Searching thousands of products...

  • Maximum Shear Width: 52”
  • Maximum Material Capacity: 12-Gauge
  • Pressure: 7-10 bar
  • Cutting Angle: 3°
  • Cuts per Minute: 15 (depending on profile)
  • Capacity (Mild Steel): 14 gauge 
  • Capacity (Stainless Steel): 18 gauge 
  • Cycle Speed: 20 strokes per minute 
  • Air Supply: 80-gallon tank needs 90 psi at 14 CFM
  • Capacity: 2 pcs, 14 gauge 
  • Electrical Requirements: 220V Single Phase 
  • Arms adjust 15” to 29”
  • Air regulator with moisture trap 
  • Capacity: 2 pcs, 14 gauge 
  • Electrical Requirements: 440V Single Phase 
  • Arms adjust 15” to 29”
  • Air regulator with moisture trap 
  • Shaft Diameter: 0.75”
  • Speed: 3000 rpm/3600 rpm
  • Wheel Diameter: 6”
  • Wheel Bore Size: 1.25”
$2,928.00
$2,298.58
  • Shaft Diameter: 0.75”
  • Speed: 3000 rpm/3600 rpm
  • Wheel Diameter: 6”
  • Wheel Bore Size: 1.25”
$2,928.00
$2,298.58
  • Shaft Diameter: 0.75”
  • Speed: 3000 rpm/3600 rpm
  • Wheel Diameter: 6”
  • Wheel Bore Size: 1.25”
$2,928.00
$2,298.58
  • Frequency: 50.00 Hz/60.00 Hz
  • Shaft Diameter: 0.75”
  • Speed: 3000 rpm/3600 rpm
  • Wheel Bore Size: 1.25”
$3,294.00
$2,557.19
  • Frequency: 50.00 Hz/60.00 Hz
  • Shaft Diameter: 0.75”
  • Speed: 3000 rpm/3600 rpm
  • Wheel Bore Size: 1.25”
$3,294.00
$2,557.19
  • Frequency: 50.00 Hz/60.00 Hz
  • Shaft Diameter: 0.75”
  • Speed: 3000 rpm/3600 rpm
  • Wheel Bore Size: 1.25”
$3,294.00
$2,557.19
  • Capacity: 24 Ga. Mild Steel
  • Throat: 7"
  • Throat: Pedestal Stand 
  • UPS Capable 
  • Motor: 220V Single Phase
  • Table Work Area: 28.4” x 63”
  • Max Gantry Clearance: 9.25”
  • Spindle Speed: 0-24,000 RPM
  • Motor: 220V Single Phase
  • Table Area: 28.4” x 39”
  • Gantry Clearance (from table): 6.5”
  • Spindle Speed: 0-24,000 RPM
  • Motor: 220V Single Phase
  • Table Area: 28.4” x 51”
  • Gantry Clearance (from table): 6.5”
  • Spindle Speed: 0-24,000 RPM
  • Motor: 220V Single Phase
  • Table Area: 28.4” x 63”
  • Gantry Clearance (from table): 6.5”
  • Spindle Speed: 0-24,000 RPM
  • Motor: 220V Single Phase
  • Table Work Area: 51.18” x 69.29”
  • Max Gantry Clearance: 9.25”
  • Spindle Speed: 0-24,000 RPM