Palmgren

  • Motor: 1HP - 115V - 1PH - 60Hz
  • Swing Over Bed: 10"
  • Distance Between Centers: 21-5/8"
  • Number of Spindle Speeds: 6
MSRP: $3,834
$3,382.72
As low as $109.93/mo

  • Motor: 1 HP / 115 V / 60HZ / 1PH
  • Center Height: 5.51 in
  • Max Turning Diameter: 11.02 in
  • Distance Between Centers: 27.56 in
MSRP: $6,334
$5,588.60
As low as $181.62/mo

  • Motor: 2HP - 115/230V - 1PH - 60Hz
  • Distance Between Centers: 36"
  • Spindle Bore: 1-1/2"
  • Number of Spindle Speeds: 18
MSRP: $14,166
$12,499.64
As low as $406.23/mo

  • Lathe Motor: 1PH - 115V - 13.6 Amps - 1PH - 60 Hz
  • Height of Centers: 4-3/4"
  • Max Turning Diameter: 9-7/8"
  • Distance Between Centers: 20"
MSRP: $5,834
$5,147.42
As low as $167.29/mo

  • Motor: 1 HP / 115 V / 60HZ / 1PH
  • Center Height: 4.92 in
  • Distance Between Centers: 21.65 in
  • Turning Diameter: 9.84 in
MSRP: $3,666
$3,234.93
As low as $105.13/mo

  • Motor: ¾ HP Single Phase
  • RPM: 3600
  • Table Size: 6" x 12"
  • Wheel Size (Dia x W x Bore): 7" x 1/2" x 1-1/4"
MSRP: $8,333
$7,843.14
As low as $254.90/mo

  • Motor: 1HP - 120/240V - 1PH - 60Hz
  • Speeds: 86-132-178-260 fpm
  • Max. Thickness of Cut: 7"
  • RPM: 1725
$2,199
As low as $71.46/mo

  • Motor: 7/8HP - 115V - 1PH - 60Hz
  • Distance Between Centers: 12"
  • Spindle Bore: 3/4"
  • Bed Width: 3-15/16"
MSRP: $2,666
$2,499
As low as $81.21/mo

  • Motor: 1.20HP / 115V / 1PH
  • Drilling Capacity max.: Ø 16 mm / 5/8 in
  • Gear Stages: 2 stages, continuously variable
  • Head Travel: 280 mm / 11.024 in
MSRP: $3,911
$3,450.59
As low as $112.14/mo

  • Max Load Horizontal: 310 lbs.
  • Max Load Vertical: 133 lbs.
  • Gear Ratio: 90 to 1 in
  • Center Hole: MT-4
MSRP: $4,161
$3,182.02
As low as $103.41/mo

  • Motor: 6HP - 230V - 3PH - 60Hz
  • Distance Between Centers: 60"
  • Number of Spindle Speeds: 16
  • Compound Travel: 5-1/2"
MSRP: $33,334
$29,412.13
As low as $582.06/mo

  • Jaw Width           6 in
  • Jaw Opening      8- 3/4 in
  • Throat Depth     1- 3/4 in
  • Equipped with Dual Force anti-lift mechanism
MSRP: $2,314
$1,799
As low as $58.46/mo

  • Extra wide speed range
  • Miter Capacity: 90°
  • Throat Depth: 18”
  • Motor: 1-1/2 HP 115/230V Single Phase
MSRP: $3,508
$3,095.67
As low as $100.60/mo

  • Spindle Taper: MT 6
  • Number of Spindle Speeds: 8
  • Spindle Speed: 70 - 2000 RPM
  • Spindle Seat: Camlock D1-5
MSRP: $14,834
$13,088.60
As low as $425.37/mo

  • Capacity Cast Iron: 9/16 in
  • RPM: 120-3605
  • Spindle Taper: MT3
  • Spindle Travel: 5 in
MSRP: $2,667
$2,569
As low as $83.49/mo

  • Capacity Steel: 1"
  • Capacity Cast Iron: 1-1/8"
  • Power Feed: No
  • Number Of Speeds: 8
MSRP: $7,632
$7,182.66
As low as $233.43/mo

  • Spindle Taper: MT 5
  • Number of Spindle Speeds: 8 or 16
  • Spindle Speed: 70 - 2000 RPM
  • Spindle Seat: Camlock D1-4
MSRP: $21,666
$19,117.28
As low as $378.33/mo

  • Parallel arm with 8" to 55" reach
  • Torque @ 90 PSI: 30 ft/lb.
  • Max Tap Capacity/Mold Steel: 5/8
  • Max Tap Capacity/Aluminum: 3/4
MSRP: $3,087
$2,724.15
As low as $88.53/mo

  • Swing: 13-1/2"
  • Motor: 5/8HP - 240V -1PH - 10Amp - 60Hz
  • Table Work Surface: 15-3/4" x 4-3/4"
  • Spindle to Table: 8-1/4"
MSRP: $3,129
$2,761.18
As low as $89.73/mo

  • Total Length Of Bed: 60"
  • Spindle Nose Mounting: Camlock D1-4
  • Spindle Bore: 1-9/16"
  • Max. Size Cutting Tool: 1/2"
MSRP: $21,053
$19,814.25
As low as $392.12/mo

  • Extra wide speed range
  • Miter Capacity: 90°
  • Throat Depth: 15”
  • Motor: 1 HP 115/230V Single Phase
MSRP: $2,807
$2,477.09
As low as $80.50/mo

  • Swing Over Bed: 22"
  • Distance Between Centers: 80"
  • Spindle Taper: MT7
  • Spindle Bore: 4-1/8"
MSRP: $48,334
$42,647.42
As low as $843.99/mo

  • Torque @ 90 PSI: 27 ft/lb
  • Air Consumption: 24 CFM
  • Max Tap Capacity/Mold Steel: 1/2
  • Max Tap Capacity/Aluminum: 9/16
MSRP: $2,245
$1,981.12
As low as $64.38/mo

  • Ram Size: 10"
  • Throat Capacity: 19" x 12"
  • Largest Arbor Extension: 10"
  • Maximum Work Diameter: 19.5" x 19.5"
MSRP: $4,911
$4,044.56
As low as $131.44/mo

Founded in 1919 and since then have been creating superior quality machines for their customers. Palmgren is located in Naperville, IL. They use innovative designs and patents to improve their metalworking machines. Some of the many machines that they sell include belt grinders, drill sharpeners, and finishing machines. 

If you are interested in belt grinders or anything else Palmgren has to offer, please contact us. Here at Elite Metal Tools we work as a team to provide our customers with the best customer service and low prices.