220 Volt / 3 Phase / 60Hz or 480 Volt / 3 Phase / 60Hz.

• 12"-14" 
• Dual Moveable 4" Screw Vises 
• Semi-Automatic, Air/Oil Power Down Feed 0-12FPM
• Dual Coolant Nozzels 

• Spindle RPM 2500
• Rugged Cast Iron Arm And Trunnion 
• 0-45 Degree Left or Right
• 3" Sraight Solid 

• Capacity: 1 .5″ solids, 2 1/2″ pipe
• 5/8″ arbor, sealed-for-life bearings,10″ abrasive wheel, 3 HP
• Available in 1 ph 110/220 or 3 ph 220/440
• Swivel cam vise opens 4″ – fast, lever-lock. Work length stop

• Maximum vice opening: 100mm (3.9")
• The NEW 250 DV is to be equipped with a 250mm blade.
• The NEW 250 DV can run at 2 different speeds: 40-80 R.P.M.
• Solid Round Cutting at 90 Degrees - 1.50"

• Maximum vice opening: 120mm (4.7")
• The NEW 300 EDV is to be equipped with a 300mm blade.
• The NEW 300 EDV can run at 2 different speeds: 40-80 R.P.M.
• Solid Round Cutting at 90 Degrees - 2.0"

• Maximum vice opening: 185mm (7.25")
• The NTM 350-S can run at 2 different speeds: 33-66 R.P.M.
• Square Tube Cutting at 90° (Straight Cut) - 3.75"
• Square Tube Cutting at 45° Right - 3.50"

• Maximum Vice Opening: 185mm (7.25")
• The NTA 370 is to be equipped with a 370mm (14.5") Blade.
• NTA 370 can run at 2 different speeds: 25-50 R.P.M. (Unless Equipped with Variable Speed Inverter)
• Electrical: The NTA 370 can be brought in at either 220 Volt / 3 Phase / 60Hz or 480 Volt / 3 Phase / 60Hz.

• Miters left and right 
• Centering vise 
• Cuts non-ferrous metals 
• Blade turns at 3200 rpm

3 HP
4300 RPM
220 V 1PH
5/8" Saw Harbo

• 220V, 1PH Motor
• 4300 RPM
• 3HP
• 10" Blade

• 14" Blade, 1" Arbor, 5HP 
• Mitres Either Direction 45 Degrees 
• Spindle RPM 4400 
• Heavy Duty Stand 

• Manual Operation 
• Dual 3" Vises 
• Internal Lite 
• Magnetic Switch 

• 14" Blade, 1" Arbor, 5HP 
• Mitres Either Direction 45 Degrees 
• Spindle RPM 4400 
• Heavy Duty Stand 

• Mitres left and right to 45 deg.
• Good for cutting aluminum and other non-ferrous material with steel blade
• Double air vises
• OHSA saferty blade guard

• 5HP Motor
• U.S.A Made
• 2200 RPM at Spindle
• 1" Spindle Arbor

• 20" Abrasive Wheel
• 1" Spindle w/ Sealed Ball Bearings
• 2500 RPM at Spindle
• Made in the U.S.A

• 20" Radial Abrasive Saw
• 2500 RPM at Spindle
• Foot Operated Chain Vise
• 1" Spindle Arbor

• 26" Wet Abrasive Chop Saw
• 1800 Spindle RPM
• 3Phase 220Volt or 440Volt
• 2HP

• Maximum vice opening: 180mm (7")
• The NTS 370 can run at 2 different speeds: 25-50 R.P.M.
• Square Tube Cutting at 90° (Straight Cut) - 4.50"
• Square Tube Cutting at 45° - 3.75"

• Solid Round Cutting at 90 Degrees - 2.25"
• Solid Round Cutting at 45 Degrees - 2.25"
• Round Tube Cutting at 90 Degrees - 5.50"
• Round Tube Cutting at 45 Degrees - 5.0"